Amendment 1 - Packaging of components for automatic handling - Part 2: Tape packaging of components with unidirectional leads on continuous tapes

Amendement 1 - Emballage de composants pour opérations automatisées - Partie 2: Emballage en bandes des composants à sorties unilatérales

General Information

Status

Published

Publication Date

21-Oct-2002

ICS

31.020 - Electronic components in general

31.240 - Mechanical structures for electronic equipment

Technical Committee

TC 40 - Capacitors and resistors for electronic equipment

Drafting Committee

WG 36 - TC 40/WG 36

Current Stage

DELPUB - Deleted Publication

Completion Date

11-Mar-2008

Ref Project

Relations

Amends

IEC 60286-2:1997 - Packaging of components for automatic handling - Part 2: Tape packaging of components with unidirectional leads on continuous tapes

Effective Date

05-Sep-2023

Revised

IEC 60286-2:2008 - Packaging of components for automatic handling - Part 2: Packaging of components with unidirectional leads on continuous tapes

Effective Date

05-Sep-2023

Buy Standard

IEC 60286-2:1997/AMD1:2002 - Amendment 1 - Packaging of components for automatic handling - Part 2: Tape packaging of components with unidirectional leads on continuous tapes
Released:10/22/2002
Isbn:2831866480

Standard

IEC 60286-2:1997/AMD1:2002 - Amendment 1 - Packaging of components for automatic handling - Part 2: Tape packaging of components with unidirectional leads on continuous tapes Released:10/22/2002 Isbn:2831866480

English and French language

3 pages

sale 15% off

Preview

sale 15% off

Preview

Standards Content (Sample)

IEC 60286-2:1997/AMD1:2002 - A...

NORME CEI
INTERNATIONALE IEC
60286-2
INTERNATIONAL
STANDARD
AMENDEMENT 1
AMENDMENT 1
2002-10
Amendement 1
Emballage de composants pour opérations
automatisées –
Partie 2:
Emballage en bandes des composants à sorties
unilatérales
Amendment 1
Packaging of components for automatic handling –
Part 2:
Tape packaging of components with unidirectional
leads on continuous tapes
 IEC 2002 Droits de reproduction réservés  Copyright - all rights reserved
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
B
Commission Electrotechnique Internationale
PRICE CODE
International Electrotechnical Commission
Международная Электротехническая Комиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

– 2 – 60286-2 Amend. 1  IEC:2002

AVANT-PROPOS
Le présent amendement a été établi par le comité d'études 40 de la CEI: Condensateurs et

résistances pour équipements électroniques.

Le texte de cet amendement est issu des documents suivants:

FDIS Rapport de vote
40/1244/FDIS 40/1292/RVD
Le rapport de vote indiqué dans le tableau ci-dessus donne toute information sur le vote ayant
abouti à l'approbation de cet amendement.
Le comité a décidé que le contenu de
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC

IEC 60286-3:2022(Main)

Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes

IEC 60286-3:2022 is applicable to the tape packaging of electronic components without leads or with lead stumps, intended to be connected to electronic circuits. It includes only those dimensions that are essential for the taping of components intended for the above-mentioned purposes. This document also includes requirements related to the packaging of singulated die products including bare die and bumped die (flip chips). This edition includes the following significant technical changes with respect to the previous edition:
addition terms and definitions.
addition of a table of the classification to symbols concerning drive hole diameter and distance between the reel hole centre and the drive hole centre;
addition of drive hole to the reel (optional);
revision of reel hole diameter tolerances;
revision of 72 mm tape size carrier tape width dimension tolerances;
addition of Annex B (informative);
addition of component size 0201M.

Standard
170 pages
English language
sale 15% off
Standard
113 pages
English and French language
sale 15% off

14-Nov-2022
31.020
31.240
TC 40

IEC

IEC 60286-2:2022(Main)

Packaging of components for automatic handling - Part 2: Tape packaging of components with unidirectional leads on continuous tapes

IEC 60286-2:2022 applies to the tape packaging of components with two or more unidirectional leads for use in electronic equipment. It provides dimensions and tolerances necessary to tape components with unidirectional leads. In general, the tape is applied to the component leads.
It covers requirements for taping techniques used with equipment for automatic handling, pre-forming of leads, insertion and other operations and includes only those dimensions which are essential to the taping of components intended for the above-mentioned purposes.
This edition includes the following significant technical changes with respect to the previous edition:
a) complete revision of structure;
b) consolidation of essential parameters and requirements in Clause 4.

Standard
70 pages
English and French language
sale 15% off

14-Nov-2022
31.020
31.240
TC 40

IEC

IEC TR 60286-3-4:2021/COR1:2022(Corrigendum)

Corrigendum 1 - Packaging of components for automatic handling - Part 3-4: Packaging of surface mount components on continuous embossed tapes for Auto Loading Feeder

Technical report
2 pages
English language
sale 15% off

23-Jun-2022
31.020
31.240
TC 40

IEC

IEC TR 60286-3-3:2021(Main)

Packaging of components for automatic handling - Part 3-3: Packaging of surface mount components on continuous paper tapes for Auto Loading Feeder

IEC TR 60286-3-3:2021(E) describes the possible requirements for paper taping for the Auto Loading Feeder mechanism to mount electronic components without leads or with stump type leads used for electric circuits. This document is applicable to the punched carrier tape with the bottom cover tape (nominal tape width: 8 mm only) among the tapes of Type 1a, and the pressed carrier tape (nominal tape width: 8 mm) of Type 1b in IEC 60286-3.

Technical report
22 pages
English language
sale 15% off

21-Oct-2021
31.020
31.240
TC 40

IEC

IEC TR 60286-3-4:2021(Main)

Packaging of components for automatic handling - Part 3-4: Packaging of surface mount components on continuous embossed tapes for Auto Loading Feeder

IEC TR 60286-3-4:2021(E) considers the proposed requirements for emboss taping for the Auto Loading Feeder mechanism to mount electric components without leads or with stump type leads used for electric circuits. This document is applicable to the embossed carrier tape, with single round sprocket holes, with tape pitches of 2 mm or more (nominal tape width: 8 mm only) among the tapes of Type 2a in IEC 60286-3.
The contents of the corrigendum of June 2022 have been included in this copy.

Technical report
26 pages
English language
sale 15% off

21-Oct-2021
31.020
31.240
TC 40

IEC

IEC 60286-1:2017/AMD1:2021(Amendment)

Amendment 1 - Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous tapes

Standard
9 pages
English and French language
sale 15% off

06-Apr-2021
31.020
31.240
TC 40

IEC

IEC TR 60286-7:2019(Main)

Packaging of components for automatic handling - Part 7: Introduction of a bulk blister pack for miniaturized components

IEC TR 60286-7:2019 contains information about the introduction of an innovative bulk blister packing system for miniaturized components, for example chip type components of size 1005 (metric) and smaller. It includes a proposal for standardization of the interface between the packaging and automatic assembly systems and requirements to the properties of the packaging.

Technical report
24 pages
English and French language
sale 15% off

13-Oct-2019
01
31.020
31.240
TC 40

IEC

IEC 60286-3:2019(Main)

Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes

IEC 60286-3:2019 is available as IEC 60286-3:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60286-3:2019 is applicable to the tape packaging of electronic components without leads or with lead stumps, intended to be connected to electronic circuits. It includes only those dimensions that are essential for the taping of components intended for the above-mentioned purposes. This document also includes requirements related to the packaging of singulated die products including bare die and bumped die (flip chips). This edition includes the following significant technical changes with respect to the previous edition:
- addition of a table of the classification to symbols concerning tape, reel and common symbols;
- additions of a figure of example of polarity and orientation and a figure of example of dot seal;
- revision of requirements for camber;
- addition of a definition of design value with regard to tilt.

Standard
125 pages
English language
sale 15% off
Standard
84 pages
English and French language
sale 15% off

IEC

IEC 61051-1:2018(Main)

Varistors for use in electronic equipment - Part 1: Generic specification

IEC 61051-1:2018 is available as IEC 61051-1:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61051-1:2018 is a generic specification and is applicable to varistors with symmetrical voltage-current characteristics for use in electronic equipment. It establishes standard terms, inspection procedures and methods of test for use in sectional and detail specifications for quality assessment or any other purpose. This edition includes the following significant technical changes with respect to the previous edition:
a) 10 new terms and definitions – leaded varistors, surface mount varistors(SMV), electrostatic discharge (ESD), ESD clamping voltage, equivalent rectangular pulse duration, maximum peak current derating characteristic, rated average dissipation power, rated energy, abnormal overvoltage withstanding duration and temperature derating curve – have been added (see 3.6, 3.7, 3.14, 3.15, 3.19, 3.20, 3.23, 3.24, 3.25 and 3.29);
b) General requirements for electrical tests and 7 new test items – clamping voltage, ESD clamping voltage, maximum peak current, rated average dissipation power, rated energy, electrostatic discharge (ESD), robustness of terminations of surface mount varistors – have been added (see 6.5, 6.11, 6.12, 6.13, 6.14, 6.15, 6.16 and 6.17.8);
c) In 6.6, 6.7, 6.8, 6.9.3, 6.23.2, 6.23.4 and 6.26, following test items have been revised:
- Varistor voltage, leakage current and capacitance: more detailed requirements and information have been added;
- Voltage proof – foil method: the space between the edge of the foil and each termination has been changed from 1 mm ~ 1,5 mm to 3 mm ~ 3.5 mm for testing varistors not having axial terminations and the minimum space between the foil and the termination has been changed from 1 mm to 3 mm for testing varistors having axial terminations;
- Climatic sequence – dry heat: the method has been changed from Ba to Bb;
- Climatic sequence – cold: the method has been changed from Aa to Ab;
- Endurance at upper category temperature: the method of “applying test voltages in cycles of 1,5 h on and 0,5 h off” has been changed to the method of applying test voltages continuously throughout the test lasting for 1 000 h;
d) The test items of pulse current, voltage under pulse condition and bump have been deleted from the section of test and measurement procedures;
e) Annex A and the contents referring to the test fixture specified in Annex A have been deleted;
f) All contents related to silicon carbide varistors have been deleted;
g) A new normative annex entitled “Test pulses used in this specification” (Annex B) has been added;
h) A new informative annex entitled "Recommended measurement/test methods for characteristics and parameters for application reference" (Annex C) has been added, in which guidelines of measuring/testing characteristics and parameters for application reference including voltage vs. current characteristic, maximum peak current derating characteristic, thermal resistance and abnormal overvoltage withstanding duration have been given.

Standard
184 pages
English language
sale 15% off
Standard
117 pages
English and French language
sale 15% off

IEC

IEC 60286-1:2017(Main)

Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous tapes

IEC 60286-1:2017 applies to the tape packaging of components with axial leads for use in electronic equipment. In general, the tape is applied to the component leads.
It covers requirements for taping techniques used with equipment for the preforming of leads, automatic handling, insertion and other operations, and includes only those dimensions which are essential to the taping of components intended for the above-mentioned purposes.
This edition includes the following significant changes with respect to the previous edition:
a) a complete revision of the structure (detailed in Annex A) and reworked layout.

Standard
12 pages
English language
sale 15% off
Standard
24 pages
English and French language
sale 15% off
Standard
53 pages
English and French language
sale 15% off

25-Jul-2017
01
31.020
31.240
TC 40