IEC 60700-1:2015/AMD1:2021
(Amendment)Amendment 1 - Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing
Amendment 1 - Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing
Amendement 1 - Valves à thyristors pour le transport d'énergie en courant continu à haute tension (CCHT) - Partie 1: Essais électriques
General Information
Relations
Standards Content (Sample)
IEC 60700-1 ®
Edition 2.0 2021-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AM ENDMENT 1
AM ENDEMENT 1
Thyristor valves for high voltage direct current (HVDC) power transmission –
Part 1: Electrical testing
Valves à thyristors pour le transport d'énergie en courant continu à haute
tension (CCHT) –
Partie 1: Essais électriques
IEC 60700-1:2015-07/AMD1:2021-09(en-fr)
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform IEC online collection - oc.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always
committee, …). It also gives information on projects, replaced have access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 000 terminological entries in English
details all new publications released. Available online and
and French, with equivalent terms in 18 additional languages.
once a month by email.
Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or
need further assistance, please contact the Customer Service
Centre: sales@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.
Recherche de publications IEC - IEC online collection - oc.iec.ch
webstore.iec.ch/advsearchform Découvrez notre puissant moteur de recherche et consultez
La recherche avancée permet de trouver des publications IEC gratuitement tous les aperçus des publications. Avec un
en utilisant différents critères (numéro de référence, texte, abonnement, vous aurez toujours accès à un contenu à jour
comité d’études, …). Elle donne aussi des informations sur adapté à vos besoins.
les projets et les publications remplacées ou retirées.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
Le premier dictionnaire d'électrotechnologie en ligne au
Restez informé sur les nouvelles publications IEC. Just
monde, avec plus de 22 000 articles terminologiques en
Published détaille les nouvelles publications parues.
anglais et en français, ainsi que les termes équivalents dans
Disponible en ligne et une fois par mois par email.
16 langues additionnelles. Egalement appelé Vocabulaire
Electrotechnique International (IEV) en ligne.
Service Clients - webstore.iec.ch/csc
Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
sales@iec.ch.
IEC 60700-1 ®
Edition 2.0 2021-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AM ENDMENT 1
AM ENDEMENT 1
Thyristor valves for high voltage direct current (HVDC) power transmission –
Part 1: Electrical testing
Valves à thyristors pour le transport d'énergie en courant continu à haute
tension (CCHT) –
Partie 1: Essais électriques
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.200 ISBN 978-2-8322-1012-9
‒ 2 ‒ IEC 60700-1:2015/AMD1:2021
© IEC 2021
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
THYRISTOR VALVES FOR HIGH VOLTAGE DIRECT
CURRENT (HVDC) POWER TRANSMISSION –
Part 1: Electrical testing
AMENDMENT 1
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
Amendment 1 to IEC 60700-1:2015 has been prepared by subcommittee 22F: Power
electronics for electrical transmission and distribution systems, of IEC technical committee 22:
Power electronic systems and equipment.
The text of this amendment is based on the following documents:
Draft Report on voting
22F/604/CDV 22F/628/RVC
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
© IEC 2021
The language used for the development of this Amendment is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement,
available at www.iec.ch/members_experts/refdocs. The main document types developed by
IEC are described in greater detail at www.iec.ch/standardsdev/publications/.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
___________
2 Normative references
Replace the existing reference to IEC 61803:1999 and IEC 61803:1999/AMD1:2010, as well
as its associated footnote, with:
IEC 61803:2020, Determination of power losses in high-voltage direct current (HVDC)
converter stations with line-commutated converters
Replace the existing reference to ISO/IEC Guide 25, as well as its associated footnote, with:
ISO/IEC 17025, General requirements for the competence of testing and calibration
laboratories
3 Terms and definitions
3.1.4
valve protective firing
Delete the existing term and definition.
3.2 Valve construction terms
Delete subclause 3.2 and existing terms and definitions 3.2.1 to 3.2.7, without renumbering
subsequent subclauses.
6.3.2 Valve support d.c. voltage test
Replace, in the second sentence of the first paragraph, “50 % of the maximum test voltage”
with “50 % of 1 min test voltage”.
‒ 4 ‒ IEC 60700-1:2015/AMD1:2021
© IEC 2021
Delete, in the second sentence of the first paragraph, “in approximately 10 s”.
6.3.3 Valve support a.c. voltage test
Replace, in the second sentence of the first paragraph, “50 % of the maximum test voltage”
with “50 % of 1 min test voltage”.
Replace, in the second sentence of the first paragraph, “within approximately 10 s” with “in
approximately 10 s”.
7.2 Test object
Replace the existing second paragraph with the following new paragraph:
Individual valves may have to be short-circuited depending on the configuration of the MVU
and objectives of the tests. The stresses on the different valves in the MVU depend on
whether those valves belong to the same phase or to different phases.
7.3.1 MVU d.c. voltage test to earth
Replace, in the first sentence of the second paragraph, “50 % of the maximum test voltage”
with “50 % of 1 min test voltage”.
Delete in the first sentence of the second paragraph “in approximately 10 s”.
7.3.4 MVU lightning impulse test
Replace the existing last paragraph by the following new paragraph:
Subject to agreement between the purchaser and supplier, the MVU lightning impulse test
need not be performed, if it can be shown by other means that:
a) the external air clearances to other valves and to earth are adequate for the lightning
impulse voltage withstand level required, and
a) the lightning impulse withstand between any two terminals of the MVU is adequately
demonstrated by other tests.
8.1 Purpose of tests
Add, at the end of the existing subclause, the following new paragraph:
It should be also noted that the atmospheric correction is not needed in dielectric tests
between valve terminals. However, for valves installed at an altitude exceeding 1 000 m the
valve internal air clearance shall be verified by additional tests under the atmospheric
corrected test voltages. Thyristors and snubber circuits can be replaced by insulating blocks
in these tests.
© IEC 2021
8.3.1 Valve d.c. voltage test
Replace, in the first sentence of the second paragraph, “50 % of the maximum test voltage”
with “50 % of 1 min test voltage”.
Replace, in the first sentence of the second paragraph, “within approximately 10 s” with “in
approximately 10 s”.
Replace the existing formula with:
U = ±U × k
tdv dn 7
8.3.2 Valve a.c. voltage test
Replace, in the second sentence of the first paragraph, “50 % of the maximum test voltage”
with “50 % of 15 s test voltage”.
Replace, in the second sentence of the first paragraph, “within approximately 10 s” with “in
approximately 10 s”.
8.3.3 Valve impulse tests (general)
Replace, under the formula, the line for V with:
DSM
V is the non-repetitive peak off-state voltage of the thyristors;
DSM
9.3.2.4 Heat-run test
Replace, under the formula, "(see 5.1.4 of IEC 61803, 1999)" with "(see 5.1.5 of
IEC 61803:2020)".
9.3.6 Intermittent direct current tests
Replace the existing item b) with:
b) rectifier minimum α operation with mini
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.