ISO 1122-1:1998/Cor 2:2009
(Corrigendum)Vocabulary of gear terms - Part 1: Definitions related to geometry - Technical Corrigendum 2
Vocabulary of gear terms - Part 1: Definitions related to geometry - Technical Corrigendum 2
Concerns the part of the international vocabulary of gears which is devoted solely to geometrical definitions. It gives, for each of the geometrical terms relative to gears, a standard definitions which will be valid internationally, to corresponding term in each langauge being chosen as far as possible in such a way as to directly reflect the meaning of the definition.
Wörterverzeichnis für Zahnräder - Teil 1: Geometrische Definitionen; Korrektur 2
Vocabulaire des engrenages — Partie 1: Définitions géométriques — Rectificatif technique 2
Terminološki slovar za zobniške prenosnike - 1. del: Geometrijske definicije - Tehnični popravek 2
General Information
Relations
Frequently Asked Questions
ISO 1122-1:1998/Cor 2:2009 is a corrigendum published by the International Organization for Standardization (ISO). Its full title is "Vocabulary of gear terms - Part 1: Definitions related to geometry - Technical Corrigendum 2". This standard covers: Concerns the part of the international vocabulary of gears which is devoted solely to geometrical definitions. It gives, for each of the geometrical terms relative to gears, a standard definitions which will be valid internationally, to corresponding term in each langauge being chosen as far as possible in such a way as to directly reflect the meaning of the definition.
Concerns the part of the international vocabulary of gears which is devoted solely to geometrical definitions. It gives, for each of the geometrical terms relative to gears, a standard definitions which will be valid internationally, to corresponding term in each langauge being chosen as far as possible in such a way as to directly reflect the meaning of the definition.
ISO 1122-1:1998/Cor 2:2009 is classified under the following ICS (International Classification for Standards) categories: 01.040.21 - Mechanical systems and components for general use (Vocabularies); 21.200 - Gears. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 1122-1:1998/Cor 2:2009 has the following relationships with other standards: It is inter standard links to ISO 1122-1:1998. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase ISO 1122-1:1998/Cor 2:2009 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of ISO standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Wörterverzeichnis für Zahnräder - Teil 1: Geometrische Definitionen;
Korrektur 2Vocabulaire des engrenages - Partie 1: Définitions géométriques;
Rectificatif Technique 2Vocabulary of gear terms - Part 1: Definitions related to geometry;
Technical Corrigendum 221.200GonilaGears01.040.21Mehanski sistemi in deli za splošno rabo (Slovarji)Mechanical systems and components for general use (Vocabularies)ICS:Ta slovenski standard je istoveten z:ISO 1122-1:1998/Cor 2:2009SIST ISO 1122-1:1998/Cor 2:2009en,fr01-december-2009SIST ISO 1122-1:1998/Cor 2:2009SLOVENSKI
STANDARD
ICS
01.040.21;
21.200 Ref. No./Réf. no ISO 1122-1:1998/Cor.2:2009(E/F)© ISO 2009 – All rights reserved/Tous droits réservés Published in Switzerland/Publié en Suisse
INTERNATIONAL STANDARD ISO 1122-1:1998 TECHNICAL CORRIGENDUM 2 NORME INTERNATIONALE ISO 1122-1:1998 RECTIFICATIF TECHNIQUE 2 P
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...