IEC TR 63289:2020
(Main)Conceptual model for TC 100 standardization on multimedia cyber technology
Conceptual model for TC 100 standardization on multimedia cyber technology
IEC TR 63289:2020 describes the cases of the multimedia cyber technology, including IoT or CPS, within the scope of TC 100, and possible standardization items.
General Information
Standards Content (Sample)
IEC TR 63289 ®
Edition 1.0 2020-09
TECHNICAL
REPORT
colour
inside
Conceptual model for TC 100 standardization on multimedia cyber technology
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and once 67 000 electrotechnical terminology entries in English and
a month by email. French extracted from the Terms and Definitions clause of IEC
publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or need CISPR.
further assistance, please contact the Customer Service
Centre: sales@iec.ch.
IEC TR 63289 ®
Edition 1.0 2020-09
TECHNICAL
REPORT
colour
inside
Conceptual model for TC 100 standardization on multimedia cyber technology
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 33.160.60 ISBN 978-2-8322-8914-3
– 2 – IEC TR 63289:2020 © IEC 2020
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 Cyber-physical system in TC 100 . 7
5 Cases of audio and video services . 10
5.1 General . 10
5.2 Home music service . 10
5.3 Home video service . 13
5.4 Car audio and video system . 14
5.5 Cable and network video system . 15
6 Cases of other services . 16
6.1 General . 16
6.2 Service with distributed system . 16
6.3 AI assisted Information services . 17
6.4 AI Speaker . 18
6.5 AR/VR/MR/SR and XR . 18
6.5.1 General . 18
6.5.2 Consumer usage . 18
6.5.3 Industrial usage . 19
6.5.4 VR/AR/MR/SR and XR Contents Distribution Platform . 20
6.6 Connected car . 21
6.7 AAL . 21
6.8 Personal wellness care . 22
7 Environmental aspect . 22
8 Safety aspects . 22
9 Possible study items . 23
9.1 General . 23
9.2 Methodology of computing data to provide good quality reproduction . 23
9.3 Measurement method for the minimum client devices and systems . 23
9.4 Management method for devices and systems in network . 23
9.5 Unified management method for content . 23
9.6 Digital signal processing schemes . 23
9.7 Measurement and management method for devices and systems using
AR/VR/MR/SR and XR technology . 24
9.8 QoS of network . 24
9.9 Big data processing with AI . 24
9.10 Content/data recognition or categorization with AI . 24
Bibliography . 25
Figure 1 – Cyber-physical system model . 8
Figure 2 – TC 100 model from IEC 61998:2015. 9
Figure 3 – TC 100 model and user communication from IEC 61998:2015 . 9
Figure 4 – Current status of activities related with cyber-physical system . 10
Figure 5 – Typical music-listening scene . 11
Figure 6 – The primary client in the past and now . 12
Figure 7 – The primary client now and the future . 13
Figure 8 – Car audio systems consist of car main AV device and smartphone . 15
Figure 9 – CCIS . 15
Figure 10 – Virtual STB . 16
Figure 11 – Virtual CPE and cloud storage. 16
Figure 12 – An example of Distribution system with IoT . 17
Figure 13 – Examples of AI assisted Information services . 18
Figure 14 – An example of VR for consumer usage . 19
Figure 15 – An example of AR for industrial usage . 19
Figure 16 – XR system model . 20
Figure 17 – Contents distribution platform . 20
Figure 18 – Reducing e-waste . 22
– 4 – IEC TR 63289:2020 © IEC 2020
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
CONCEPTUAL MODEL FOR TC 100 STANDARDIZATION
ON MULTIMEDIA CYBER TECHNOLOGY
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
The main task of IEC technical committees is to prepare International Standards. However, a
technical committee may propose the publication of a Technical Report when it has collected
data of a different kind from that which is normally published as an International Standard, for
example "state of the art".
IEC TR 63289, which is a Technical Report, has been prepared by IEC technical committee
100: Audio, video and multimedia systems and equipment.
The text of this Technical Report is based on the following documents:
Draft TR Report on voting
100/3442/DTR 100/3468/RVDTR
Full information on the voting for the approval of this Technical Report can be found in the
report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this da
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.