iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO/TR 10840:1993/Cor 1:1995

(Corrigendum)

Plastics — Burning behaviour — Guidance for development and use of fire tests — Technical Corrigendum 1

Plastics — Burning behaviour — Guidance for development and use of fire tests — Technical Corrigendum 1

In Table 1 in column 3, delete the reference to IEC 195.

Plastiques — Lignes directrices pour le développement et l'utilisation d'essais au feu — Rectificatif technique 1

General Information

Status
Withdrawn
Publication Date
08-Nov-1995
Withdrawal Date
08-Nov-1995
ICS
13.220.40 - Ignitability and burning behaviour of materials and products
83.080.01 - Plastics in general
Technical Committee
ISO/TC 61/SC 4 - Burning behaviour
Drafting Committee
ISO/TC 61/SC 4 - Burning behaviour
Current Stage
9599 - Withdrawal of International Standard
Completion Date
12-Mar-2003
Ref Project

Relations

Revised
ISO 10840:2003 - Plastics — Guidance for the use of standard fire tests
Effective Date
15-Apr-2008
Corrects
ISO/TR 10840:1993 - Plastics — Burning behaviour — Guidance for development and use of fire tests
Effective Date
06-Jun-2022
Child
ISO/TR 10840:1993 - Plastics — Burning behaviour — Guidance for development and use of fire tests
Effective Date
15-Apr-2008
Child
SIST ISO/TR 10840:1996 - Plastics -- Burning behaviour -- Guidance for development and use of fire tests
Effective Date
12-May-2008

Buy Standard

ISO/TR 10840:1993/Cor 1:1995ISO/TR 10840:1993/Cor 1:1995
PreviousNext
Technical report
ISO/TR 10840:1993/Cor 1:1995
English language
1 pages
sale 15% off
Preview
sale 15% off
Preview
ISO/TR 10840:1993/Cor 1:1995ISO/TR 10840:1993/Cor 1:1995
PreviousNext
Technical report
ISO/TR 10840:1993/Cor 1:1995
French language
1 pages
sale 15% off
Preview
sale 15% off
Preview
ISO/TR 10840:1993/Cor 1:1995ISO/TR 10840:1993/Cor 1:1995
PreviousNext
Technical report
ISO/TR 10840:1993/Cor 1:1995
French language
1 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

TECHNICAL REPORT ISO/TR 10840:1993
TECHNICAL CORRIGENDUM 1
Published 1995-11-15
INTERNATIONAL ORGANKATION FOR STANDARDRATION. M~YHAPOflHAFl OPrAHH3A~HR fl0 CTAHJJAPTH3A~HH. ORGANISATION INTERNATIONALE DE NORMALISATION
Plastics - Burning behaviour - Guidance for development
and use of fire tests
TECHNICAL CORRIGENDUM 1
Plastiques - Lignes directrices pour Ie dkveloppement et I ’utilisation d ’essais au feu
RECTIFICATIF TECHNIQUE 1
Technical corrigendum 1 to Technical Report ISO/TR 10840:1993 was prepared
...

RAPPORT TECHNIQUE ISO/TR 10840:1993
RECTIFICATIF TECHNIQUE 1
Publié 1995-11-15
INTERNATIONAL ORGANKATION FOR STANDARDIZATION~ M~YHAPOflHAFl OPrAHH3A~HR Il0 CTAH~APTH3A~HH. ORGANISATION INTERNATIONALE DE NORMALISATION
Plastiques - Lignes directrices pour le développement et
l’utilisation d’essais au feu
RECTIFICATIF TECHNIQUE 1
Plastics - Burning behaviour - Guidance for development and use of fire tests
TECHNICAL CORRIGENDUM I
Le Rectificatif technique 1 au Rapport technique ISO/TR 10840:1993 a été élaboré par le comité
...

RAPPORT TECHNIQUE ISO/TR 10840:1993
RECTIFICATIF TECHNIQUE 1
Publié 1995-11-15
INTERNATIONAL ORGANKATION FOR STANDARDIZATION~ M~YHAPOflHAFl OPrAHH3A~HR Il0 CTAH~APTH3A~HH. ORGANISATION INTERNATIONALE DE NORMALISATION
Plastiques - Lignes directrices pour le développement et
l’utilisation d’essais au feu
RECTIFICATIF TECHNIQUE 1
Plastics - Burning behaviour - Guidance for development and use of fire tests
TECHNICAL CORRIGENDUM I
Le Rectificatif technique 1 au Rapport technique ISO/TR 10840:1993 a été élaboré par le comité
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 23949:2023(Main)
Plastics — Application of spread of flame test to plastic pipes

This document specifies test methods for assessing the flame spread of plastic pipes including fiberglass reinforced plastic (FRP) pipes. This document is applicable to plastic pipes including FRP pipes for use in ships, air crafts and vehicles.

  • Standard
    10 pages
    English language
    sale 15% off
  • Draft
    10 pages
    English language
    sale 15% off
  • Draft
    10 pages
    English language
    sale 15% off
ISO
ISO/TS 15791-2:2022(Main)
Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 2: Use of intermediate-scale tests for semi-finished and finished products

This document provides guidelines and specifies requirements for the development and use of intermediate-scale fire tests applicable to semi-finished and finished products made of, or containing, plastics. This document covers typical applications of such tests, as well as methods of preparation and mounting of test specimens. This document applies to planar, linear or profiled plastics products. These products can be tested in horizontal or vertical orientation. This document defines the parameters to be measured, the way that test results are expected to be reported and explains how they can be used for direct product assessment or as input data for scaling studies.

  • Technical specification
    14 pages
    English language
    sale 15% off
  • Draft
    14 pages
    English language
    sale 15% off
  • Draft
    14 pages
    English language
    sale 15% off
ISO
ISO 871:2022(Main)
Plastics — Determination of ignition temperature using a hot-air furnace

This document specifies a laboratory method for determining the flash-ignition temperature and spontaneous-ignition temperature of plastics using a hot-air furnace. It is one of a number of methods in use for evaluating the reaction of plastics to the effects of ignition sources. NOTE Information on additional ignition methods can be found in ISO 10093. This method does not give a direct measure of the combustibility or rate of burning of a material or any definition of the safe upper limit of temperature for the plastics in use, and it is inappropriate to use it alone to describe or appraise the fire hazard or fire risk of materials, products or assemblies under actual fire conditions. However, results of this test are suitable for use as elements of a fire hazard or fire risk assessment which takes into account all of the factors pertinent to an assessment of the fire hazard of a particular end use. Tests made under conditions of this method are potentially of considerable value in comparing the relative ignition characteristics of different materials. Values obtained represent the lowest ambient air temperature that has the potential to cause ignition of the material under the conditions of this test. Test values are expected to rank materials according to ignition susceptibility under actual use conditions. The results of this test method are not intended for fire safety engineering calculations.

  • Standard
    17 pages
    English language
    sale 15% off
  • Draft
    17 pages
    English language
    sale 15% off
ISO
ISO 4589-4:2021(Main)
Plastics — Determination of burning behaviour by oxygen index — Part 4: High gas velocity test

This document specifies a test method for determining the minimum volume fraction of oxygen, in admixture with nitrogen, at ambient temperature, that supports combustion of small vertical sheet test specimen under a specified gas velocity that is higher than that specified in ISO 4589-2. NOTE The result is expressed as a high gas velocity oxygen index (HOI). In addition, this document specifies the testing apparatus for determining the HOI. The test method is applicable to materials in the form of sheets up to 2 mm thick. It is also applicable to flexible sheet materials that are supported vertically by a specified specimen holder.

  • Standard
    29 pages
    English language
    sale 15% off
  • Draft
    29 pages
    English language
    sale 15% off
ISO
ISO 10093:2020(Main)
Plastics — Fire tests — Standard ignition sources

This document describes and classifies a range of laboratory ignition sources for use in fire tests on plastics and products consisting substantially of plastics. These sources vary in intensity and area of impingement. They are suitable for use to simulate the initial thermal abuse to which plastics are potentially exposed in certain actual fire risk scenarios. This compilation of standard ignition sources describes the ignition sources used by different standards development organizations and contained in standard test methods, specifications, or regulations used to assess the fire properties or plastics and of products containing plastic materials. The ignition sources described in this document are associated with flaming and non-flaming ignition. This document describes the relevant ignition sources and references the associated standard. This compilation of ignition sources does not discuss the application of the standard referenced in any specific clause in which the ignition source is described, and this compilation is likely not to be a fully comprehensive list of ignition sources. This document does not address detailed test procedures.

  • Standard
    37 pages
    English language
    sale 15% off
  • Draft
    37 pages
    English language
    sale 15% off
ISO
ISO 11907-1:2019(Main)
Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 1: General concepts and applicability

The document defines terms related to smoke corrosivity as well as smoke acidity and smoke toxicity. It presents the scenario-based approach that controls smoke corrosivity. It describes the test methods to assess smoke corrosivity at laboratory scale and deals with test applicability and post-exposure conditions. This document is applicable to tests of determination of smoke corrosivity from combustion of materials samples.

  • Standard
    6 pages
    English language
    sale 15% off
ISO
ISO 5659-2:2017(Main)
Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test

ISO 5659-2:2017 specifies a method of measuring smoke production from the exposed surface of specimens of materials or composites. It is applicable to specimens that have an essentially flat surface and do not exceed 25 mm in thickness when placed in a horizontal orientation and subjected to specified levels of thermal irradiance in a closed cabinet with or without the application of a pilot flame. This method of test is applicable to all plastics. It is intended that the values of optical density determined by this test be taken as specific to the specimen or assembly material in the form and thickness tested and are not to be considered inherent, fundamental properties. The test is intended primarily for use in research and development and fire safety engineering in buildings, trains, ships, etc. and not as a basis for ratings for building codes or other purposes. No basis is provided for predicting the density of smoke that can be generated by the materials upon exposure to heat and flame under other (actual) exposure conditions. This test procedure excludes the effect of irritants on the eye.

  • Standard
    49 pages
    English language
    sale 15% off
  • Standard
    50 pages
    French language
    sale 15% off
ISO
ISO 4589-2:2017(Main)
Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test

ISO 4589-2:2017 specifies methods for determining the minimum volume fraction of oxygen, in admixture with nitrogen, that will support combustion of small vertical test specimens under specified test conditions. The results are defined as oxygen index (OI) values. Methods are provided for testing materials that are self-supporting in the form of vertical bars or sheets up to 10,5 mm thick. These methods are suitable for solid, laminated or cellular materials characterized by an apparent density 100 kg/m3 or greater. The methods might also be applicable to some cellular materials having an apparent density of less than 100 kg/m3. A method is provided for testing flexible sheets or film materials while supported vertically. For comparative purposes, a procedure is provided for determining whether or not the OI of a material lies above some specified minimum value.

  • Standard
    27 pages
    English language
    sale 15% off
  • Standard
    30 pages
    French language
    sale 15% off
ISO
ISO 4589-1:2017(Main)
Plastics — Determination of burning behaviour by oxygen index — Part 1: General requirements

ISO 4589-1:2017 specifies the general requirements for the oxygen index (OI) test which are further described in ISO 4589‑2 and ISO 4589‑3 as follows: - ISO 4589‑2 describes a method for determining the minimum volume fraction of oxygen in a mixture of oxygen and nitrogen introduced at 23 °C ± 2 °C that will just support combustion of a material under specified test conditions; - ISO 4589‑3 describes methods of carrying out the same determination over a range of temperatures typically between 25 °C and 150 °C (although temperatures up to 400 °C can be used).

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
ISO
ISO 4589-3:2017(Main)
Plastics — Determination of burning behaviour by oxygen index — Part 3: Elevated-temperature test

ISO 4589-3:2017 specifies methods for determining the minimum volume fraction of oxygen, in a mixture with nitrogen, that will support combustion of small vertical test specimens under specified test conditions over a range of temperatures between 25 °C and 150 °C. The range of temperatures is typically between 40 °C and 150 °C. The results are defined as temperature index values at the test temperature, which is typical of the practical temperature that a plastic material can experience in an overheated service situation. Methods are provided for testing materials that are self-supporting at the test temperature in the form of vertical bars or sheet up to 10,5 mm thick. However, they are not applicable to form V which requires a supporting frame as defined in ISO 4589‑2:2017, Table 2. These methods are suitable for solid, laminated or cellular materials characterized by an apparent density 100 kg/m3 or higher. The methods are also applicable to some cellular materials having an apparent density of less than 100 kg/m3. A method is provided for testing flexible sheet or film materials while supported vertically. ISO 4589-3:2017 also includes a method (see Annex A) for determining the temperature at which the OI of small vertical test specimens in air is 20,9 % under specified test conditions. The temperature at which this occurs is defined as the flammability temperature (FT) and the method is limited to the determination of temperatures less than 400 °C. The method is not applicable to materials having an OI of

  • Standard
    19 pages
    English language
    sale 15% off
  • Standard
    20 pages
    French language
    sale 15% off