Abstract

This document establishes a system of tolerance limits utilizing tolerance classes for linear and angular sizes. This document is applicable to general size specifications for features with a nominal linear size from 0,5 mm up to and including 4 000 mm, and to features with any nominal angular size. The given tolerance limits are intended to be used with the default specification operators from the ISO GPS system. NOTE 1 See ISO 14405-1 and ISO 14405-3 for further information regarding sizes including default specification operators. This document does not apply to other types of dimensional specifications, such as linear and angular distances etc. NOTE 2 See ISO 14405-2 for further information regarding distances and other types of dimensions. This document is applicable on its own, in conjunction with ISO 22081 or any other document for general specifications as long as the interactions are unambiguously described. NOTE 3 See ISO 8015 for information about the responsibility principle, the general specification principle, etc.

Status
Published
Publication Date
08-Nov-2026
Current Stage
6060 - International Standard published
Start Date
09-Nov-2026
Completion Date
09-Nov-2026

Buy Documents

Standard

ISO 2768:2026 - Geometrical product specifications (GPS) — Dimensional tolerancing — Tolerance limits for general specification of linear and angular sizes

Release Date:09-Nov-2026
English language (10 pages)
sale 15% off
Preview
sale 15% off
Preview
Standard

ISO 2768:2026 - Spécification géométrique des produits (GPS) — Tolérancement dimensionnel — Limites de tolérance pour la spécification générale des tailles linéaires et angulaires

Release Date:09-Nov-2026
French language (10 pages)
sale 15% off
Preview
sale 15% off
Preview

ISO 2768:2026 is an International Standard from ISO for geometrical product specifications. It specifies general tolerance limits for linear and angular sizes using four tolerance classes, for nominal linear sizes from 0.5 mm up to and including 4 000 mm and for any nominal angular size. It is written for people preparing or checking technical product documentation, including design, quality, manufacturing and purchasing teams.

What does ISO 2768:2026 specify?

ISO 2768:2026 sets up a tolerance system for general size specifications in the ISO GPS system. It focuses on linear sizes and angular sizes, and it organizes the subject through clauses on scope, normative references, terms and definitions, general rules, and tolerance limits.

The document is structured as follows:

AnnexWhat it covers
Annex AExample of using ISO 2768 with ISO 22081
Annex BFormer practices that were removed from earlier use
Annex CRelationship to the ISO GPS matrix model

Clause 5 is the core of the document. It contains separate rules and tables for linear sizes and angular sizes, together with the way angular size selection is based on nominal integral line length.

What are the key requirements of ISO 2768:2026?

ISO 2768:2026 applies only to explicit nominal linear and angular size specifications that do not already carry an individual tolerance indication. In practice, this means the standard is meant for general tolerancing on drawings or in product definition data, not for every dimension on a part.

How the standard is applied

The tolerance limits in ISO 2768:2026 may be used on their own, or together with ISO 22081, or with another document for general specifications when the interaction is made clear. That matters because users need an unambiguous rule set across all general tolerances in the technical product documentation.

When ISO 2768:2026 is applied, the indication shall identify the document and the selected tolerance class. The standard gives four classes - f, m, c and v - so the user must choose the class that matches the intended general tolerance level.

Linear sizes

For linear sizes, Clause 5.1 requires selection of the tolerance limits according to the nominal linear size and the chosen class. In practice, the engineer or drafter looks up the relevant size band in Table 1 and applies the matching general limit to the feature.

Angular sizes

For angular sizes, Clause 5.2 bases selection on the nominal integral line length, not on the angle alone. The document explains how to determine that length for cones, frustums and wedges, which matters because the angular tolerance depends on the geometry used to represent the feature.

What the limits do and do not cover

The limits in this document are not linked to functional requirements by themselves. That means a user should not assume the table value is automatically the best functional tolerance for the product.

ISO 2768:2026 does not apply to other dimensional specifications such as distances, theoretical exact dimensions (TED), or auxiliary dimensions. For practical use, this keeps the standard limited to general size tolerancing and avoids mixing it with other dimensioning concepts.

Rules that support conformity checking

The document is part of the ISO GPS system, so ISO 8015 applies, and the default decision rules from ISO 14253-1 apply unless otherwise indicated. In practice, this matters when a company is deciding how to interpret a general tolerance during verification or conformity assessment.

What terms does ISO 2768:2026 define?

ISO 2768:2026 uses terms from ISO 8015, ISO 14405-1, ISO 14405-2, ISO 14405-3 and ISO 22081.

  • Geometrical product specifications (GPS) - the ISO system for specifying and verifying geometry on products.
  • Tolerance class - one of the four general tolerance levels used in this document: f, m, c or v.
  • Default specification operator - the standard way a size is specified in the ISO GPS system unless altered by the rules of the referenced standards.
  • Nominal integral line length - the length used to select an angular tolerance, derived from the geometry of the feature.
  • Technical product documentation (TPD) - the official product definition record where the general tolerance indication may appear.
  • Theoretical exact dimension (TED) - a dimension that ISO 2768:2026 excludes from its general size tolerance rules.

Who uses ISO 2768:2026?

ISO 2768:2026 is used by designers, draughtspersons, manufacturing engineers, quality managers, inspectors and buyers who work with technical product documentation. It is relevant where a company wants a common general tolerance rule for parts made by different materials or manufacturing methods.

It is also used in supplier-customer communication when a drawing or product definition dataset needs a general size tolerance scheme that can be applied consistently during design, production and verification.

What changed in ISO 2768:2026 from the previous edition?

ISO 2768:2026 is the second edition and it cancels and replaces ISO 2768-1:1989. The stated changes are the deletion of Clause 6, a revised scope limited to linear and angular sizes, removal of tolerance limits for broken edges, and an extended field of application to parts independent of material and manufacturing method.

Which standards are used with ISO 2768:2026?

ISO 2768:2026 cites ISO 8015, ISO 14405-1, ISO 14405-2, ISO 14405-3 and ISO 22081 as normative references.

  • ISO 8015 - provides the fundamental concepts, principles and rules of GPS.
  • ISO 14405-1 - covers linear sizes and the default specification operator for size.
  • ISO 14405-2 - covers dimensions other than linear or angular sizes.
  • ISO 14405-3 - covers angular sizes and the default specification operator for angular size.
  • ISO 22081 - covers general geometrical specifications and general size specifications, and gives the framework used with ISO 2768:2026.
  • ISO 14253-1 - supplies the default decision rules for verifying conformity or nonconformity.
  • ISO 14638 - provides the GPS matrix model that places this document in the ISO GPS system.

What does the ISO 2768:2026 document contain?

ISO 2768:2026 contains two tolerance tables, one for linear sizes and one for angular sizes. It also includes figures that explain how to determine the nominal integral line length for angular sizing of cones, frustums and wedges.

Annex A gives an example of using the standard together with ISO 22081, which is useful for drawing indication. Annex B summarizes former practices that were removed, and Annex C explains the document’s position in the ISO GPS matrix model and how it relates to other GPS standards.

Relations

Effective Date
12-Feb-2026
Effective Date
08-Oct-2022

Buy Documents

Standard

ISO 2768:2026 - Geometrical product specifications (GPS) — Dimensional tolerancing — Tolerance limits for general specification of linear and angular sizes

Release Date:09-Nov-2026
English language (10 pages)
sale 15% off
Preview
sale 15% off
Preview
Standard

ISO 2768:2026 - Spécification géométrique des produits (GPS) — Tolérancement dimensionnel — Limites de tolérance pour la spécification générale des tailles linéaires et angulaires

Release Date:09-Nov-2026
French language (10 pages)
sale 15% off
Preview
sale 15% off
Preview

Get Certified

Connect with accredited certification bodies for this standard

BSMI (Bureau of Standards, Metrology and Inspection)

Taiwan's standards and inspection authority.

TAF Taiwan Verified

Sponsored listings

Frequently Asked Questions

ISO 2768:2026 is a standard published by the International Organization for Standardization (ISO). Its full title is "Geometrical product specifications (GPS) — Dimensional tolerancing — Tolerance limits for general specification of linear and angular sizes". This standard covers: This document establishes a system of tolerance limits utilizing tolerance classes for linear and angular sizes. This document is applicable to general size specifications for features with a nominal linear size from 0,5 mm up to and including 4 000 mm, and to features with any nominal angular size. The given tolerance limits are intended to be used with the default specification operators from the ISO GPS system. NOTE 1 See ISO 14405-1 and ISO 14405-3 for further information regarding sizes including default specification operators. This document does not apply to other types of dimensional specifications, such as linear and angular distances etc. NOTE 2 See ISO 14405-2 for further information regarding distances and other types of dimensions. This document is applicable on its own, in conjunction with ISO 22081 or any other document for general specifications as long as the interactions are unambiguously described. NOTE 3 See ISO 8015 for information about the responsibility principle, the general specification principle, etc.

This document establishes a system of tolerance limits utilizing tolerance classes for linear and angular sizes. This document is applicable to general size specifications for features with a nominal linear size from 0,5 mm up to and including 4 000 mm, and to features with any nominal angular size. The given tolerance limits are intended to be used with the default specification operators from the ISO GPS system. NOTE 1 See ISO 14405-1 and ISO 14405-3 for further information regarding sizes including default specification operators. This document does not apply to other types of dimensional specifications, such as linear and angular distances etc. NOTE 2 See ISO 14405-2 for further information regarding distances and other types of dimensions. This document is applicable on its own, in conjunction with ISO 22081 or any other document for general specifications as long as the interactions are unambiguously described. NOTE 3 See ISO 8015 for information about the responsibility principle, the general specification principle, etc.

ISO 2768:2026 is classified under the following ICS (International Classification for Standards) categories: 17.040.40 - Geometrical Product Specification (GPS). The ICS classification helps identify the subject area and facilitates finding related standards.

ISO 2768:2026 has the following relationships with other standards: It is inter standard links to FprEN ISO 2768, ISO 2768-1:1989. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

ISO 2768:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


International
Standard
ISO 2768
Second edition
Geometrical product specifications
2026-11
(GPS) — Dimensional tolerancing
— Tolerance limits for general
specification of linear and angular
sizes
Spécification géométrique des produits (GPS) — Tolérancement
dimensionnel — Limites de tolérance pour la spécification
générale des tailles linéaires et angulaires
Reference number
© ISO 2026
All rights reserved.
This ISO publication is protected by copyright and is owned by ISO and/or its licensors.
The content of this ISO publication is provided under licence, not sold. Use is subject to the applicable licence terms issued by ISO,
an ISO member body, or an authorized third-party distributor.
Except as required for implementation or expressly permitted by a separate licence, no part of this ISO publication may be
reproduced, distributed, modified, used, or made available in any form or by any means – electronic or mechanical, including
photocopying, scanning, recording, or posting on internal or external digital platforms.
Any use beyond the scope of the granted rights is prohibited and may result in legal action.
ISO copyright office
CP 401 • CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 General . 2
5 Tolerance limits . 2
5.1 Linear sizes .2
5.1.1 Tolerance limits selection for linear sizes.2
5.1.2 Tolerance limits for linear sizes .3
5.2 Angular sizes .3
5.2.1 Tolerance limits selection for angular sizes .3
5.2.2 Tolerance limits for angular sizes .5
Annex A (informative) Example of the use of this document in conjunction with ISO 22081. 7
Annex B (informative) Former practices . 8
Annex C (informative) Relationship to the ISO GPS matrix model . 9
Bibliography .10

iii
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 213, Dimensional and geometrical product
specifications and verification, in collaboration with the European Committee for Standardization (CEN) in
accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
This second edition cancels and replaces the first edition (ISO 2768-1:1989), which has been technically
revised.
The main changes are as follows:
— deletion of Clause 6;
— revision of the scope to limit it to linear and angular sizes to align with the ISO 14405 series;
— removal of tolerance limits for broken edges (external radii and chamfer heights);
— extension of the field of application to parts independent of material and manufacturing method.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.

iv
Introduction
This document is a geometrical product specification (GPS) standard and is to be regarded as a
complementary ISO GPS standard (see ISO 14638). It influences chain link A of the chains of standards on
size.
The ISO GPS matrix model given in ISO 14638 gives an overview of the ISO GPS system of which this
document is a part. The fundamental rules of ISO GPS given in ISO 8015 apply to this document and the
default decision rules given in ISO 14253-1 apply to specifications made in accordance with this document,
unless otherwise indicated.
For more detailed information of the relationship of this document to other standards and the ISO GPS
matrix model, see Annex C, Table C.1.
This document contains tables of tolerance limits for linear sizes and angular sizes.
ISO 2768:1973 was a general tolerance standard for parts produced by metal removal processes.
ISO 2768-1:1989 updated the tolerances and extended the tables covering a wider range of nominal sizes,
and introduced tolerances for broken edges (external radii and chamfer heights). It also changed the field of
application by adding parts formed from sheet metal. Significant changes have occurred in industry since
these standards were released, for example, machine performance, process capability, metrology or process
planning. The tolerance limits contained in this document have not been updated. Therefore, this document
is no longer representative of the current state of the art in industry.
However, ISO 2768-1:1989 is still heavily used and its usage is still widespread in industry. ISO 2768-1:1989
is sometimes even used for parts made of non-metallic materials or manufactured with process other than
machining. However, those materials and manufacturing process were not part of the assumptions made for
the determination of the values contained herein.
This document intends to continue to provide the users a set of values that are still considered a useful source
of information by many companies around the world while removing the main source of ambiguities that
was present in ISO 2768-1:1989. This document, used in conjunction with ISO 22081, minimizes ambiguities
and misinterpretation and respects legacy constraints by using the same values that were used in the past
for the general specification of linear and angular sizes.
The user is reminded that the selection of tolerance limits derived from a functional analysis often allows
for an optimized product. This is in contrast with selecting values from the tables in this document that are
not correlated to functional needs. For further information, see the fundamental assumptions and principles
stated in ISO 8015.
v
International Standard ISO 2768:2026(en)
Geometrical product specifications (GPS) — Dimensional
tolerancing — Tolerance limits for general specification of
linear and angular sizes
1 Scope
This document establishes a system of tolerance limits utilizing tolerance classes for linear and angular
sizes.
This document is applicable to general size specifications for features with a nominal linear size from
0,5 mm up to and including 4 000 mm, and to features with any nominal angular size. The given tolerance
limits are intended to be used with the default specification operators from the ISO GPS system.
NOTE 1 See ISO 14405-1 and ISO 14405-3 for further information regarding sizes including default specification
operators.
This document does not apply to other types of dimensional specifications, such as linear and angular
distances etc.
NOTE 2 See ISO 14405-2 for further information regarding distances and other types of dimensions.
This document is applicable on
...


Norme
internationale
ISO 2768
Deuxième édition
Spécification géométrique des
2026-11
produits (GPS) — Tolérancement
dimensionnel — Limites de
tolérance pour la spécification
générale des tailles linéaires et
angulaires
Geometrical product specifications (GPS) — Dimensional
tolerancing — Tolerance limits for general specification of linear
and angular sizes
Numéro de référence
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2026
Tous droits réservés.
La présente publication de l’ISO est protégée par le droit d’auteur et demeure la propriété de l’ISO et/ou de ses concédants de
licence.
Le contenu de la présente publication de l’ISO est fourni sous licence, et n’est pas vendu. Son utilisation est soumise aux conditions
de licence applicables définies par l’ISO, un organisme membre de l’ISO, ou un distributeur tiers agréé.
Sous réserve des besoins liés à sa mise en œuvre ou d’une autorisation expresse prévue aux termes d’une licence distincte, aucune
partie de la présente publication de l’ISO ne peut être reproduite, distribuée, modifiée, utilisée ou mise à disposition sous quelque
forme ou par quelque moyen que ce soit – électronique ou mécanique, y compris la photocopie, la numérisation, l’enregistrement
ou la publication sur des plateformes numériques internes ou externes.
Toute utilisation hors du champ d’application des droits accordés est interdite et peut donner lieu à des poursuites judiciaires.
ISO copyright office
Case postale 401 • CH-1214 Vernier, Genève
Tél.: +41 22 749 01 11
E-mail: copyright@iso.org
Web: www.iso.org
Publié en Suisse
ii
Sommaire Page
Avant-propos .iv
Introduction .v
1 Domaine d’application .1
2 Références normatives .1
3 Termes et définitions . 2
4 Généralités . 2
5 Limites de tolérance .3
5.1 Tailles lineaires .3
5.1.1 Sélection des limites de tolérance pour les tailles linéaires .3
5.1.2 Limites de tolérance pour les tailles linéaires .3
5.2 Tailles angulaires .3
5.2.1 Sélection des limites de tolérance pour les tailles angulaires .3
5.2.2 Limites de tolérance pour les tailles angulaires .5
Annexe A (informative) Exemple d’utilisation du présent document conjointement avec
l’ISO 22081 . 7
Annexe B (informative) Pratiques révolues . 8
Annexe C (informative) Relation avec le modèle de matrice ISO GPS .9
Bibliographie . 10

iii
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux
de normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général
confiée aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire
partie du comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec
la Commission électrotechnique internationale (IEC) en ce qui concerne la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier, de prendre note des différents
critères d'approbation requis pour les différents types de documents ISO. Le présent document
a été rédigé conformément aux règles de rédaction données dans les Directives ISO/IEC, Partie 2
(voir www.iso.org/directives).
L'attention est attirée sur le fait que certains des éléments du présent document peuvent faire l'objet de
droits de propriété intellectuelle ou de droits analogues. L’ISO ne prend pas position quant à la preuve, à
la validité et à l’applicabilité de tout droit de propriété revendiqué à cet égard. À la date de publication du
présent document, l’ISO n'avait pas reçu notification qu’un ou plusieurs brevets pouvaient être nécessaires
à sa mise en application. Toutefois, il y a lieu d’avertir les responsables de la mise en application du présent
document que des informations plus récentes sont susceptibles de figurer dans la base de données de
brevets, disponible à l'adresse www.iso.org/brevets. L’ISO ne saurait être tenue pour responsable de ne pas
avoir identifié de tels droits de propriété et averti de leur existence.
Les appellations commerciales éventuellement mentionnées dans le présent document sont données pour
information, par souci de commodité, à l’intention des utilisateurs et ne sauraient constituer un engagement.
Pour une explication de la nature volontaire des normes, la signification des termes et expressions
spécifiques de l'ISO liés à l'évaluation de la conformité, ou pour toute information au sujet de l'adhésion de
l'ISO aux principes de l’Organisation mondiale du commerce (OMC) concernant les obstacles techniques au
commerce (OTC), voir www.iso.org/avant-propos.
Le présent document a été élaboré par le comité technique ISO/TC 213, Spécifications et vérification
dimensionnelles et géométriques des produits, en collaboration avec le comité technique CEN/TC 290,
Spécification dimensionnelle et géométrique des produits, et vérification correspondante, du Comité européen
de normalisation (CEN) conformément à l’Accord de coopération technique entre l’ISO et le CEN (Accord de
Vienne).
Cette deuxième édition annule et remplace la première édition (ISO 2768-1:1989), qui a fait l’objet d’une
révision technique.
Les principales modifications sont les suivantes:
— suppression de l’Article 6;
— révision du domaine d’application pour le limiter aux tailles linéaires et angulaires, pour s'aligner avec la
série ISO 14405;
— suppression des limites de tolérance des arêtes abattues (rayons extérieurs et hauteurs de chanfreins);
— extension du champ d’application aux pièces indépendantes du matériau et de la méthode de fabrication.
Il convient que l’utilisateur adresse tout retour d’information ou toute question concernant le présent
document à l’organisme national de normalisation de son pays. Une liste exhaustive desdits organismes se
trouve à l’adresse www.iso.org/fr/members.html.

iv
Introduction
Le présent document est une norme de spécification géométrique des produits (GPS) et est à considérer
comme une norme ISO GPS complémentaire (voir l’ISO 14638). Il influence le maillon A des chaînes de
normes relatives à la taille.
Le modèle de matrice ISO GPS de l’ISO 14638 donne une vue d’ensemble du système ISO GPS dont le présent
document fait partie. Les principes fondamentaux du système ISO GPS donnés dans l’ISO 8015 s’appliquent
au présent document et les règles de décision par défaut données dans l’ISO 14253-1 s’appliquent aux
spécifications faites conformément au présent document, sauf indication contraire.
Pour de plus amples informations sur la relation du présent document avec les autres normes et le modèle de
matrice ISO GPS, voir l’Annexe C, Tableau C.1.
Ce document contient des tableaux de limites de tolérance pour les tailles linéaires et les tailles angulaires.
L’ISO 2768:1973 était une norme de tolérance générale pour les pièces produites par des procédés
d’enlèvement de métal.
L’ISO 2768-1:1989 a mis à jour les tolérances et élargi les tableaux pour couvrir une gamme plus large de
tailles nominales, et a introduit des tolérances pour les arêtes abattues (rayons extérieurs et hauteurs de
chanfreins). Il a également changé le champ d’application en ajoutant des pièces formées à partir de tôle. Des
changements significatifs se sont produits dans l’industrie depuis la publication de ces normes, par exemple
la performance des machines, la capabilité des procédés, la métrologie ou la planification des processus.
Les limites de tolérance contenues dans le présent document n’ont pas été mises à jour. Par conséquent le
présent document n'est plus représentatif de l’état de l'art actuel dans l’industrie.
Toutefois, l’ISO 2768-1:1989 est encore largement utilisée et son utilisation est toujours répandue dans
l’industrie. L’ISO 2768-1:1989 est parfois même utilisée pour des pièces en matériaux non métalliques ou
fabriquées avec un procédé autre que l’usinage. Cependant, ces matériaux et ce procédé de fabrication ne
faisaient pas partie des hypothèses formulées pour la détermination des valeurs contenues ici.
Le présent document a pour but de continuer à fournir aux utilisateurs un ensemble de valeurs qui est
toujours considéré une source d’information utile par de nombreuses entreprises dans le monde, tout
en supprimant la principale source d’ambiguïtés qui était présente dans l’ISO 2768-1:1989. Le présent
document, utilisé en conjonction avec l’ISO 22081, minimise les ambiguïtés et les erreurs d’interprétation et
respecte les contraintes héritées du passé en utilisant les mêmes valeurs que celles utilisées dans le passé
pour la spécification générale des tailles linéaires et angulaires.
Il est rappelé à l’utilisateur que la sélection des limites de tolérance issues d’une analyse fonctionnelle permet
souvent d'avoir un produit optimisé. Cela est en opposition avec la sélection de valeurs à partir des tableaux
du présent document qui ne sont pas corrélées aux besoins fonctionnels. Pour plus d'informations, voir les
hypothèses et principes fondamentaux énoncés dans l’ISO 8015.

v
Norme internationale ISO 2768:2026(fr)
Spécification géométrique des produits (GPS) —
Tolérancement dimensionnel — Limites de tolérance pour la
spécification générale des tailles linéaires et angulaires
1 Domaine d’application
Le présent document établit un système de limites de tolérance en utilisant des classes de tolérance pour les
tailles linéaires et angulaires.
Le présent document s'applique aux spécifications générales de taille pour les éléments avec une taille
linéaire nominale allant de 0,5 mm jusqu'à et y compris 4 000 mm, et aux éléments avec toute taille angulaire
nominale. Les limites de tolérance données sont destinées à être utilisées avec les opérateurs de spécification
par défaut du système ISO GPS.
NOTE 1 Voir l'ISO 14405-1 et l'ISO 14405-3 pour plus d’informations concernant les tailles, y compris les opérateurs
de spécification par défaut.
Le présent document ne s’applique pas aux autres types de spécifications dimensionnelles, telles que les
distances linéaires et angulaires, etc.
NOTE 2 Voir l’ISO 14405-2 pour plus d’informations concernant les distances et autres types de dimensions.
Le présent document est applicable seul, conjointement avec l’ISO 22081 ou tout autre doc
...