Light conveyor belts — Part 1: Principal characteristics and applications

ISO 21183-1:2005 describes the principal characteristics and applications of light conveyor belts. This description is necessary either for limiting the validity of certain standards to light conveyor belts or for excluding light conveyor belts from the validity of certain standards.

Courroies transporteuses légères — Partie 1: Caractéristiques et applications principales

L'ISO 21183-1:2005 décrit les caractéristiques et applications principales des courroies transporteuses légères. Cette description est nécessaire pour limiter, d'une part l'application des normes aux courroies transporteuses légères, d'autre part pour exclure les courroies transporteuses légères des autres normes.

General Information

Status
Published
Publication Date
08-Nov-2005
Current Stage
9093 - International Standard confirmed
Completion Date
18-Sep-2020
Ref Project

Buy Standard

Standard
ISO 21183-1:2005 - Light conveyor belts
English language
2 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 21183-1:2005 - Courroies transporteuses légeres
French language
2 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 21183-1
First edition
2005-11-01

Light conveyor belts —
Part 1:
Principal characteristics and applications
Courroies transporteuses légères —
Partie 1: Caractéristiques et applications principales




Reference number
ISO 21183-1:2005(E)
©
ISO 2005

---------------------- Page: 1 ----------------------
ISO 21183-1:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2005
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2005 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 21183-1:2005(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 21183-1 was prepared by Technical Committee ISO/TC 41, Pulleys and belts (including veebelts),
Subcommittee SC 3, Conveyor belts.
This part of ISO 21183 is based on EN 873:1996, prepared by CEN/TC 188.
ISO 21183 consists of the following parts, under the general title Light conveyor belts:
⎯ Part 1: Principal characteristics and applications
⎯ Part 2: List of equivalent terms

© ISO 2005 – All rights reserved iii

---------------------- Page: 3 ----------------------
INTERNATIONAL STANDARD ISO 21183-1:2005(E)

Light conveyor belts —
Part 1:
Principal characteristics and applications
1 Scope
This part of ISO 21183 describes the principal characteristics and applications of light conveyor belts. This
description is necessary either for limiting the validity of certain standards to light conveyor belts or for
excluding light conveyor belts from the validity of certain standards.
2 Description
2.1 Applications
2.1.1 General applications
Light conveyor belts are predominantly used for the indoor transport of unit loads (for example, parcels, boxes,
cans, containers, luggage, industrial goods of all kinds and foodstuffs).
In many cases, light conveyor belts are incorporated into a machine as an integral machine element. They are
then called machine belts (also known as machine tapes).
...

NORME ISO
INTERNATIONALE 21183-1
Première édition
2005-11-01


Courroies transporteuses légères —
Partie 1:
Caractéristiques et applications
principales
Light conveyor belts —
Part 1: Principal characteristics and applications




Numéro de référence
ISO 21183-1:2005(F)
©
ISO 2005

---------------------- Page: 1 ----------------------
ISO 21183-1:2005(F)
PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info
du fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir
l'exploitation de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation,
veuillez en informer le Secrétariat central à l'adresse donnée ci-dessous.


©  ISO 2005
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit
de l'ISO à l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax. + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse

ii © ISO 2005 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 21183-1:2005(F)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée
aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du
comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec
la Commission électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI,
Partie 2.
La tâche principale des comités techniques est d'élaborer les Normes internationales. Les projets de Normes
internationales adoptés par les comités techniques sont soumis aux comités membres pour vote. Leur
publication comme Normes internationales requiert l'approbation de 75 % au moins des comités membres
votants.
L'attention est appelée sur le fait que certains des éléments du présent document peuvent faire l'objet de
droits de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable de ne
pas avoir identifié de tels droits de propriété et averti de leur existence.
L'ISO 21183-1 a été élaborée par le comité technique ISO/TC 41, Poulies et courroies (y compris les
courroies trapézoïdales), sous-comité SC 3, Courroies transporteuses.
La présente partie de l'ISO 21183 est basée sur l'EN 873:1996, préparée par le CEN/TC 188.
L'ISO 21183 comprend les parties suivantes, présentées sous le titre général Courroies transporteuses
légères:
⎯ Partie 1: Caractéristiques et applications principales
⎯ Partie 2: Liste des termes équivalents

© ISO 2005 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
NORME INTERNATIONALE ISO 21183-1:2005(F)

Courroies transporteuses légères —
Partie 1:
Caractéristiques et applications principales
1 Domaine d'application
La présente partie de l'ISO 21183 décrit les caractéristiques et applications principales des courroies
transporteuses légères. Cette description est nécessaire pour limiter, d'une part l'application des normes aux
courroies transporteuses légères, d'autre part pour exclure les courroies transporteuses légères des autres
normes.
2 Description
2.1 Applications
2.1.1 Applications générales
Les courroies transporteuses légères sont surtout utilisées pour le transport intra-muros de charges unitaires
(par exemple colis, boîtes, bidons, conteneurs, bagages, produits industriels de toutes sortes et produits
alimentaires).
Dans bien des cas, les courroies transporteuses légères sont incorporées dans des machines comme un
élément en faisant partie intégrante. Elles sont alors appelées cordons ou sangles de machine. Dans cette
fonction, elles sont utilisées soit comme élément de convoyage seul, soit comme élément de transport qui
participe en outre à une action de fabrication ou de process. Dans ces applications, les
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.