Performance of high-voltage direct current (HVDC) systems with line-commutated converters - Part 2: Faults and switching

IEC/TR 60919-2:2008 provides guidance on the transient performance and fault protection requirements of high voltage direct current (HVDC) systems. It concerns the transient performance related to faults and switching for two-terminal HVDC systems utilizing 12-pulse converter units comprised of three-phase bridge (double way) connections but it does not cover multi-terminal HVDC transmission systems. However, certain aspects of parallel converters and parallel lines, if part of a two-terminal system, are discussed. The converters are assumed to use thyristor valves as the bridge arms, with gapless metal oxide arresters for insulation co-ordination and to have power flow capability in both directions. Diode valves are not considered in this report. This second edition cancels and replaces the first edition, published in 1991, and constitutes a technical revision. It includes the following main changes with respect to the previous edition: it concerns only line-commutated converters;isignificant changes have been made to the control system technology; some environmental constraints, for example audible noise limits, have been added; the capacitor coupled converters (CCC) and controlled series capacitor converters (CSCC) have been included.

Fonctionnement des systèmes à courant continu haute tension (CCHT) munis de convertisseurs commutés par le réseau - Partie 2: Défauts et manoeuvres

La CEI/TR 60919-2:2008 fournit des indications générales sur les performances de fonctionnement transitoire et sur les exigences de protection contre les défauts pour les systèmes à courant continu haute tension (CCHT). Il se rapporte au fonctionnement transitoire lié aux défauts et manoeuvres dans le cas des systèmes CCHT à deux extrémités, utilisant des convertisseurs à 12 impulsions comprenant des ponts de Graetz hexaphasés mais ne couvre pas les systèmes de transmission CCHT multiterminaux. Cependant, certains aspects liés à la mise en parallèle de convertisseurs et de lignes, s'ils relèvent d'un système à deux extrémités, seront également abordés. Les convertisseurs sont supposés utiliser des valves à thyristors dans les bras de pont, avec des parafoudres à oxyde métallique sans éclateur pour la coordination de l'isolement, et permettre le transport d'énergie dans les deux sens. Les valves à diode ne sont pas prises en considération dans le présent rapport. Cette deuxième édition annule et remplace la première édition, parue en 1991, et constitue une révision technique. Elle contient les changements fondamentaux suivants par rapport à l'édition précédente: elle ne concerne que les convertisseurs commutés par le réseau; des changements significatifs ont été effectués pour la technologie du système de contrôle; certaines limites environnementales ont été introduites, par exemple les niveaux de bruit audible maximaux; les convertisseurs connectés au travers de condensateurs (CCC) et les convertisseurs à condensateurs en série contrôles (CCSC) ont été ajoutés.

General Information

Status
Published
Publication Date
18-Jun-2015
Current Stage
PPUB - Publication issued
Start Date
15-Dec-2008
Completion Date
05-Nov-2008
Ref Project

Relations

Buy Standard

Technical report
IEC TR 60919-2:2008+AMD1:2015+AMD2:2020 CSV - Performance of high-voltage direct current (HVDC) systems with line-commutated converters - Part 2: Faults and switching Released:4/27/2020 Isbn:9782832282632
English language
130 pages
sale 15% off
Preview
sale 15% off
Preview
Technical report
IEC TR 60919-2:2008 - Performance of high-voltage direct current (HVDC) systems with line-commutated converters - Part 2: Faults and switching
English and French language
129 pages
sale 15% off
Preview
sale 15% off
Preview
Technical report
IEC TR 60919-2:2008+AMD1:2015 CSV - Performance of high-voltage direct current (HVDC) systems withline-commutated converters - Part 2: Faults and switching Released:6/19/2015 Isbn:9782832227626
English and French language
265 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC TR 60919-2 ®
Edition 2.2 2020-04
CONSOLIDATED VERSION
TECHNICAL
REPORT
colour
inside
Performance of high-voltage direct current (HVDC) systems with line-
commutated converters –
Part 2: Faults and switching
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and definitions clause of
IEC publications issued between 2002 and 2015. Some
IEC Customer Service Centre - webstore.iec.ch/csc entries have been collected from earlier publications of IEC
If you wish to give us your feedback on this publication or TC 37, 77, 86 and CISPR.

need further assistance, please contact the Customer Service

Centre: sales@iec.ch.
IEC TR 60919-2 ®
Edition 2.2 2020-04
CONSOLIDATED VERSION
TECHNICAL
REPORT
colour
inside
Performance of high-voltage direct current (HVDC) systems with line-

commutated converters –
Part 2: Faults and switching
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 29.200; 29.240.99 ISBN 978-2-8322-8263-2

IEC TR 60919-2 ®
Edition 2.2 2020-04
CONSOLIDATED VERSION
REDLINE VERSION
colour
inside
Performance of high-voltage direct current (HVDC) systems with line-
commutated converters –
Part 2: Faults and switching
– 2 – IEC TR 60919-2:2008+AMD1:2015
+AMD2:2020 CSV  IEC 2020
CONTENTS
FOREWORD . 6
1 Scope . 8
2 Normative references . 9
3 Outline of HVDC transient performance specifications . 9
3.1 Transient performance specifications . 9
3.2 General comment . 10
4 Switching transients without faults . 10
4.1 General . 10
4.2 Energization and de-energization of a.c. side equipment . 10
4.3 Load rejection . 12
4.4 Start-up and shut-down of converter units . 13
4.5 Operation of d.c. breakers and d.c. switches . 13
5 AC system faults . 16
5.1 General . 16
5.2 Fault categories . 16
5.3 Specification matters affecting transient performance . 16
5.3.1 Effective a.c. system impedance . 16
5.3.2 Power transfer during faults . 17
5.3.3 Recovery following fault clearing . 17
5.3.4 Reactive power consumption during fault and post-fault recovery
periods . 18
5.3.5 Load rejection due to a.c. faults . 18
5.3.6 Switching of reactive power equipment . 19
5.3.7 Effects of harmonic voltages and current during faults . 19
5.3.8 Shift in control modes of operation . 20
5.3.9 Power modulation on the HVDC system . 20
5.3.10 Emergency power reductions . 20
5.4 Specification impact on control strategy . 20
6 AC filters, reactive power equipment and a.c. bus faults . 22
6.1 General . 22
6.2 Transient overvoltages in filter banks . 22
6.3 Transient overcurrents in filter and capacitor banks . 23
6.4 Capacitor unbalance protection . 23
6.5 Examples of protection of filters and capacitor banks . 24
6.6 Shunt reactor protection . 25
6.7 AC bus protection . 25
7 Converter unit faults . 27
7.1 General . 27
7.2 Short circuits . 27
7.3 Failure of converter unit to perform its intended function . 29
7.3.1 General . 29
7.3.2 Rectifier operation . 29
7.3.3 Inverter operation . 29
7.4 Converter unit protection . 30
7.4.1 Converter differential protection . 30
7.4.2 Overcurrent protection . 30

+AMD2:2020 CSV  IEC 2020
7.4.3 AC overvoltage protection . 30
7.4.4 Protection against large delay angle operation . 30
7.4.5 Commutation failure protection . 30
7.4.6 Thyristor valve protections . 30
7.4.7 Transformer protection . 30
7.4.8 Transformer tap-changer unbalance protection . 31
7.4.9 AC connection earth fault protection . 31
7.5 Additional protection aspects of series connected converter units . 31
7.6 Additional protection aspects of parallel connected converter units . 31
8 DC reactor, d.c. filter and other d.c. equipment faults . 34
8.1 General . 34
8.2 Fault types . 34
8.3 Protection zones . 34
8.4 Neutral protection . 35
8.4.1 General . 35
8.4.2 Neutral fault detection . 35
8.4.3 Neutral bus fault isolation . 35
8.4.4 Bipolar neutral bus faults . 35
8.5 DC reactor protection . 36
8.6 DC harmonic filter protection . 36
8.6.1 General . 36
8.6.2 Filter bank fault protection . 36
8.6.3 DC filter capacitor unit protection. 37
8.7 DC harmonic protection . 37
8.8 DC overvoltage protection . 37
8.9 DC side switching protection . 37
9 DC line faults . 40
9.1 Overhead line faults . 40
9.2 Cable faults . 41
9.3 DC fault characteristics . 41
9.4 Functional d.c. fault detection requirements . 41
9.5 Protective sequence . 42
9.5.1 Overhead line faults . 42
9.5.2 Faults in cable systems . 42
9.5.3 Faults in an overhead line/cable system . 42
9.5.4 Faults in one of a system of parallel-connected cables . 42
9.5.5 Fault in a system of parallel overhead lines . 43
9.6 Fault protection schemes . 43
9.7 Open circuit on the d.c. side . 43
9.8 Power line cross protection . 44
10 Earth electrode line faults . 44
10.1 General . 44
10.2 Specific requirements – Earth electrode line . 44
10.3 Electrode line supervision . 45
11 Metallic return conductor faults . 45
11.1 Conductor for the return circuit . 45
11.2 Metallic return faults . 45
11.3 Fault detection – Metallic return .
...


IEC/TR 60919-2
Edition 2.0 2008-11
TECHNICAL
REPORT
RAPPORT
TECHNIQUE
Performance of high-voltage direct current (HVDC) systems with line-
commutated converters –
Part 2: Faults and switching
Fonctionnement des systèmes à courant continu haute tension (CCHT) munis
de convertisseurs commutés par le réseau –
Partie 2: Défauts et manœuvres

IEC/TR 60919-2:2008
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
ƒ Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
ƒ Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
ƒ Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
ƒ Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: csc@iec.ch
Tél.: +41 22 919 02 11
Fax: +41 22 919 03 00
IEC/TR 60919-2
Edition 2.0 2008-11
TECHNICAL
REPORT
RAPPORT
TECHNIQUE
Performance of high-voltage direct current (HVDC) systems with line-
commutated converters –
Part 2: Faults and switching
Fonctionnement des systèmes à courant continu haute tension (CCHT) munis
de convertisseurs commutés par le réseau –
Partie 2: Défauts et manœuvres

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
XB
CODE PRIX
ICS 29.200; 29.240.99 ISBN 978-2-88910-331-7
– 2 – TR 60919-2 © IEC:2008
CONTENTS
FOREWORD.6
1 Scope.8
2 Normative references .9
3 Outline of HVDC transient performance specifications .9
3.1 Transient performance specifications .9
3.2 General comment .10
4 Switching transients without faults.10
4.1 General .10
4.2 Energization and de-energization of a.c. side equipment .10
4.3 Load rejection .12
4.4 Start-up and shut-down of converter units .13
4.5 Operation of d.c. breakers and d.c. switches .13
5 AC system faults .15
5.1 General .15
5.2 Fault categories .16
5.3 Specification matters affecting transient performance.16
5.3.1 Effective a.c. system impedance.16
5.3.2 Power transfer during faults.16
5.3.3 Recovery following fault clearing .17
5.3.4 Reactive power consumption during fault and post-fault recovery
periods .18
5.3.5 Load rejection due to a.c. faults.18
5.3.6 Switching of reactive power equipment .19
5.3.7 Effects of harmonic voltages and current during faults .19
5.3.8 Shift in control modes of operation .19
5.3.9 Power modulation on the HVDC system.20
5.3.10 Emergency power reductions.20
5.4 Specification impact on control strategy .20
6 AC filters, reactive power equipment and a.c. bus faults .21
6.1 General .21
6.2 Transient overvoltages in filter banks .21
6.3 Transient overcurrents in filter and capacitor banks.22
6.4 Capacitor unbalance protection .23
6.5 Examples of protection of filters and capacitor banks .23
6.6 Shunt reactor protection .24
6.7 AC bus protection.24
7 Converter unit faults .27
7.1 General .27
7.2 Short circuits .27
7.3 Failure of converter unit to perform its intended function .28
7.3.1 General .28
7.3.2 Rectifier operation .28
7.3.3 Inverter operation .29
7.4 Converter unit protection .29
7.4.1 Converter differential protection.29
7.4.2 Overcurrent protection.29

TR 60919-2 © IEC:2008 – 3 –
7.4.3 AC overvoltage protection .29
7.4.4 Protection against large delay angle operation .29
7.4.5 Commutation failure protection .30
7.4.6 Thyristor valve protections.30
7.4.7 Transformer protection .30
7.4.8 Transformer tap-changer unbalance protection.30
7.4.9 AC connection earth fault protection .30
7.5 Additional protection aspects of series connected converter units .30
7.6 Additional protection aspects of parallel connected converter units .31
8 DC reactor, d.c. filter and other d.c. equipment faults .33
8.1 General .33
8.2 Fault types .34
8.3 Protection zones .34
8.4 Neutral protection.34
8.4.1 General .34
8.4.2 Neutral fault detection .34
8.4.3 Neutral bus fault isolation .35
8.4.4 Bipolar neutral bus faults .35
8.5 DC reactor protection .35
8.6 DC harmonic filter protection .35
8.6.1 General .35
8.6.2 Filter bank fault protection .36
8.6.3 DC filter capacitor unit protection.36
8.7 DC harmonic protection.36
8.8 DC overvoltage protection .36
8.9 DC side switching protection .37
9 DC line faults.38
9.1 Overhead line faults .38
9.2 Cable faults .39
9.3 DC fault characteristics .39
9.4 Functional d.c. fault detection requirements .40
9.5 Protective sequence.40
9.5.1 Overhead line faults .40
9.5.2 Faults in cable systems .40
9.5.3 Faults in an overhead
...


IEC TR 60919-2 ®
Edition 2.1 2015-06
CONSOLIDATED VERSION
TECHNICAL
REPORT
RAPPORT
TECHNIQUE
colour
inside
Performance of high-voltage direct current (HVDC) systems with line-
commutated converters –
Part 2: Faults and switching
Fonctionnement des systèmes à courant continu haute tension (CCHT) munis
de convertisseurs commutés par le réseau –
Partie 2: Défauts et manoeuvres

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing more than 30 000 terms and
Technical Specifications, Technical Reports and other definitions in English and French, with equivalent terms in 15
documents. Available for PC, Mac OS, Android Tablets and additional languages. Also known as the International
iPad. Electrotechnical Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a More than 60 000 electrotechnical terminology entries in
variety of criteria (reference number, text, technical English and French extracted from the Terms and Definitions
committee,…). It also gives information on projects, replaced clause of IEC publications issued since 2002. Some entries
and withdrawn publications. have been collected from earlier publications of IEC TC 37,

77, 86 and CISPR.
IEC Just Published - webstore.iec.ch/justpublished

Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient plus de 30 000 termes et définitions en
Spécifications techniques, Rapports techniques et autres
anglais et en français, ainsi que les termes équivalents dans
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
15 langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.

Recherche de publications IEC - www.iec.ch/searchpub
Glossaire IEC - std.iec.ch/glossary
La recherche avancée permet de trouver des publications IEC Plus de 60 000 entrées terminologiques électrotechniques, en
en utilisant différents critères (numéro de référence, texte, anglais et en français, extraites des articles Termes et
comité d’études,…). Elle donne aussi des informations sur les Définitions des publications IEC parues depuis 2002. Plus
projets et les publications remplacées ou retirées. certaines entrées antérieures extraites des publications des

CE 37, 77, 86 et CISPR de l'IEC.
IEC Just Published - webstore.iec.ch/justpublished

Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications IEC. Just
Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur cette
Disponible en ligne et aussi une fois par mois par email. publication ou si vous avez des questions contactez-nous:
csc@iec.ch.
IEC TR 60919-2 ®
Edition 2.1 2015-06
CONSOLIDATED VERSION
TECHNICAL
REPORT
RAPPORT
TECHNIQUE
colour
inside
Performance of high-voltage direct current (HVDC) systems with line-

commutated converters –
Part 2: Faults and switching
Fonctionnement des systèmes à courant continu haute tension (CCHT) munis

de convertisseurs commutés par le réseau –

Partie 2: Défauts et manoeuvres

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.200; 29.240.99 ISBN 978-2-8322-2762-6

IEC TR 60919-2 ®
Edition 2.1 2015-06
CONSOLIDATED VERSION
REDLINE VERSION
VERSION REDLINE
colour
inside
Performance of high-voltage direct current (HVDC) systems with line-
commutated converters –
Part 2: Faults and switching
Fonctionnement des systèmes à courant continu haute tension (CCHT) munis
de convertisseurs commutés par le réseau –
Partie 2: Défauts et manoeuvres

– 2 – IEC TR 60919-2:2008
+AMD1:2015 CSV  IEC 2015
CONTENTS
FOREWORD . 6
1 Scope . 8
2 Normative references . 9
3 Outline of HVDC transient performance specifications . 9
3.1 Transient performance specifications . 9
3.2 General comment . 10
4 Switching transients without faults . 10
4.1 General . 10
4.2 Energization and de-energization of a.c. side equipment . 10
4.3 Load rejection . 12
4.4 Start-up and shut-down of converter units . 13
4.5 Operation of d.c. breakers and d.c. switches . 13
5 AC system faults . 15
5.1 General . 15
5.2 Fault categories . 16
5.3 Specification matters affecting transient performance . 16
5.3.1 Effective a.c. system impedance . 16
5.3.2 Power transfer during faults . 16
5.3.3 Recovery following fault clearing . 17
5.3.4 Reactive power consumption during fault and post-fault recovery
periods . 18
5.3.5 Load rejection due to a.c. faults . 18
5.3.6 Switching of reactive power equipment . 19
5.3.7 Effects of harmonic voltages and current during faults . 19
5.3.8 Shift in control modes of operation . 19
5.3.9 Power modulation on the HVDC system . 20
5.3.10 Emergency power reductions . 20
5.4 Specification impact on control strategy . 20
6 AC filters, reactive power equipment and a.c. bus faults . 22
6.1 General . 22
6.2 Transient overvoltages in filter banks . 22
6.3 Transient overcurrents in filter and capacitor banks . 23
6.4 Capacitor unbalance protection . 23
6.5 Examples of protection of filters and capacitor banks . 24
6.6 Shunt reactor protection . 25
6.7 AC bus protection . 25
7 Converter unit faults . 27
7.1 General . 27
7.2 Short circuits . 27
7.3 Failure of converter unit to perform its intended function . 29
7.3.1 General . 29
7.3.2 Rectifier operation . 29
7.3.3 Inverter operation . 29
7.4 Converter unit protection . 30
7.4.1 Converter differential protection . 30
7.4.2 Overcurrent protection . 30

+AMD1:2015 CSV  IEC 2015
7.4.3 AC overvoltage protection . 30
7.4.4 Protection against large delay angle operation . 30
7.4.5 Commutation failure protection . 30
7.4.6 Thyristor valve protections . 30
7.4.7 Transformer protection . 30
7.4.8 Transformer tap-changer unbalance protection . 31
7.4.9 AC connection earth fault protection . 31
7.5 Additional protection aspects of series connected converter units . 31
7.6 Additional protection aspects of parallel connected converter units . 31
8 DC reactor, d.c. filter and other d.c. equipment faults . 34
8.1 General . 34
8.2 Fault types . 34
8.3 Protection zones . 34
8.4 Neutral protection . 35
8.4.1 General . 35
8.4.2 Neutral fault detection . 35
8.4.3 Neutral bus fault isolation . 35
8.4.4 Bipolar neutral bus faults
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.