iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

ISO/IEC TR 14763-2:2000

(Main)

Information technology - Implementation and operation of customer premises cabling - Part 2: Planning and installation

Information technology - Implementation and operation of customer premises cabling - Part 2: Planning and installation

This Technical Report is one of two prepared in support of international standard ISO/IEC 11801 (Information technology--Generic Cabling for Customer Premises), and highlights issues relevant to planning and installing generic cabling which has been designed in accordance with ISO/IEC 11801. Administration procedures relevant to generic cabling within customer premises are detailed in ISO/IEC 14763-1. The test procedures to be applied to the cabling, during and after installation, are detailed in ISO/IEC 14763-3 for optical fibre cabling and IEC 61935-1 for balanced copper cabling.

General Information

Status
Replaced
Publication Date
10-Jul-2000
ICS
33.040.20 - Transmission systems
Technical Committee
ISO/IEC JTC 1/SC 25 - Interconnection of information technology equipment
Current Stage
DELPUB - Deleted Publication
Completion Date
23-Feb-2012
Ref Project

Relations

Replaced By
ISO/IEC 14763-2:2012 - Information technology - Implementation and operation of customer premises cabling - Part 2: Planning and installation
Effective Date
05-Sep-2023
Revised
ISO/IEC 14763-2:2019 - Information technology - Implementation and operation of customer premises cabling - Part 2: Planning and installation
Effective Date
05-Sep-2023

Buy Standard

ISO/IEC TR 14763-2:2000 - Information technology - Implementation and operation of customer premises cabling - Part 2: Planning and installation Released:7/11/2000 Isbn:2831853419ISO/IEC TR 14763-2:2000 - Information technology - Implementation and operation of customer premises cabling - Part 2: Planning and installation Released:7/11/2000 Isbn:2831853419
PreviousNext
Technical report
ISO/IEC TR 14763-2:2000 - Information technology - Implementation and operation of customer premises cabling - Part 2: Planning and installation Released:7/11/2000 Isbn:2831853419
English language
20 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


TECHNICAL
ISO/IEC
REPORT
TR 14763-2
First edition
2000-07
Information technology –
Implementation and operation of customer
premises cabling –
Part 2:
Planning and installation
Reference number
TECHNICAL
ISO/IEC
REPORT
TR 14763-2
First edition
2000-07
Information technology –
Implementation and operation
of customer premises cabling –
Part 2:
Planning and installation
 ISO/IEC 2000
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any
means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher.
ISO/IEC Copyright Office Case postale 56 CH-1211 Genève 20 Switzerland
• • •
PRICE CODE
M
For price, see current catalogue

– ii – TR 14763-2 © ISO/IEC:2000(E)
CONTENTS
Page
FOREWORD .iv
INTRODUCTION .v
Clause
1 Scope . 1
2 Reference documents . 1
3 Definitions and abbreviations. 1
3.1 Definitions. 1
3.2 Abbreviations . 2
4 Safety . 3
5 Planning. 3
5.1 General. 3
5.2 Distributors, Transition Points and Telecommunications Outlets . 3
5.3 Pathways and pathway systems . 6
5.4 Earthing and bonding . 8
6 Installation specification . 8
6.1 General. 8
6.2 Operational requirements . 8
6.3 Technical specification . 8
6.4 Scope of work . 9
6.5 Contract terms and conditions . 9
6.6 Changes and variations. 9
7 Quality plan. 10
7.1 General. 10
7.2 Cabling component acceptance tests . 10
7.3 Pre-installation cabling acceptance (Stage 1) tests . 11
7.4 Post-installation cabling acceptance (Stage 2) tests . 11
7.5 Test equipment . 11
7.6 Documentation. 11
8 Cable and closure selection. 12
8.1 General. 12
8.2 Operating environment . 12
8.3 Installation environment . 13

TR 14763-2 © ISO/IEC:2000(E) – iii –
Clause Page
9 Installation practices . 13
9.1 General. 13
9.2 Pre-installation procedures. 13
9.3 Pathways . 14
9.4 Pathway systems . 14
9.5 Component acceptance and storage. 15
9.6 Cable installation. 15
9.7 Protection of installed cables. 16
9.8 Installation of closures . 16
9.9 Pre-installation cabling acceptance (Stage 1) tests . 16
9.10 Termination, jointing and installation of cable within closures. 16
9.11 Administration . 16
9.12 Post-installation cabling acceptance (Stage 2) inspection and tests . 17
9.13 Further work . 17
10 Documentation. 17
10.1 Installation documentation. 17
10.2 Cabling documentation. 17
Annex A Centralised optical fibre cabling . 18
A.1 Introduction. 18
A.2 General guidelines . 18
A.3 Connecting hardware requirements . 20

– iv – TR 14763-2 © ISO/IEC:2000(E)
INFORMATION TECHNOLOGY –
IMPLEMENTATION AND OPERATION OF CUSTOMER
PREMISES CABLING –
Part 2: Planning and installation
FOREWORD
1) ISO (International Organization for Standardization) and IEC (International Electrotechnical Commission) form
the specialized system for worldwide standardization. National bodies that are members of ISO or IEC
participate in the development of International Standards through technical committees established by the
respective organization to deal with particular fields of technical activity. ISO and IEC technical committees
collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental,
in liaison with ISO and IEC, also take part in the work.
2) In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.
Draft International Standards adopted by the joint technical committee are circulated to national bodies for
voting. Publication as an International Standard requires approval by at least 75 % of the national bodies
casting a vote.
3) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject
of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.
The main task of IEC and ISO technical committees is to prepare International Standards.
In exceptional circumstances, a technical committee may propose the publication of a technical
report of one of the following types:
• type 1, when the required support cannot be obtained for the publication of an International
Standard, despite repeated efforts;
• type 2, when the subject is still under technical development or where, for any other
reason, there is the future but not immediate possibility of an agreement on an International
Standard;
• type 3, when the technical committee has collected data of a different kind from that which
is normally published as an International Standard, for example ‘state of the art’.
Technical reports of types 1 and 2 are subject to review within three years of publication to
decide whether they can be transformed into International Standards. Technical reports of type
3 do not necessarily have to be reviewed until the data they provide are considered to be no
longer valid or useful.
ISO/IEC 14763-2, which is a technical report of type 3, was prepared by subcommittee 25:
Interconnection of information technology equipment, of ISO/IEC joint technical committee 1:
Information technology.
This document is not to be regarded as an International Standard. Comments on the content of
this document should be sent to the IEC Central Office.

TR 14763-2 © ISO/IEC:2000(E) – v –
INTRODUCTION
This Technical Report is one of two prepared in support of international standard ISO/IEC 11801.
The diagram below shows the inter-relationship of the currently developed Technical Reports
and other supporting standards.
ISO/IEC TR 14763-2
ISO/IEC 14763-1
ISO/IEC 11801
Technical Report Type 3 International Standard
International Standard
Information technology - Information technology -
Information technology -
Implementation and operation of Implementation and operation of
Generic cabling for
customer premises cabling customer premises cabling
customer premises
Part 2: Planning and installation Part 1: Administration
ISO/IEC TR 14763-3
IEC 61935
International Standard Technical Report Type 3
Information technology -
Generic specification for the
Implementation and operation of
testing of elements of generic cabling
customer premises cabling
in accordance with ISO/IEC 11801
Part 3: Testing of optical fibre cabling
Part 1: Test methods
Figure 1 – Document relationships
This document forms Part 2 of ISO/IEC 14763 (Technical Report, type 3) and highlights issues
relevant to planning and installing generic cabling which has been designed in accordance with
ISO/IEC 11801.
Administration procedures relevant to generic cabling within customer premises are detailed in
ISO/IEC 14763-1.
The test procedures to be applied to the cabling, during and after installation, are detailed in
ISO/IEC 14763-3 for optical fibre cabling and IEC 61935-1 for balanced copper cabling.
Users of this document should be familiar with ISO/IEC 11801.
Additional information regarding the use of centralised optical fibre cabling is included in annex A.

TR 14763-2 © ISO/IEC:2000(E) – 1 –
INFORMATION TECHNOLOGY –
Implementation and operation of customer premises cabling –
Part 2: Planning and installation
1 Scope
This Technical Report specifies requirements and provides general considerations for the
planning, specification, quality assurance and installation of new cabling in accordance with
ISO/IEC 11801.
2 Reference documents
This document contains dated or undated references to specifications from other publications.
These references are quoted at the relevant points in the text and the publications are listed
below. In the case of dated references, subsequent changes or revisions to these publications
belong to this standard only if they have been incorporated by change or revision. In the case
of undated references, the latest edition of the relevant publications is applicable in each case.
IEC 60793 (all parts), Optical fibres
IEC 60794 (all parts), Optical fibre cables
IEC 61156 (all parts), Multicore and symmetrical pair/quad cables for digital communications
IEC 61935-1,— Generic cabling systems – Specification for the testing of balanced com-
1)
munication cabling in accordance with ISO/IEC 11801 – Part 1: Installed cabling
ISO/IEC 11801, Information technology – Generic Cabling for Customer Premises
ISO/IEC 14763-1, Information technology – Implementation and Operation of Customer
Premises Cabling – Part 1: Administration
ISO/IEC TR 14763-3, Information technology – Implementation and Operation of Customer
Premises Cabling – Part 3: Testing of optical fibre cabling
3 Definitions and abbreviations
3.1 Definitions
For the purposes of this part of ISO/IEC 14763 the following definitions apply in addition to
those of ISO/IEC 11801 and ISO/IEC 14763-1.
3.1.1
balun
a device for transforming an unbalanced voltage to a balanced voltage or vice-versa
3.1.2
bonding
the process of connecting the earthing conductors/contacts on cabling, pathway systems or
components to an identified earthing point within the premises as specified in national or local
regulations
________
1)
To be published.
– 2 – TR 14763-2 © ISO/IEC:2000(E)
NOTE Equipotential bonding is defined as “provision of electric connections between conductive parts, intended to
achieve equipotentiality“.
3.1.3
cabinet
an enclosed construction intended for housing telecommunication components and equipment
3.1.4
civil works
activities required to prepare pathways and pathway systems, particularly external to buildings,
prior to the installation of cabling
3.1.5
closure
fixture or fitting of either open or closed construction intended to contain connecting hardware
3.1.6
frame
an open construction intended for mounting telecommunications components and equipment
3.1.7
impedance matching device
a device designed to match the impedance of transmission equipment to that of the installed
cabling
3.1.8
minimum dynamic ben
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC 60728-101-2:2023(Main)
Cable networks for television signals, sound signals and interactive services - Part 101-2: Performance requirements for signals delivered at the system outlet in operation with all-digital channels load

IEC 60728-101-2:2023 provides the minimum performance requirements to be fulfilled in operation at the system outlet or terminal input and describes the summation criteria for the impairments present in the received signals and those produced by the CATV/MATV/SMATV cable network, including individual receiving systems.
In a building divided into apartment blocks, the signals received by the antennas are distributed by the MATV/SMATV cable network up to the home network interface (HNI); the television signals are then distributed (inside the home) by home networks (HN) of various types up to the system outlet or terminal input. The cable network can support two-way operation, from the system outlet (or terminal input) towards the headend.
The home network can use coaxial cables, balanced pair cables, fibre optic cables (glass or plastic) and also wireless links inside a room (or a small number of adjacent rooms) to replace wired cords.
This part of IEC 60728 is limited to downstream TV broadcast signals received from antennas and is applicable to cable networks intended for television signals, sound signals and interactive services operating between about 5 MHz and 3 300 MHz. The frequency range is extended to 6 000 MHz for home distribution techniques that replace wired cords with a wireless two-way communication inside a room (or a small number of adjacent rooms) that uses the 5 GHz to 6 GHz frequency band.
The main sections of a general CATV/MATV/SMATV system, indicating the parts of the IEC 60728-101 series documents where the relevant performance requirements are indicated.
- The requirements for the signals received at the headend are given in IEC 60728-101:2016, Clause 6.
- The requirements for the CATV/MATV/SMATV cable network, assuming an unimpaired input signal at the input of the headend, up to the system outlet are given in IEC 60728‑101:2016, Clause 5.
- The requirements for the CATV/MATV/SMATV cable network up to the home network interface (HNI) are given in IEC 60728-101:2016, Clause 7, assuming an unimpaired input signal at the input of the headend.
- The specific requirements from HNI to the system outlet or terminal input are given in IEC 60728-101-1:2023, Clause 5, assuming an unimpaired input signal at the HNI.
- The requirements at the system outlet in operation are given in Clause 6 of this document.
The expression "in operation" means that the received signals, with their impairments, are applied to the headend input of the CATV/MATV/SMATV cable network. The requirements at the system outlet "in operation" are derived, therefore, by summing the impairments of the various cascaded parts of the system and of the input signal.
When a change of signal format from digital to digital (e.g. from QPSK to QAM) (e.g. as in ETSI EN 300 473) or from digital to analogue (e.g. from DVB-S/S2 to AM-VSB or DVB-T/T2 to AM-VSB) is made at the headend, the summation of the impairments that produce a relaxation of requirements at system outlet does not apply. Such a case will be the equivalence of unimpaired signals applied at the headend input. Therefore, the requirements at system outlet given in IEC 60728‑1 apply.
This document also provides references for the basic methods of measurement of the operational characteristics of the downstream cable network in order to assess its performance.
All requirements refer to the performance limits to be achieved in operation at any system outlet when terminated in a resistance equal to the nominal load impedance of the system, unless otherwise specified. Where system outlets are not used, the above applies to the terminal input.
The present document also provides limits for the accumulation of degradations if the home network is subdivided into a number of parts, using different transmission media (e.g. coaxial cabling, balanced cabling, optical cabling, wireless links).
This International Standard is to be used in conjunction with IEC 60728-101:2016.

  • Standard
    60 pages
    English and French language
    sale 15% off
IEC
IEC 60728-101-1:2023(Main)
Cable networks for television signals, sound signals and interactive services - Part 101-1: RF cabling for two-way home networks with all-digital channels load

IEC 60728-101-1:2023 provides the requirements and describes the implementation guidelines of RF cabling for two-way home networks; it is applicable to any home network that distributes signals provided by CATV/MATV/SMATV cable networks (including individual receiving systems) having a coaxial cable output. It is also applicable to home networks where some part of the distribution network uses wireless links, for example in place of the receiver cord.
This part of IEC 60728 is therefore applicable to RF cabling for two-way home networks with wired cords or wireless links inside a room and primarily intended for television and sound signals operating between about 5 MHz and 3 300 MHz. The frequency range is extended to 6 000 MHz for distribution techniques that replace wired cords with a wireless two-way communication inside a room (or a small number of adjacent rooms) that uses the 5 GHz to 6 GHz band.
In a building divided into apartment blocks, the distribution of the signals inside the home starts from the home network interface (HNI) up to the system outlet or terminal input. The requirements at the system outlet are given in IEC 60728-101:2016, Clause 5 and the requirements at the HNI are given in IEC 60728-101:2016, Clause 7. In Clause 5 of this document, additional requirements are given.
This document deals with various possibilities to distribute signals in a home network, using coaxial cables, balanced pair cables, fibre optic cables (glass or plastic) and also wireless links inside a room (or a small number of adjacent rooms) to replace wired cords.
This document gives references to basic methods of measurement of the operational characteristics of the home cable network in order to assess its performance.
All requirements refer to the performance limits, which are obtained between the input(s) at the home network interface (HNI) and the output at any system outlet when terminated in a resistance equal to the nominal load impedance of the system, unless otherwise specified. Where system outlets are not used, the above applies to the terminal input.
The present document also provides limits for the accumulation of degradations if the home network is subdivided into a number of parts, using different transmission media (e.g. coaxial cabling, balanced cabling, optical cabling, wireless links).
Clause 5 defines the performance limits measured at system outlet or terminal input for an unimpaired (ideal) test signal applied at the HNI. Under normal operating conditions for any digital channel and meeting these limits, the cumulative effect of the impairment of any single parameter at the HNI and that due to the home network produces signals not worse than the requirements given in IEC 60728-101-2. For digitally modulated signals, the quality requirement is a QEF (quasi error-free) reception.
This document describes the physical layer connection for home networks. Description of protocols required for layer 2 and higher layers is out of the scope of this document. Logical connections between devices within the home network are therefore not always guaranteed.
This International Standard is to be used in conjunction with IEC 60728-101:2016.

  • Standard
    142 pages
    English and French language
    sale 15% off
IEC
IEC 61156-13:2023(Main)
Multicore and symmetrical pair/quad cables for digital communications - Part 13: Symmetrical single pair cables with transmission characteristics up to 20 MHz - Horizontal floor wiring - Sectional specification

IEC 61156-13:2023 describes cables intended to be used for transmission of 10 Mbit/s over a single twisted pair and distances of up to 1 km. The transmission characteristics of these cables are specified up to a frequency of 20 MHz and at a temperature of 20 °C. Depending on the MICE environment and the installation conditions, either unscreened or screened cables can be used. Furthermore, to consider different maximum transmission lengths, two sets of requirements are specified. The cable type A-1000 is a design supporting up to 1 km channel length while the cable type A-400 is supporting up to 400 m channel length. A blank detail specification can be found in Annex A.
The cables covered by this document are intended to operate with voltages and currents normally encountered in communication systems. While these cables are not intended to be used in conjunction with low impedance sources, for example the electric power supplies of public utility mains, they are intended to be used to support the delivery of DC low voltage remote powering applications.

  • Standard
    24 pages
    English language
    sale 15% off
IEC
IEC 61935-2:2022(Main)
Specification for the testing of balanced and coaxial information technology cabling - Part 2: Cords as specified in ISO/IEC 11801-1 and related standards

IEC 61935-2:2021 specifies test methods for balanced and coaxial cords, which are used as equipment cords, patch cords, and CP cords, within cabling systems, in accordance with ISO/IEC 11801-1. The test methods and associated requirements are provided to demonstrate performance and reliability and to ensure compatibility of these balanced and coaxial cords during their operational lifetime. This document may also be used for providing test methodology for assessing the performance of other cords.
This fourth edition cancels and replaces the third edition published in 2010. This edition includes the following significant technical changes with respect to the previous edition:
- inclusion of cords up to category 8.1 and category 8.2, as defined in ISO/IEC 11801-1.

  • Standard
    43 pages
    English language
    sale 15% off
  • Standard
    67 pages
    English and French language
    sale 15% off
IEC
IEC 62037-6:2021(Main)
Passive RF and microwave devices, intermodulation level measurement - Part 6: Measurement of passive intermodulation in antennas

IEC 62037-6:2021 is available as IEC 62037-6:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62037-6:2021 defines the test fixtures and procedures recommended for measuring levels of passive intermodulation generated by antennas, typically used in wireless communication systems. The purpose is to define qualification and acceptance test methods for antennas for use in low intermodulation (low IM) applications. This second edition cancels and replaces the first edition published in 2013. This edition includes the following significant technical changes with respect to the previous edition:
a. dynamic testing requirements updated to define impact energy and locations to apply impacts to devices under test

  • Standard
    46 pages
    English language
    sale 15% off
  • Standard
    31 pages
    English and French language
    sale 15% off
IEC
IEC 62037-5:2021(Main)
Passive RF and microwave devices, intermodulation level measurement - Part 5: Measurement of passive intermodulation in filters

IEC 62037-5:2021 is available as IEC 62037-5:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62037-5:2021 defines test fixtures and procedures recommended for measuring levels of passive intermodulation generated by filters, typically used in wireless communication systems. The purpose is to define qualification and acceptance test methods for filters for use in low intermodulation (low IM) applications. This second edition cancels and replaces the first edition published in 2013. This edition includes the following significant technical changes with respect to the previous edition:
a. dynamic testing requirements updated to define impact energy and locations to apply impacts to devices under test.

  • Standard
    38 pages
    English language
    sale 15% off
  • Standard
    25 pages
    English and French language
    sale 15% off
IEC
IEC 62037-1:2021(Main)
Passive RF and microwave devices, intermodulation level measurement - Part 1: General requirements and measuring methods

IEC 62037-1:2021 is available as IEC 62037-1:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62037-1:2021 deals with the general requirements and measuring methods for intermodulation (IM) level measurement of passive RF and microwave components, which can be caused by the presence of two or more transmitting signals. The test procedures given in this document give the general requirements and measurement methods required to characterize the level of unwanted IM signals using two transmitting signals. The IEC 62037 series addresses the measurement of PIM, but does not cover the long-term reliability of a product with reference to its performance. This second edition cancels and replaces the first edition published in 2012. This edition includes the following significant technical changes with respect to the previous edition:
a. clarification added that test equipment may utilize pulsed generators to reduce power consumption;
b. heating effect differences in the device under test noted in Annex B for tests conducted using pulsed generators;
c. guidance added in Annex B to improve probability of detection of short duration PIM events while dynamic testing.

  • Standard
    42 pages
    English language
    sale 15% off
  • Standard
    29 pages
    English and French language
    sale 15% off
IEC
IEC 62037-3:2021(Main)
Passive RF and microwave devices, intermodulation level measurement - Part 3: Measurement of passive intermodulation in coaxial connectors

IEC 62037-3:2021 is available as IEC 62037-3:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62037-3:2021 defines the impact test on coaxial connectors to evaluate their robustness against weak connections and particles inside the connector, as independently as possible from the effects of cable PIM (passive intermodulation). For other connectors (e.g. panel mounted connectors), the cable can be replaced by an adequate transmission-line (e.g. airline, stripline). In order to evaluate the effects of mechanical stresses on the connectors, a series of impacts is applied to the connectors while measuring the PIM. This second edition cancels and replaces the first edition published in 2012. This edition includes the following significant technical changes with respect to the previous edition:
a. impact method changed to utilize a steel ball rather than a brass rod;
b. impact energy required to test each connector type added;
c. method added to calculate impact energy for connector types not listed in the document.

  • Standard
    28 pages
    English language
    sale 15% off
  • Standard
    17 pages
    English and French language
    sale 15% off
IEC
IEC 62037-2:2021(Main)
Passive RF and microwave devices, intermodulation level measurement - Part 2: Measurement of passive intermodulation in coaxial cable assemblies

IEC 62037-2:2021 defines a procedure to measure levels of passive intermodulation generated by a coaxial cable assembly. This test method is applicable to jumper cables, i.e. cable assemblies intended to provide interface flexibility between rigid devices. It is also used to evaluate cable assemblies that are subjected to motion in operation.
This second edition cancels and replaces the first edition published in 2012. This edition includes the following significant technical changes with respect to the previous edition:
a. criteria for application of mechanical stress revised to be a function of advertised cable bend radius.

  • Standard
    16 pages
    English and French language
    sale 15% off
IEC
IEC 60728-101:2016(Main)
Cable networks for television signals, sound signals and interactive services - Part 101: System performance of forward paths loaded with digital channels only

IEC 60728-101:2016 is applicable to any cable network (including individual receiving systems) distributing only digital channels having in the forward path a coaxial cable output and primarily intended for television and sound signals operating between about 30 MHz and 3 000 MHz. This standard specifies the basic methods of measurement of the operational characteristics of a cable network having coaxial cable outputs in order to assess the performance of these systems and their performance limits.

  • Standard
    240 pages
    English and French language
    sale 15% off