IEC 60092-306:2009

Electrical installations in ships - Part 306: Equipment - Luminaires and lighting accessories

IEC 60092-306:2009(E) applies to luminaires and lighting accessories for use in ships. It applies primarily to luminaires for illumination purposes. NOTE - Boats, submarines (except naval submarines), watercraft and floating equipment are ships to which this standard applies. This standard also applies to lighting accessories associated with the wiring and current consuming appliance of an installation. This standard does not apply to portable luminaires, navigation lights, search lights, daylight signalling lamps, signal lights including the relevant control and monitoring equipment and other lights used for navigation in channels, harbours, etc. This edition includes the following significant technical changes with respect to the previous edition.
a) Title has been amended;
b) Scope has been stated more precisely;
c) Requirements on mechanical design and materials have been amended and stated more precisely;
d) Table 2 - Standard types of lampholders, has been amended;
e) Environmental tests, especially regarding shock and vibration have been added;
f) Requirements and tests concerning special chemical and physical attributes have been added;
g) Standard has been editorially revised.

General Information

• Status: Published
• Publication Date: 25-Nov-2009
• ICS: 01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
• ICS: 47.020.60 - Electrical equipment of ships and of marine structures
• Technical Committee: TC 18 - Electrical installations of ships and of mobile and fixed offshore units
• Current Stage: DELPUB - Deleted Publication
• Start Date: 30-Jun-2017
• Completion Date: 13-Oct-2022

Relations

• Revised: IEC 60092-306:2022 - Electrical installations in ships - Part 306: Equipment - Luminaires and lighting accessories
• Effective Date: 05-Sep-2023

Standards Content (Sample)

IEC 60092-306 ®
Edition 4.0 2009-11
INTERNATIONAL
STANDARD
Electrical installations in ships –
Part 306: Equipment – Luminaires and lighting accessories

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: [e-mail]
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: [e-mail]
Tel.: [phone]
Fax: [phone]
IEC 60092-306 ®
Edition 4.0 2009-11
INTERNATIONAL
STANDARD
Electrical installations in ships –
Part 306: Equipment – Luminaires and lighting accessories

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
R
ICS 47.020.60 ISBN 978-2-88910-053-8
– 2 – 60092-306 © IEC:2009(E)
CONTENTS
FOREWORD.4
INTRODUCTION.6
1 Scope.7
2 Normative references .7
3 Terms and definitions .9
4 Requirements on luminaires .9
4.1 General .9
4.2 Mechanical requirements.9
4.2.1 Design.9
4.2.2 Materials .10
4.3 Electrical requirements.10
4.3.1 Electrical safety.10
4.3.2 Luminaires for use on IT power distribution systems.10
4.3.3 Electromagnetic compatibility .10
4.4 Illumination technology.10
4.5 Environmental conditions .11
4.6 Special requirements on discharge lamp luminaires .11
4.7 Component parts.11
4.8 Lampholders .11
4.9 Marking .12
5 Requirements on lighting accessories.13
5.1 General .13
5.2 Enclosures .13
5.3 Ceiling roses .13
6 Requirements on socket-outlets and plugs for luminaires connection.13
7 Tests .14
7.1 General .14
7.2 Environmental tests.14
7.2.1 Vibration exposure .14
7.2.2 Shock exposure.14
7.2.3 Climatic exposure.15
7.2.4 Storage during climatic exposure.15
7.2.5 Special chemical and physical attributes.16
7.3 Electrical tests.16
7.3.1 High voltage test .16
7.3.2 Insulation resistance.17
7.4 Coating thickness.17
8 Packaging and marking .17
Bibliography.18

Table 1 – Special requirements on component parts .11
Table 2 – Standard types of lampholders .12
Table 3 – Vibration exposure .14
Table 4 – Shock exposure .15
Table 5 – Climatic conditions, operation.15

60092-306 © IEC:2009(E) – 3 –
Table 6 – Exposure to climatic conditions, storage.16
Table 7 – Special chemical and physical attributes of non-metallic materials .16
Table 8 – High voltage test .17
Table 9 – Insulation resistance .17

– 4 – 60092-306 © IEC:2009(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ELECTRICAL INSTALLATIONS IN SHIPS –

Part 306: Equipment –
Luminaires and lighting accessories

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60092-306 has been prepared by IEC technical committee 18:
Electrical installations of ships and of mobile and fixed offshore units.
This fourth edition cancels and replaces the third edition published in 1980. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition.
a) Title has been amended;
b) Scope has been stated more precisely;
c) Requirements on mechanical design and materials have been amended and stated more
precisely;
d) Table 2 – Standard types of lampholders, has been amended;
e) Environmental tests, especially regarding shock and vibration have been added;

60092-306 © IEC:2009(E) – 5 –
f) Requirements and tests concerning special chemical and physical attributes have been
added;
g) Standard has been editorially revised.
The text of this standard is based on the following documents:
FDIS Report on voting
18/1137/FDIS 18/1143/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of the IEC 60092 series, published under the general title Electrical
installations in ships, can be found on the IEC web site.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance date indicated on the IEC web site under “http://webstore.iec.ch” in the data
related to the specific publication. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.

– 6 – 60092-306 © IEC:2009(E)
INTRODUCTION
IEC 60092 forms a series of international standards for electrical installations in sea-going
ships, incorporating good practice and coordinating, as far as possible, existing rules.
These standards form a code of practical interpretation and amplification of the requirements
of the International Convention for the Safety of Life at Sea, a guide for future regulations
which may be prepared and a statement of practice for use by shipowners, shipbuilders and
appropriate organizations.
60092-306 © IEC:2009(E) – 7 –
ELECTRICAL INSTALLATIONS IN SHIPS –

Part 306: Equipment –
Luminaires and lighting accessories

1 Scope
This International Standard applies to
...