IEC 62026-3:2014/COR1:2015 - Corrigendum 1 - Low-voltage switchgear and controlgear -

Corrigendum 1 - Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet

Corrigendum 1 - Appareillage à basse tension - Interfaces appareil de commande-appareil (CDI) - Partie 3: DeviceNet

General Information

Status

Published

Publication Date

04-Mar-2015

ICS

29.130.20 - Low voltage switchgear and controlgear

Technical Committee

SC 121A - Low-voltage switchgear and controlgear

Current Stage

PPUB - Publication issued

Start Date

16-Mar-2015

Completion Date

05-Mar-2015

Ref Project

Relations

Corrects

IEC 62026-3:2014 - Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet

Effective Date

05-Sep-2023

Corrected By

IEC 62026-3:2014/COR2:2019 - Corrigendum 2 - Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet

Effective Date

05-Sep-2023

Buy Standard

IEC 62026-3:2014/COR1:2015 - Corrigendum 1 - Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet
Released:3/5/2015

Standard

IEC 62026-3:2014/COR1:2015 - Corrigendum 1 - Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet Released:3/5/2015

English and French language

10 pages

sale 15% off

Preview

sale 15% off

Preview

Standards Content (Sample)

IEC 62026-3:2014/COR1:2015 - C...

 IEC 2015
INTERNATIONAL ELECTROTECHNICAL COMMISSION
COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE
____________
IEC 62026-3 IEC 62026-3
Edition 3.0 2014-08 Édition 3.0 2014-08

Low-voltage switchgear and controlgear – Appareillage à basse tension – Interfaces
Controller-device interfaces (CDIs) – appareil de commande-appareil (CDI) –

Part 3: DeviceNet Partie 3: DeviceNet

CO RRI G E NDUM 1
5.2.4.4.2 Communication faulted 5.2.4.4.2 Protocoles de messages de
message protocols défaut de communication
Delete, in the second existing paragraph, Supprimer, dans le deuxième alinéa
"Error! Reference source not found.". existant, "Error! Reference source not
found.".
5.2.4.5.3 Message de réponse
"identification" – Protocole
5.2.4.5.3 Identify response message –
multidestinataire
Multicast protocol
Supprimer, dans le premier alinéa
Delete, in the first existing paragraph,
existant, "Error! Reference source not
"Error! Reference source not found.".
found.".
5.2.7 Duplicate MAC ID detection
5.2.7 Protocole de détection de
protocol
duplication d’adresse MAC ID
Replace "Error! Reference source not
La correction concerne l'anglais
found." by the following:
seulement.
IDENTIFIER BITS
MESSAGE ID MEANING
10 9 8 7 6 5 4 3 2 1 0
Group 2
1 0 MAC ID
Group 2 messages
message ID
1 0
Destination MAC ID 1 1 1
Duplicate MAC ID check message
IEC
Figure 35 – Duplicate MAC ID check CAN identifier field
IEC 62026-3:2014-08/COR1:2015-03(en-fr)

– 2 – IEC 62026-3:2014/COR1:2015
 IEC 2015
5.5.3.3.2 Request service data field 5.5.3.3.2 Paramètres du champ des
parameters données de service d’une requête
Delete, in the second existing paragraph, La correctio
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC

IEC 60947-1:2020/COR2:2024(Corrigendum)

Corrigendum 2 - Low-voltage switchgear and controlgear - Part 1: General rules

IEC 60947-1:2020 applies, when required by the relevant product standard, to low-voltage switchgear and controlgear hereinafter referred to as "equipment" or “device” and intended to be connected to circuits, the rated voltage of which does not exceed 1 000 V AC or 1 500 V DC.
This document states the general rules and common safety requirements for low-voltage switchgear and controlgear, including:
- definitions;
- characteristics;
- information supplied with the equipment;
- normal service, mounting and transport conditions, decommissioning and dismantling;
- constructional and performance requirements;
- verification of characteristics and performance;
- energy efficiency aspects (see Annex V);
- environmental aspects.
This sixth edition cancels and replaces the fifth edition published in 2007, Amendment 1:2010 and Amendment 2:2014. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
– DC values testing improvement;
– update of EMC tests;
– Annex B deletion;
– update of requirements for environmental tests (Table Q.1);
– improvement of Annex R (new examples);
– deletion of digital input Type 2, and introduction of Type 3 in Annex S;
– example for materials declaration (Annex W);
– new Annex X (co-ordination between short-circuit protective devices associated in the same circuit) created.
The contents of the corrigendum of December 2022 have been included in this copy.

Standard
3 pages
English and French language
sale 15% off

28-Apr-2024
29.130.20
SC 121A

IEC

IEC 60947-5-7:2024(Main)

Low-voltage switchgear and controlgear - Part 5-7: Control circuit devices and switching elements - Proximity devices with analog output

IEC 60947-5-7:2024 states the requirements for proximity devices that correspond to the scope of IEC 60947-5-2:2019 with analog output (PDAO) and/or a digital output to transmit a corresponding digital value representing the detected sensing input. These devices can provide additional parameters.
This second edition cancels and replaces the first edition published in 2003. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) New structure;
b) Update and expansion of definitions on analog output properties;
c) Expanded performance requirements on analog output;
d) Update and new normative references;
e) Update of EMC requirements;
f) Harmonization with IEC 62828 series;
g) Harmonization with IEC 62683 and IEC 61987 definitions;
h) Harmonization with IEC 61131-2 requirements;
i) Update of the Annex A (former Annex G), Example of the determination of the conformity;
j) New Annex B, Overview tests and influence quantities;
k) New Annex C, Additional requirements for proximity switches with analog output incorporating a built-in communication interface complying with IEC 61131-9;
l) New Annex D, Main characteristics for proximity devices with analog output.

Standard
96 pages
English and French language
sale 15% off

04-Apr-2024
29.130.20
SC 121A

IEC

IEC 60947-5-1:2024(Main)

Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices

IEC 60947-5-1:2024 applies to control circuit devices and switching elements intended for controlling, signalling, interlocking, etc., of switchgear and controlgear.
It applies to control circuit devices having a rated voltage not exceeding 1 000 V AC (at a frequency not exceeding 1 000 Hz) or 600 V DC.
This fifth edition cancels and replaces the fourth edition published in 2016. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) update of the scope structure and exclusions;
b) requirements for control circuits;
c) update of the normal service conditions (e.g. shock and vibration);
d) update of information and marking requirements including environmental information requirements referencing IEC TS 63058:2021;
e) update of the constructional requirements and the corresponding tests considering safety aspects (e.g. artificial optical radiation, security aspects, limited energy source, stored charge energy circuit);
f) update of the EMC requirements according to the generic documents;
g) new requirements for reed contact magnetic switches in Annex D;
h) requirements for class II circuit devices achieved by double or reinforced insulation in Annex F;
i) update of pull-out tests in Annex G;
j) information requirements for audible signalling device in Annex J;
k) insertion of new Annex O.

Standard
263 pages
English and French language
sale 15% off

IEC

IEC 60947-4-1:2023(Main)

Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters

IEC 60947-4-1:2023 is applicable to the following equipment:
- electromechanical contactors and starters including motor protective switching devices (MPSD and IMPSD);
- actuators of contactor relays;
- contacts dedicated exclusively to the coil circuit of the contactor or the contactor relay;
- dedicated accessories (e.g. dedicated wiring, dedicated latch accessory);
intended to be connected to distribution circuits, motors circuits and other load circuits, the rated voltage of which does not exceed 1 000 V AC or 1 500 V DC.
This fifth edition cancels and replaces the fourth edition published in 2018. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) objective in the scope;
b) instantaneous only motor protective switching device IMPSD (3.5.33);
c) kinds of equipment (5.2.1);
d) methods of overload protection of motors (5.2.6);
e) adoption of the AC-7d from IEC 61095:2023 (in 5.4.2);
f) separately mounted overload relay of a starter (in 5.7.3 b));
g) starter and contactor suitable for use downstream to basic drive module (6.1.2 w));
h) reference to IEC TS 63058 for environmental aspects (in 6.4);
i) wiring subject to movement (in 8.1.3);
j) use of voltage transient limiting device (8.1.18);
k) accessible parts subject to temperature limits (in 8.2.2.3);
l) reference to Annex X of IEC 60947-1:2020 for the co-ordination of MPSD with SCPD (8.2.5.4);
m) reference to IEC TR 63216 with different EMC environments (8.3.1);
n) reference to IEC TR 63201 for the embedded software design (8.4);
o) reference to IEC TS 63208 for cybersecurity aspects (8.5);
p) update and completion of the measurement method of the power consumption of the electromagnet (9.3.3.2.1.2);
q) update of Annex C including rational about AC-3e;
r) determination of the critical load current for photovoltaic applications (M.8.7).

Standard
385 pages
English and French language
sale 15% off

IEC

IEC 62626-1:2023(Main)

Low-voltage switchgear and controlgear enclosed equipment - Part 1: Additional requirements for enclosed switch-disconnectors in accordance with IEC 60947-3 - Isolation of electrical equipment during repair and maintenance work in specific applications

IEC 62626-1:2023 is available as IEC 62626-1:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62626-1:2023 applies to enclosed switches-disconnectors with rated voltages up to 1 000 V AC for repair and maintenance work or cleaning work in load circuits. Devices within the scope of this document are switch-disconnectors in accordance with IEC 60947-3 with specific additional requirements. Enclosed switch-disconnectors in this document are suitable for isolation in accordance with the IEC 60947 series and are not equipped with means for remote control or automatic switching to avoid unexpected or accidental start. These devices are not used for operational switching, for example quick start and stop, jogging. This second edition cancels and replaces the first edition published in 2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) update of this document based on IEC 60947-1:2020.

Standard
33 pages
English language
sale 15% off
Standard
21 pages
English and French language
sale 15% off

IEC

IEC 61095:2023(Main)

Electromechanical contactors for household and similar purposes

IEC 61095:2023 is available as IEC 61095:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61095:2023 applies to electromechanical air break contactors for household and similar purposes provided with main contacts intended to be connected to circuits the rated voltage of which does not exceed 440 V AC (between phases) with rated operational currents less than or equal to 63 A for utilization category AC-7a, and 32 A for utilization categories AC‑7b, AC‑7c and AC-7d (expressed in rated power), and rated conditional short-circuit current less than or equal to 6 kA. This third edition cancels and replaces the second edition published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) addition of requirements for screwless terminals;
b) addition of requirements for the switching of LED lamps. Contactors for domestic and similar applications can be used for controlling lighting loads which is increasingly using LED lamp technology. A specific category for contactors is created: AC-7d. Requirements and tests are added to cover this market development, mainly for making and breaking and conventional operational performance;
c) addition of requirements for contactors with electronically controlled electromagnet. Household contactors with electronically controlled electromagnet are available for years on the market. To fully cover such device, requirements and tests are added, dealing mainly with operating limits, behaviour in abnormal conditions, breakdown of components, EMC tests, etc.
d) embedded software. More and more contactors are incorporating electronic circuits with embedded software. A reference is provided to guide the design of the software.

Standard
435 pages
English language
sale 15% off
Standard
284 pages
English and French language
sale 15% off

IEC

IEC TR 63434:2023(Main)

Low voltage switchgear and controlgear - Partial discharge voltages and PD-level in low voltage switchgear and controlgear

IEC TR 63434:2023 is intended to provide awareness about partial discharge phenomena. This document gives guidance for some conditions when partial discharge can occur in low voltage switchgear and controlgear connected to networks of up to 1 000 V AC. Internal operational voltages can exceed these values. This document gives guidance on the design of conductors and dimensioning of insulation exposed to electrical fields.
This document explains the partial discharge phenomena considering electrical field stress, type of insulation material and other construction parameters, such as the voltage, frequency, temperature, humidity and the distances within the device.