IEC 60095-4:2008
(Main)Lead-acid starter batteries - Part 4: Dimensions of batteries for heavy vehicles
Lead-acid starter batteries - Part 4: Dimensions of batteries for heavy vehicles
This part of IEC 60095 is applicable to lead-acid batteries used for starting, lighting and ignition of heavy trucks, commercial vehicles, busses and agricultural trucks. This second edition cancels and replaces the first edition published in 1989 and its Amendment 1 (1996). It constitutes a technical revision. The main technical changes in this new edition relate to the reduction of the number of European battery types, the standardization of dimensions and locations of battery terminals and the updating and inclusion in the standard of Amendment 1(1996), related to North America & East Asian battery types.
Batteries d'accumulateurs de démarrage au plomb - Partie 4: Dimensions des batteries pour poids lourds
Cette partie de la CEI est applicable aux batteries au plomb prévues pour le démarrage, l'éclairage et l'allumage des poids lourds, véhicules commerciaux, autobus et engins agricoles. Cette seconde édition annule et remplace la première édition publiée en 1989 et son Amendement 1 (1996). Elle constitue une révision technique. Les principaux changements techniques dans cette nouvelle édition concernent la réduction du nombres de types de batteries européennes, la normalisation des dimensions et les emplacements des bornes de batteries ainsi que la mise à jour et l'introduction dans la norme de l'Amendement 1 (1996) en relation avec les types de batteries d'Amérique du nord et d'Asie de l'Est.
General Information
Relations
Standards Content (Sample)
IEC 60095-4
Edition 2.0 2008-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Lead-acid starter batteries –
Part 4: Dimensions of batteries for heavy vehicles
Batteries d'accumulateurs de démarrage au plomb –
Partie 4: Dimensions des batteries pour poids lourds
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.
IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
ƒ Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
ƒ Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
ƒ Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
ƒ Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: csc@iec.ch
Tél.: +41 22 919 02 11
Fax: +41 22 919 03 00
IEC 60095-4
Edition 2.0 2008-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Lead-acid starter batteries –
Part 4: Dimensions of batteries for heavy vehicles
Batteries d'accumulateurs de démarrage au plomb –
Partie 4: Dimensions des batteries pour poids lourds
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
Q
CODE PRIX
ICS 29.220.20; 43.040.10 ISBN 2-8318-9621-5
– 2 – 60095-4 © IEC:2008
CONTENTS
FOREWORD.3
1 Scope and object.5
2 Normative references .5
3 Terms and definitions .5
4 Common features .5
4.1 Labelling .5
4.2 Marking of polarity.6
4.3 Marking of plastic material.6
4.4 Dimensions and design .7
5 European types .7
5.1 General .7
5.2 Dimensions .7
6 North American types .10
6.1 General .10
6.2 Dimensions .10
7 East Asian types.13
7.1 General .13
7.2 Dimensions .15
Bibliography.17
Figure 1 – Marking of polarity .6
Figure 2 – Marking of polypropylene .6
Figure 3 – Dimensions ( mm) of positive and negative terminals .8
Figure 4 – EU series – Type D2 .9
Figure 5 – EU series – Types A,B,C.9
Figure 6 – AM series – Type 4D.11
Figure 7 – Dimensions ( mm) of tapered terminal.11
Figure 8 – AM series – Type 8D.12
Figure 9 – AM series – Type 31T .12
Figure 10 – Dimensions of stud terminal .13
Figure 11 – AM series – Type 31A .13
Figure 12 – Dimensions (mm) of tapered terminal .14
Figure 13 – AS series – Type E 41.15
Figure 14 – AS series – Types F51, G51 and H52.16
Table 1 – EU series – Dimensions of batteries.8
Table 2 – AM series – Dimensions of batteries .10
Table 3 – Dimensions of tapered terminal .14
Table 4 – AS series – Dimensions of batteries .15
60095-4 © IEC:2008 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
_____________
LEAD-ACID STARTER BATTERIES –
Part 4: Dimensions of batteries for heavy vehicles
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60095-4 has been prepared by IEC technical committee 21:
Secondary cells and batteries.
This second edition cancels and replaces the first edition published in 1989 and its
Amendment 1 (1996).It constitutes a technical revision. The main technical changes in this new
edition relate to the reduction of the number of European battery types, the standardization of
dimensions and locations of battery terminals and the updating and inclusion in the standard of
Amendment 1(1996), related to North America & East Asian battery types.
The text of this standard is based on the following documents:
FDIS Report on voting
21/667/FDIS 21/669/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
– 4 – 60095-4 © IEC:2008
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of the IEC 60095 series, published under the general title Lead-acid starter
batteries, can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
60095-4 © IEC:2008 – 5 –
LEAD-ACID STARTER BATTERIES –
Part 4: Dimensions o
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.