IEC 61970-301:2020/AMD1:2022

Amendment 1 - Energy management system application program interface (EMS-API) - Part 301: Common information model (CIM) base

Amendement 1 - Interface de programmation d'application pour système de gestion d'énergie (EMS-API) - Partie 301: Base de modèle d'information commun (CIM)

General Information

• Status: Published
• Publication Date: 21-Feb-2022
• ICS: 33.200 - Telecontrol. Telemetering
• Technical Committee: TC 57 - Power systems management and associated information exchange
• Drafting Committee: WG 13 - TC 57/WG 13
• Current Stage: PPUB - Publication issued
• Start Date: 21-Jan-2022
• Completion Date: 22-Feb-2022

Relations

• Amends: IEC 61970-301:2020 - Energy management system application program interface (EMS-API) - Part 301: Common information model (CIM) base
• Effective Date: 05-Sep-2023

Standards Content (Sample)

IEC 61970-301 ®
Edition 7.0 2022-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
AMENDMENT 1
AMENDEMENT 1
Energy management system application program interface (EMS-API) –
Part 301: Common information model (CIM) base

Interface de programmation d'application pour système de gestion d'énergie
(EMS-API) –
Partie 301: Base de modèle d'information commun (CIM)

IEC 61970-301:2020-06/AMD1:2022-02(en-fr)

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et
les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Secretariat Tel.: [phone]
3, rue de Varembé [e-mail]
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always have
committee, …). It also gives information on projects, replaced access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 300 terminological entries in English
details all new publications released. Available online and once
and French, with equivalent terms in 19 additional languages.
a month by email.
Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or need
further assistance, please contact the Customer Service
Centre: [e-mail].
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Recherche de publications IEC - IEC Products & Services Portal - products.iec.ch
webstore.iec.ch/advsearchform Découvrez notre puissant moteur de recherche et consultez
La recherche avancée permet de trouver des publications IEC gratuitement tous les aperçus des publications. Avec un
en utilisant différents critères (numéro de référence, texte, abonnement, vous aurez toujours accès à un contenu à jour
comité d’études, …). Elle donne aussi des informations sur les adapté à vos besoins.
projets et les publications remplacées ou retirées.

Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
Le premier dictionnaire d'électrotechnologie en ligne au monde,
Restez informé sur les nouvelles publications IEC. Just
avec plus de 22 300 articles terminologiques en anglais et en
Published détaille les nouvelles publications parues.
français, ainsi que les termes équivalents dans 19 langues
Disponible en ligne et une fois par mois par email.
additionnelles. Egalement appelé Vocabulaire

Electrotechnique International (IEV) en ligne.
Service Clients - webstore.iec.ch/csc
Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
[e-mail].
IEC 61970-301 ®
Edition 7.0 2022-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
A MENDMENT 1
AM ENDEMENT 1
Energy management system application program interface (EMS-API) –

Part 301: Common information model (CIM) base

Interface de programmation d'application pour système de gestion d'énergie

(EMS-API) –
Partie 301: Base de modèle d'information commun (CIM)

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.200 ISBN 978-2-8322-1064-9

– 2 – IEC 61970-301:2020/AMD1:2022
© IEC 2022
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ENERGY MANAGEMENT SYSTEM APPLICATION
PROGRAM INTERFACE (EMS-API) –
Part 301: Common information model (CIM) base

AMENDMENT 1
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
Amendment 1 to IEC 61970-301:2020 has been prepared by IEC technical committee 57:
Power systems management and associated information exchange.
The text of this Amendment is based on the following documents:
Draft Report on voting
57/2439/FDIS 57/2450/RVD
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this Amendment is English.

© IEC 2022
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/standardsdev/publications/.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The "colour inside" logo on the cover page of this document indicates
that it contains colours which are considered to be useful for the correct understanding
of its contents. Users should therefore print this document using a colour printer.

_____________
4 CIM specification
4.1 Overview
Replace the existing text of the third bullet point in Subclause 4.1 by the following new text:
• iec61970cim17v40_iec61968cim13v13a_iec62325cim03v17a.eap

– 4 – IEC 61970-301:2020/AMD1:2022
© IEC 2022
Figure 12 – Transformer and Tank model
Replace the existing Figure 12 with the following new figure:

© IEC 2022
Figure 36 – Regulating control models
Replace the existing Figure 36 with the following new figure:

4.5.16 Feeder model
Replace, in the second sentence of the first paragraph of Subclause 4.5.16,
"ConductingEquipment" by "ConnectivityNodeContainer".
4.6.6 CIM profiles
Replace, in footnote 1, "http://www.CIMTool.org" with "https://cimug-org.github.io/CIMTool/".

– 6 – IEC 61970-301:2020/AMD1:2022
© IEC 2022
Table 141 – Attributes of Core::Terminal
Remove, in the first "description" row " GroundSwitch".
Table 151 – Association ends of Wires::AsynchronousMachine with other classes
Replace, in the first column of the fourth row of Table 151 (RegulatingControl), "1" with "0".
Table 186 – Association ends of Wires::ExternalNetworkInjection with other classes
Replace, in the first column of the first row of Table 186 (RegulatingControl), "1" with "0".
Table 188 – Association ends of Wires::FrequencyConverter with other classes
Replace, in the first column of the first row of Table 188, "1" with "0".
Table 204 – Association ends of Wires::LinearShuntCompensator with other classes
Replace, in the first column of the third row of Table 204 (RegulatingControl), "1" with "0".
Table 212 – Association ends of Wires::NonlinearShuntCompensator with other classes
Replace, in the first column of the fourth row of Table 212 (RegulatingControl), "1" with "0".
Table 252 – Association ends of Wires::PowerElectronicsConnection with other classes
Replace, in the first column of the fourth row of Table 252 (RegulatingControl), "1" with "0".
Table 272 – Association ends of Wires::RegulatingCondEq with other classes
Replace, in the first column of the first row of Table 272 (RegulatingControl), "1" with "0".
Table 274 – Association ends of Wires::RegulatingControl with other classes
Replace, in the third column of the second row of Table 274 (RegulatingCondEq), "1" with "0".
Table 279 – Association ends of Wires::RotatingMachine with other classes
Replace, in the first column of the third row of Table 279 (RegulatingControl), "1" with "0".
6.4.75 ShuntCompensator
Replace, in the second sentence of the first paragraph of Subclause 6.4.75,
"reactivePerSection" with "bPerSection".
Table 286 – Association ends of Wires::ShuntCompensator with other classes
Replace, in the first column of the third row of Table 286 (RegulatingControl), "1" with "0".
Table 291 – Association ends of Wires::StaticVarCompensator with other classes
Replace, in the first column of the second row of Table 291 (RegulatingControl), "1" with "0".
Table 300 – Association ends of Wires::SynchronousMachine with other classes
Replace, in the first column of the seventh row of Table 300 (RegulatingControl), "1" with "0".

© IEC 2022
Table 306 – Association ends of Wires::TapChangerControl with other classes
Replace, in the third column of the third row of Table 306 (RegulatingCondEq), "1" with "0".
Table 582 – Attributes of Meas::Control
Replace, in the fourth column of the fifth row of Table 582, the existing text with the following
new text:
Specifies the type of Control. F
...