IEC TS 61970-556:2016

Energy management system application program interface (EMS-API) - Part 556: CIM based graphic exchange format (CIM/G)

IEC TS 61970-556:2016(E) specifies a CIM-based graphic exchange format (CIM/G). It includes graphic file structure and graphic element definitions. This document supports a mechanism for off-line exchange of graphic displays and on-line remote browsing of diagrams among distinct SCADA/EMS systems that may be provided by multiple vendors and located in different places.

General Information

• Status: Published
• Publication Date: 26-Sep-2016
• ICS: 01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
• ICS: 33.200 - Telecontrol. Telemetering
• Technical Committee: TC 57 - Power systems management and associated information exchange
• Drafting Committee: WG 13 - TC 57/WG 13
• Current Stage: PPUB - Publication issued
• Start Date: 31-Jan-2017
• Completion Date: 27-Sep-2016

Standards Content (Sample)

IEC TS 61970-556 ®
Edition 1.0 2016-09
TECHNICAL
SPECIFICATION
colour
inside
Energy management system application program interface (EMS-API) –
Part 556: CIM based graphic exchange format (CIM/G)

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

IEC Central Office Tel.: [phone]
3, rue de Varembé Fax: [phone]
CH-1211 Geneva 20 [e-mail]
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing 20 000 terms and definitions in
Technical Specifications, Technical Reports and other English and French, with equivalent terms in 15 additional
documents. Available for PC, Mac OS, Android Tablets and languages. Also known as the International Electrotechnical
iPad. Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a 65 000 electrotechnical terminology entries in English and
variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of
committee,…). It also gives information on projects, replaced IEC publications issued since 2002. Some entries have been
and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and

CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: [e-mail].
IEC TS 61970-556 ®
Edition 1.0 2016-09
TECHNICAL
SPECIFICATION
colour
inside
Energy management system application program interface (EMS-API) –

Part 556: CIM based graphic exchange format (CIM/G)

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 33.200 ISBN 978-2-8322-3654-3

– 2 – IEC TS 61970-556:2016 © IEC 2016
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references. 7
3 Terms and definitions . 7
4 Relationship of this technical specification with other standards . 8
5 Use cases . 9
6 Structure of diagram file and definition file . 11
6.1 General . 11
6.2 Diagram file structure . 11
6.3 Definition files structure . 12
7 Basic shape graphic element . 13
8 Power system graphic element . 14
8.1 General . 14
8.2 User-defined power system graphic element . 14
8.3 Reference of user-defined graphic element . 15
9 Examples of some graphic elements and diagram . 17
9.1 Breaker graphic element . 17
9.2 Dynamic Text graphic element . 17
9.3 Link graphic element . 18
9.4 Bay graphic element . 18
9.5 Voltage level diagram . 19
9.6 Substation or power plant diagram . 20
9.7 Power grid graphic diagram . 20
10 Mechanism of runtime display . 21
10.1 Mechanism of runtime local display . 21
10.2 Mechanism of runtime remote browsing . 22
10.3 Menu description . 22
Annex A (informative) Definition of power system graphic element . 25
Annex B (informative) Definition of colour identification base on voltage level . 31
Annex C (informative) Default value of diagram object style . 33
Annex D (informative) An example of power plant one-line diagram . 34
Annex E (informative) Example of menu definition. 35
Bibliography . 36

Figure 1 – Relationship with other standards . 9
Figure 2 – Scenario of off-line application . 10
Figure 3 – Scenario of common MMI and online browsing . 10
Figure 4 – Structure of diagram file . 11
Figure 5 – Structure of definition file . 12
Figure 6 – Definition of power system graphic element . 15
Figure 7 – Reference of user-defined graphic element . 16
Figure 8 – Definition of Breaker element . 17

Figure 9 – Reference of Breaker element . 17
Figure 10 – Definition of Dynamic Text graphic element . 17
Figure 11 – Reference of Dynamic Text graphic element . 18
Figure 12 – Reference of Link graphic element . 18
Figure 13 – An example of Bay element definition. 19
Figure 14 – Reference of a bay element . 19
Figure 15 – Example of Voltage level diagram . 19
Figure 16 – Example of Substation diagram with voltage level . 20
Figure 17 – Example of Substation diagram without voltage level . 20
Figure 18 – Example of Power grid graphic diagram . 21
Figure 19 – Mechanism of runtime local display . 22
Figure 20 – Mechanism of runtime remote browsing . 22
Figure 21 – Menu description . 23
Figure D.1 – Example of power plant one-line diagram . 34

Table 1 – Common elements and attributes of SVG . 13
Table 2 – Common drawing attributes . 14
Table B.1 – Examples of colour value and legend . 31

– 4 – IEC TS 61970-556:2016 © IEC 2016
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ENERGY MANAGEMENT SYSTEM APPLICATION
PROGRAM INTERFACE (EMS-API) –
Part 556: CIM based graphic exchange format (CIM/G)

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in
addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses
arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
The main task of IEC technical committees is to prepare International Standards. In exceptional
circumstances, a technical committee may propose the publication of a technical specification
when
• the required support cannot be obtained for the publication of an International Standard,
despite repeated efforts, or
• the subject is still under technical development or where, for any other reason, there is the
future but no immediate possibility of an agreement on an International Standard.
Technical specifications are subject to review within three years of publication to decide whether
...