Abstract

This document establishes a system of tolerance limits utilizing tolerance classes for linear and angular sizes.
This document is applicable to general size specifications for features with a nominal linear size from 0,5 mm up to and including 4 000 mm, and to features with any nominal angular size. The given tolerance limits are intended to be used with the default specification operators from the ISO GPS system.
NOTE 1        See ISO 14405-1 and ISO 14405-3 for further information regarding sizes including default specification operators.
This document does not apply to other types of dimensional specifications, such as linear and angular distances etc.
NOTE 2        See ISO 14405-2 for further information regarding distances and other types of dimensions.
This document is applicable on its own, in conjunction with ISO 22081 or any other document for general specifications as long as the interactions are unambiguously described.
NOTE 3        See ISO 8015 for information about the responsibility principle, the general specification principle, etc.

Status
Not Published
Publication Date
17-Nov-2026
Technical Committee
CEN/SS I03 - Limits & Fits
Drafting Committee
CEN/SS I03 - Limits & Fits
Current Stage
6055 - CEN Ratification completed (DOR) - Publishing
Start Date
02-Jul-2026
Completion Date
02-Jul-2026

Buy Documents

EN ISO 2768:2026 is a CEN standard in the Geometrical product specifications (GPS) family. It sets general tolerance limits for linear sizes and angular sizes, so designers, drafters, suppliers, and quality teams can specify a size tolerance class on the drawing instead of giving an individual tolerance for every feature.

What does EN ISO 2768:2026 specify?

EN ISO 2768:2026 specifies a system of tolerance limits for general size specifications. Clause 1 limits the scope to nominal linear sizes from 0,5 mm up to and including 4 000 mm, and to features with any nominal angular size.

The standard is intended for use with the default specification operators from the ISO GPS system. It applies to size specifications that have an explicitly stated nominal size and no individual tolerance indication, and it is not for other dimensional specifications such as distances.

It can be used on its own, or together with ISO 22081 or another general-specification document when the interaction is made unambiguous.

AnnexWhat it covers
Annex AExample of using the document together with ISO 22081
Annex BFormer practice that has been removed from this edition
Annex CRelation to the ISO GPS matrix model

What are the key requirements of EN ISO 2768:2026?

EN ISO 2768:2026 gives the tolerance classes and the rules for selecting them. In practice, the document tells you which class to choose, how to read the limits, and where the limits do and do not apply.

1. Use the document only for general size specifications

Clause 4 says the limits are for general size specifications in the ISO GPS system and may be used with ISO 22081. They apply only when the drawing gives a nominal size and leaves the tolerance to this standard.

For a reader, that means you must not mix these limits with an individual tolerance on the same feature unless the specification system clearly says how they interact.

2. Select one of four tolerance classes

Clause 4 provides four classes: f (fine), m (medium), c (coarse), and v (very coarse). The drawing should identify the chosen class when referring to this standard.

This matters because the class is the direct link between the drawing and the actual permitted variation.

3. Choose linear-size limits from Table 1

Clause 5.1 uses the nominal linear size and the selected class to determine the limit from Table 1. The table covers sizes from 0,5 mm to 4 000 mm.

In practice, the engineer or buyer checks the nominal size band and then applies the matching plus-or-minus limit for the chosen class.

4. Choose angular-size limits from Table 2

Clause 5.2 selects angular limits using the nominal feature length and the chosen class from Table 2. For cones and frustums, the relevant length is the generatrix; for wedges, it is the shortest nominal integral line length.

This matters because angular tolerance depends on the size of the feature, not only on the angle value itself.

5. Do not apply the limits to TED or auxiliary dimensions

Clause 4 excludes Theoretical Exact Dimensions (TED) and auxiliary dimensions. The standard also points users to ISO 14405-1 and ISO 14405-3 for the default specification operator and modifiers.

For users, this means the limits are for specified sizes, not for reference dimensions or construction dimensions.

6. Keep the broader GPS rules in view

The introduction says ISO 8015 applies, and ISO 14253-1 gives the default decision rules for conformity assessment unless otherwise stated. Annex C places the document in chain link A of the ISO GPS matrix model.

That means the standard is part of a larger specification and verification system, not a stand-alone tolerancing method.

What terms does EN ISO 2768:2026 define?

EN ISO 2768:2026 relies on a small set of GPS terms that matter for using the tables correctly.

  • Geometrical product specifications (GPS) - the ISO system used to specify and verify geometry.
  • Tolerance class - one of the four general levels in the document: f, m, c, or v.
  • Nominal linear size - the stated size used to select the linear tolerance limit.
  • Nominal angular size - the stated angle used to select the angular tolerance limit.
  • Theoretical Exact Dimensions (TED) - exact reference dimensions that are not to be treated as general size specifications here.
  • Technical Product Documentation (TPD) - the contract or drawing set where the general specification is stated.

Who uses EN ISO 2768:2026?

EN ISO 2768:2026 is used by mechanical designers, detail drafters, manufacturing engineers, suppliers, and quality personnel who need a common tolerance statement for many sizes on a part. It is useful in design and quoting, on drawings, in inspection planning, and when checking whether a feature should be governed by a general tolerance or an individual one.

It is relevant across parts made by different materials and manufacturing methods, because the revised edition extends the field of application in that direction.

What changed in EN ISO 2768:2026 from the previous edition?

EN ISO 2768:2026 cancels and replaces ISO 2768-1:1989. The revision is described as technically revised, with these main changes:

  • editorial rework to align with current ISO GPS standards
  • rule and text rework to align with current ISO GPS standards
  • removal of Clause 6, the rejection rule
  • restriction of scope to linear sizes and angular sizes
  • removal of tolerance limits for broken edges, radii, and chamfers
  • extension to parts independent of material and manufacturing method

Which standards are used with EN ISO 2768:2026?

EN ISO 2768:2026 is used together with several GPS standards named in the document.

  • ISO 8015 - gives the GPS concepts, principles, and rules that frame the standard.
  • ISO 14405-1 - provides the rules for linear sizes.
  • ISO 14405-3 - provides the rules for angular sizes.
  • ISO 22081 - gives the framework for general geometrical specifications and general size specifications.
  • ISO 14253-1 - gives the default decision rules for verifying conformity or nonconformity.
  • ISO 14638 - places the document in the ISO GPS matrix model.
  • ISO 14405-2 - is referenced for dimensions other than linear or angular sizes.

What does the EN ISO 2768:2026 document contain?

EN ISO 2768:2026 contains two tolerance tables, one for linear sizes and one for angular sizes. It also includes a figure showing how to reference the document with a selected class, and figures explaining the geometric meaning of the angular-size length for cones, frustums, and wedges.

Annex A gives an example of using the standard with ISO 22081. Annex B explains former practice that was removed. Annex C shows how the standard fits into the ISO GPS matrix model and where it sits in the system.

Relations

Effective Date
12-Feb-2026
Effective Date
19-Jan-2023

Buy Documents

Get Certified

Connect with accredited certification bodies for this standard

BSMI (Bureau of Standards, Metrology and Inspection)

Taiwan's standards and inspection authority.

TAF Taiwan Verified

Sponsored listings

Frequently Asked Questions

EN ISO 2768:2026 is a draft published by the European Committee for Standardization (CEN). Its full title is "Geometrical product specifications (GPS) - Dimensional tolerancing - Tolerance limits for general specification of linear and angular sizes (ISO 2768:2026)". This standard covers: This document establishes a system of tolerance limits utilizing tolerance classes for linear and angular sizes. This document is applicable to general size specifications for features with a nominal linear size from 0,5 mm up to and including 4 000 mm, and to features with any nominal angular size. The given tolerance limits are intended to be used with the default specification operators from the ISO GPS system. NOTE 1        See ISO 14405-1 and ISO 14405-3 for further information regarding sizes including default specification operators. This document does not apply to other types of dimensional specifications, such as linear and angular distances etc. NOTE 2        See ISO 14405-2 for further information regarding distances and other types of dimensions. This document is applicable on its own, in conjunction with ISO 22081 or any other document for general specifications as long as the interactions are unambiguously described. NOTE 3        See ISO 8015 for information about the responsibility principle, the general specification principle, etc.

This document establishes a system of tolerance limits utilizing tolerance classes for linear and angular sizes. This document is applicable to general size specifications for features with a nominal linear size from 0,5 mm up to and including 4 000 mm, and to features with any nominal angular size. The given tolerance limits are intended to be used with the default specification operators from the ISO GPS system. NOTE 1        See ISO 14405-1 and ISO 14405-3 for further information regarding sizes including default specification operators. This document does not apply to other types of dimensional specifications, such as linear and angular distances etc. NOTE 2        See ISO 14405-2 for further information regarding distances and other types of dimensions. This document is applicable on its own, in conjunction with ISO 22081 or any other document for general specifications as long as the interactions are unambiguously described. NOTE 3        See ISO 8015 for information about the responsibility principle, the general specification principle, etc.

EN ISO 2768:2026 is classified under the following ICS (International Classification for Standards) categories: 17.040.10 - Limits and fits; 17.040.40 - Geometrical Product Specification (GPS). The ICS classification helps identify the subject area and facilitates finding related standards.

EN ISO 2768:2026 has the following relationships with other standards: It is inter standard links to ISO 2768:2026, EN 22768-1:1993. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN ISO 2768:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI STANDARD
oSIST prEN ISO 2768:2025
01-december-2025
Specifikacija geometrijskih veličin izdelka (GPS) - Tolerance dimenzij - Meje
toleranc za splošno specifikacijo linearnih in kotnih velikosti (ISO/DIS 2768:2025)
Geometrical product specifications (GPS) - Dimensional tolerancing -Tolerance limits for
general specification of linear and angular sizes (ISO/DIS 2768:2025)
Allgemeintoleranzen
Spécification géométrique des produits (GPS) - Tolérancement dimensionnel - Limites
de tolérance pour la spécification générale des tailles linéaires et angulaires (ISO/DIS
2768:2025)
Ta slovenski standard je istoveten z: prEN ISO 2768
ICS:
17.040.10 Tolerance in ujemi Limits and fits
17.040.40 Specifikacija geometrijskih Geometrical Product
veličin izdelka (GPS) Specification (GPS)
oSIST prEN ISO 2768:2025 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN ISO 2768:2025
oSIST prEN ISO 2768:2025
DRAFT
International
Standard
ISO/DIS 2768
ISO/TC 213
Geometrical product specifications
Secretariat: BSI
(GPS) — Dimensional tolerancing
Voting begins on:
— Tolerance limits for general
2025-08-25
specification of linear and angular
Voting terminates on:
sizes
2025-11-17
Spécification géométrique des produits (GPS) — Tolérancement
dimensionnel — Limites de tolérance pour la spécification
générale des tailles linéaires et angulaires
ICS: 17.040.40
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 2768:2025(en)
oSIST prEN ISO 2768:2025
DRAFT
ISO/DIS 2768:2025(en)
International
Standard
ISO/DIS 2768
ISO/TC 213
Geometrical product specifications
Secretariat: BSI
(GPS) — Dimensional tolerancing
Voting begins on:
— Tolerance limits for general
specification of linear and angular
Voting terminates on:
sizes
Spécification géométrique des produits (GPS) — Tolérancement
dimensionnel — Limites de tolérance pour la spécification
générale des tailles linéaires et angulaires
ICS: 17.040.40
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2025
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 2768:2025(en)
ii
oSIST prEN ISO 2768:2025
ISO/DIS 2768:2025(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 General . 1
5 Tolerance limits . 2
5.1 Linear sizes .2
5.1.1 Tolerance limits selection for linear sizes.2
5.1.2 Tolerance limits for linear sizes .2
5.2 Angular sizes .3
5.2.1 Tolerance limits selection for angular sizes .3
5.2.2 Nominal integral line length for a cone or a frustum .3
5.2.3 Nominal integral line length for a wedge .3
5.2.4 Tolerance limits for angular sizes .5
Annex A (informative) Example of the use of this document in conjunction with ISO 22081. 6
Annex B (informative) Former practice . 7
Annex C (informative) Relation to the ISO GPS matrix model . 8
Bibliography . 9

iii
oSIST prEN ISO 2768:2025
ISO/DIS 2768:2025(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 213, Dimensional and geometrical product
specifications and verification.
This second edition cancels and replaces the first edition (ISO 2768-1:1989), which has been technically
revised.
The main changes are as follows:
— Editorial rework to make this document consistent with current ISO GPS standards
— Rules and text rework to make this document consistent with current ISO GPS standards
— Removal of Clause 6: Rejection rule from this document
— Restriction of the scope of this document to linear sizes and angular sizes to be consistent with
ISO 14405-1, ISO 14405-2 and ISO 14405-3
— Removal of tolerance limits for broken edges, radii and chamfers, from this document
— Extension of field of application to parts independent of material and manufacturing method
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.

iv
oSIST prEN ISO 2768:2025
ISO/DIS 2768:2025(en)
Introduction
This document is a geometrical product specification (ISO GPS) standard and is to be regarded as a
complementary ISO GPS standard (see ISO 14638). It influences chain link A of the chains of standards on size.
The ISO GPS matrix model given in ISO 14638 gives an overview of the ISO GPS system of which this
document is a part. The fundamental rules of ISO GPS given in ISO 8015 apply to this document and the
default decision rules given in ISO 14253-1 apply to the specifications made following this document, unless
otherwise indicated.
For more detailed information of the relation of this document to other standards and the ISO GPS matrix
model, see Annex C, Table C.1.
This document contains tables of tolerance limits for linear sizes and angular sizes.
ISO 2768:1973 was a general tolerance standard for parts produced by metal removal processes.
ISO 2768-1:1989 updated the tolerances and extended the tables covering a wider range of nominal sizes, and
introduced tolerance for chamfers and radii. It also changed the field of application by adding parts formed
from sheet metal. Significant changes have occurred in industry since the theses standards was released, for
example, machine performance, process capability, metrology or process planning. As the tolerance limits
contained in this document have not been updated, they are probably no longer representative of the current
state of the art in industry
However, it is observed that ISO 2768-1:1989 is still heavily used and that its usage is still widespread in
industry. ISO 2768-1:1989 is sometimes even used for parts made of non-metallic materials or manufactured
with process other than machining. However, those materials and manufacturing process were not part of
the assumptions made for the determination of the values contained herein.
This revised document intends
...