iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 3069:1974

(Main)

End suction centrifugal pumps — Dimensions of cavities for mechanical seals and for soft packing

End suction centrifugal pumps — Dimensions of cavities for mechanical seals and for soft packing

Pompes centrifuges à aspiration en bout — Dimensions des logements de garnitures mécaniques et de garnitures à tresse

General Information

Status
Withdrawn
Publication Date
30-Jun-1974
Withdrawal Date
30-Jun-1974
ICS
23.080 - Pumps
Technical Committee
ISO/TC 115 - Pumps
Drafting Committee
ISO/TC 115 - Pumps
Current Stage
9599 - Withdrawal of International Standard
Completion Date
16-Nov-2000
Ref Project

Relations

Revised
ISO 3069:2000 - End-suction centrifugal pumps — Dimensions of cavities for mechanical seals and for soft packing
Effective Date
15-Apr-2008

Buy Standard

ISO 3069:1974 - End suction centrifugal pumps -- Dimensions of cavities for mechanical seals and for soft packingISO 3069:1974 - End suction centrifugal pumps -- Dimensions of cavities for mechanical seals and for soft packing
PreviousNext
Standard
ISO 3069:1974 - End suction centrifugal pumps -- Dimensions of cavities for mechanical seals and for soft packing
English language
1 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 3069:1974 - Pompes centrifuges a aspiration en bout -- Dimensions des logements de garnitures mécaniques et de garnitures a tresseISO 3069:1974 - Pompes centrifuges a aspiration en bout -- Dimensions des logements de garnitures mécaniques et de garnitures a tresse
PreviousNext
Standard
ISO 3069:1974 - Pompes centrifuges a aspiration en bout -- Dimensions des logements de garnitures mécaniques et de garnitures a tresse
French language
1 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 3069:1974 - Pompes centrifuges a aspiration en bout -- Dimensions des logements de garnitures mécaniques et de garnitures a tresseISO 3069:1974 - Pompes centrifuges a aspiration en bout -- Dimensions des logements de garnitures mécaniques et de garnitures a tresse
PreviousNext
Standard
ISO 3069:1974 - Pompes centrifuges a aspiration en bout -- Dimensions des logements de garnitures mécaniques et de garnitures a tresse
French language
1 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

3069
!NTERNATIONAL ORGANIZATION FOR STANDARDIZATION l MEXAYHAPOAHAJl OPTAHM3AWiII I-IO CTAH,QAPTM3AUWi *ORGANISATION INTERNATIONALE DE NORMALISATION
End suction centrifugal Pumps - Dimensions of cavities for
mechanical Seals and for soft packing
Pompes ten trifuges 2 aspira tion en baut - Dimensions des logements de garnitures mkcaniques et de garnitures 2 tresse
First edition - 1974-07-01
UDC 621.671 Rhf. No ISO 3069-1974 (E)
Descriptors : Pumps, centrifugal Pumps, Seals (Stoppers), dimensions, diameters.
Price based on 1 page

---------------------- Page: 1 ----------------------
FOREWORD
ISO (the International Organization for Standardization) is a worldwide federation
of national Standards institutes (ISO Member Bodies). The work of developing
International Standards is carried out through ISO Technical Committees. Every
Member Body interested in a subject for which a Technical Committee has been set
up has the right to be represented on that Committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the Technical Committees are circulated
to the Member Bodies for approval before their acceptance as International
Standards by the ISO Council.
International Standard ISO 3069 was drawn up by Technical Committee
ISO/TC 115, Pumps, and circulated to the Member Bodies in February 1973.
lt has been approved by the Member Bodies of the following countries :
Austria Israel Spain
Belgium Italy Sweden
Bulgaria Japan Switzerland
Czechoslovakia Mexico Thailand
Finland Netherlands Turkey
Fra nee Poland United Kingdom
Germany Portugal U.S.A.
Hungary Romania
India
...

3069
NORME INTERNATIONALE
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION 4vlEX~YHAPOAHAII OPI-AHM3ALWl l-l0 CTAHAAPTW3AI@ïH=ORGANISATION INTERNATIONALE DE NORMALISATION
Pompes centrifuges à aspiration en bout - Dimensions des
logements de garnitures mécaniques et de garnitures à tresse
End suction cen trifugal pumps - Dimensions of cavities for mechanicat seals and for soft packing
Première édition - 1974-07-01
Réf. No : ISO 3069-1974 (F)
CDU 621.671
Descripteurs : pompe, pompe centrifuge, joint d’étanchéité, dimension, diamètre.
Prix basé sur 1 page

---------------------- Page: 1 ----------------------
AVANT-PROPOS
L’ISO (Organisation Internationale de Normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (Comités Membres KO). L’élaboration de
Normes Internationales est confiée aux Comités Techniques ISO. Chaque Comité
Membre intéressé par une étude a le droit de faire partie du Comité Technique
correspondant. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO, participent également aux travaux.
Les Projets de Normes Internationales adoptés par les Comités Techniques sont
soumis aux Comités Membres pour approbation. avant leur acceptation comme
Normes Internationales par le Conseil de I’ISO.
La Norme Internationale ISO 3069 a été établie par le Comité Technique
lSO/TC 115, Pompes, et soumise aux Comités Membres en février 1973.
Elle a été approuvée par les Comités Membres des pays suivants :
Afrique du Sud, Rép. d’ Inde
Royaume-Uni
Allemagne Israël
Suède
Autriche
Italie Suisse
Belgique
Japon Tchécoslovaquie
Bulgarie Mexique
Thaïlande
Espagne Pays-Bas
Turquie
Finlande Pologne
U.S.A.
France Portugal
Hongrie
Roumanie
Le Comité Membr
...

3069
NORME INTERNATIONALE
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION 4vlEX~YHAPOAHAII OPI-AHM3ALWl l-l0 CTAHAAPTW3AI@ïH=ORGANISATION INTERNATIONALE DE NORMALISATION
Pompes centrifuges à aspiration en bout - Dimensions des
logements de garnitures mécaniques et de garnitures à tresse
End suction cen trifugal pumps - Dimensions of cavities for mechanicat seals and for soft packing
Première édition - 1974-07-01
Réf. No : ISO 3069-1974 (F)
CDU 621.671
Descripteurs : pompe, pompe centrifuge, joint d’étanchéité, dimension, diamètre.
Prix basé sur 1 page

---------------------- Page: 1 ----------------------
AVANT-PROPOS
L’ISO (Organisation Internationale de Normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (Comités Membres KO). L’élaboration de
Normes Internationales est confiée aux Comités Techniques ISO. Chaque Comité
Membre intéressé par une étude a le droit de faire partie du Comité Technique
correspondant. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO, participent également aux travaux.
Les Projets de Normes Internationales adoptés par les Comités Techniques sont
soumis aux Comités Membres pour approbation. avant leur acceptation comme
Normes Internationales par le Conseil de I’ISO.
La Norme Internationale ISO 3069 a été établie par le Comité Technique
lSO/TC 115, Pompes, et soumise aux Comités Membres en février 1973.
Elle a été approuvée par les Comités Membres des pays suivants :
Afrique du Sud, Rép. d’ Inde
Royaume-Uni
Allemagne Israël
Suède
Autriche
Italie Suisse
Belgique
Japon Tchécoslovaquie
Bulgarie Mexique
Thaïlande
Espagne Pays-Bas
Turquie
Finlande Pologne
U.S.A.
France Portugal
Hongrie
Roumanie
Le Comité Membr
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 20361:2019(Main)
Liquid pumps and pumps units — Noise test code — Grades 2 and 3 of accuracy

This document specifies all the information necessary to carry out efficiently and under standardized conditions the determination, declaration, and verification of the airborne noise emission of liquid pumps or pump units (see 4.1). It specifies the noise measurement methods and the operating and mounting conditions that shall be used for the test. Noise emission characteristics include emission sound pressure levels at specified positions and the sound power level. The determination of these quantities is necessary for — declaring the noise emission values, and — purpose of noise control at source at the design stage. The determination of these quantities is also necessary for comparing the noise emitted by liquid pumps on the market. The use of this document ensures the reproducibility of the determination of the airborne noise-emission characteristics within specified limits determined by the grade of accuracy of the basic airborne noise measurement method used. Noise measurement methods according to this document are engineering methods (grade 2) and survey methods (grade 3). This document does not deal with the characterization of the structure-borne sound and liquid-borne noise generated by liquid pumps. NOTE This document is specified in EN 809+A1 for noise measurements of the pump (or pump unit).

  • Standard
    24 pages
    English language
    sale 15% off
  • Standard
    24 pages
    French language
    sale 15% off
ISO
ISO/ASME 14414:2019(Main)
Pump system energy assessment

This document sets the requirements for conducting and reporting the results of a pumping system energy assessment (hereafter referenced as "assessment") that considers the entire pumping system, from energy inputs to the work performed as the result of these inputs. The objective of a pumping system energy assessment is to determine the current energy consumption of an existing system and identify ways to improve system efficiency. These requirements consist of — organizing and conducting an assessment, — analysing the data from the assessment, and — reporting and documenting assessment findings. This document is designed to be applied, to open and closed loop pumping systems typically used at industrial, institutional, commercial, and municipal facilities, when requested. This document is focused on assessing electrically-driven pumping systems, which are dominant in most facilities, but is also applicable with other types of drivers, such as steam turbines and engines. The document does not a) specify how to design a pumping system, b) give detailed qualifications and expertise required of the person using the International Standard although provides a list of body of knowledge in Annex C, c) address the training or certification of persons, d) specify how to implement the recommendations developed during the assessment, but does include requirements for an action plan, e) specify how to measure and validate the energy savings that result from implementing assessment recommendations, f) specify how to make measurements and how to calibrate test equipment used during the assessment, g) specify how to estimate the implementation cost or conduct financial analysis for recommendations developed during the assessment, h) specify specific steps required for safe operation of equipment during the assessment. The facility personnel in charge of normal operation of the equipment are responsible for ensuring that it is operated safely during the data collection phase of the assessment, i) address issues of intellectual property, security, confidentiality, and safety.

  • Standard
    56 pages
    English language
    sale 15% off
  • Standard
    58 pages
    French language
    sale 15% off
ISO
ISO 17769-1:2012(Main)
Liquid pumps and installation — General terms, definitions, quantities, letter symbols and units — Part 1: Liquid pumps

ISO 17769-1:2012 specifies terms, letter symbols and units related to the flow of liquids through rotodynamic and positive displacement liquid pumps and associated installations. It serves as a means of clarifying communications between the installation designer, manufacturer, operator and plant constructor. It identifies the units in common usage, but all additional legal units can be used. ISO 17769-1:2012 deals solely with conditions described by positive values for the rate of flow and pump head.

  • Standard
    100 pages
    English language
    sale 15% off
ISO
ISO 17769-2:2012(Main)
Liquid pumps and installation — General terms, definitions, quantities, letter symbols and units — Part 2: Pumping system

ISO 17769-2:2012 specifies terms, letter symbols and units related to the flow of liquids through rotodynamic and positive displacement liquid pumps and associated installations. It serves as a means of clarifying communications between the installation designer, manufacturer, operator and plant constructor. ISO 17769-2:2012 identifies the units in common usage, but all additional legal units can be used. ISO 17769-2:2012 deals mainly with pumping systems.

  • Standard
    35 pages
    English language
    sale 15% off
ISO
ISO 3661:1977(Main)
End-suction centrifugal pumps — Baseplate and installation dimensions

Specifies basic dimensions and gives alternative numbers and locations of baseplate fixing holes to suit individual installations. Covers the baseplate numbers from 2 to 9. The data given are intended primarily for use with pumps in accordance with ISO 2858, coupled to foot-mounted electric motors for installation on a foundation.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
ISO
ISO 20361:2019(Main)
Liquid pumps and pumps units — Noise test code — Grades 2 and 3 of accuracy

This document specifies all the information necessary to carry out efficiently and under standardized conditions the determination, declaration, and verification of the airborne noise emission of liquid pumps or pump units (see 4.1). It specifies the noise measurement methods and the operating and mounting conditions that shall be used for the test. Noise emission characteristics include emission sound pressure levels at specified positions and the sound power level. The determination of these quantities is necessary for — declaring the noise emission values, and — purpose of noise control at source at the design stage. The determination of these quantities is also necessary for comparing the noise emitted by liquid pumps on the market. The use of this document ensures the reproducibility of the determination of the airborne noise-emission characteristics within specified limits determined by the grade of accuracy of the basic airborne noise measurement method used. Noise measurement methods according to this document are engineering methods (grade 2) and survey methods (grade 3). This document does not deal with the characterization of the structure-borne sound and liquid-borne noise generated by liquid pumps. NOTE This document is specified in EN 809+A1 for noise measurements of the pump (or pump unit).

  • Standard
    24 pages
    English language
    sale 15% off
  • Standard
    24 pages
    French language
    sale 15% off
ISO
ISO/ASME 14414:2019(Main)
Pump system energy assessment

This document sets the requirements for conducting and reporting the results of a pumping system energy assessment (hereafter referenced as "assessment") that considers the entire pumping system, from energy inputs to the work performed as the result of these inputs. The objective of a pumping system energy assessment is to determine the current energy consumption of an existing system and identify ways to improve system efficiency. These requirements consist of — organizing and conducting an assessment, — analysing the data from the assessment, and — reporting and documenting assessment findings. This document is designed to be applied, to open and closed loop pumping systems typically used at industrial, institutional, commercial, and municipal facilities, when requested. This document is focused on assessing electrically-driven pumping systems, which are dominant in most facilities, but is also applicable with other types of drivers, such as steam turbines and engines. The document does not a) specify how to design a pumping system, b) give detailed qualifications and expertise required of the person using the International Standard although provides a list of body of knowledge in Annex C, c) address the training or certification of persons, d) specify how to implement the recommendations developed during the assessment, but does include requirements for an action plan, e) specify how to measure and validate the energy savings that result from implementing assessment recommendations, f) specify how to make measurements and how to calibrate test equipment used during the assessment, g) specify how to estimate the implementation cost or conduct financial analysis for recommendations developed during the assessment, h) specify specific steps required for safe operation of equipment during the assessment. The facility personnel in charge of normal operation of the equipment are responsible for ensuring that it is operated safely during the data collection phase of the assessment, i) address issues of intellectual property, security, confidentiality, and safety.

  • Standard
    56 pages
    English language
    sale 15% off
  • Standard
    58 pages
    French language
    sale 15% off
ISO
ISO/TR 19688:2019(Main)
Rotodynamic pumps — Hydraulic performance acceptance test using a model pump

This document describes hydraulic performance tests (including cavitation tests) using a small size pump (centrifugal, mixed flow or axial pump, hereinafter referred to as a "model pump"). This document is used for pump acceptance tests with a geometrically similar model pump to guarantee the performance of a large size pump manufactured for practical use (hereinafter, a "prototype pump"). This document, however does not preclude a temporary assembly inspection or other tests on the prototype pump. Moreover, it is preferable to conduct the tests with prototype pumps unless — the capacity of the pump, namely its flow rate and/or its power input, is beyond the limitations of the test facility, though it is difficult to set a criterion for carrying out a model pump test instead of the prototype pump test in terms of the volume rate of flow or the power input, — a part of the pump is to be constructed by concrete walls and reproduction of the whole assembly is impractical, — model tests are specified by the purchaser, or — it is difficult to carry out the prototype pump test due to any other reasons. This document applies to performance tests under steady operating conditions corresponding to the prototype pump.

  • Technical report
    44 pages
    English language
    sale 15% off
  • Technical report
    46 pages
    French language
    sale 15% off
ISO
ISO 17769-2:2012(Main)
Liquid pumps and installation — General terms, definitions, quantities, letter symbols and units — Part 2: Pumping system

ISO 17769-2:2012 specifies terms, letter symbols and units related to the flow of liquids through rotodynamic and positive displacement liquid pumps and associated installations. It serves as a means of clarifying communications between the installation designer, manufacturer, operator and plant constructor. ISO 17769-2:2012 identifies the units in common usage, but all additional legal units can be used. ISO 17769-2:2012 deals mainly with pumping systems.

  • Standard
    35 pages
    English language
    sale 15% off
ISO
ISO 17769-1:2012(Main)
Liquid pumps and installation — General terms, definitions, quantities, letter symbols and units — Part 1: Liquid pumps

ISO 17769-1:2012 specifies terms, letter symbols and units related to the flow of liquids through rotodynamic and positive displacement liquid pumps and associated installations. It serves as a means of clarifying communications between the installation designer, manufacturer, operator and plant constructor. It identifies the units in common usage, but all additional legal units can be used. ISO 17769-1:2012 deals solely with conditions described by positive values for the rate of flow and pump head.

  • Standard
    100 pages
    English language
    sale 15% off