Injection containers and accessories — Part 1: Injection vials made of glass tubing

This document specifies the form, dimensions and capacities of glass vials for injectable preparations. It also specifies the material from which such containers are made and the performance requirements of those containers. This document is applicable to colourless or amber glass containers made from borosilicate or soda-lime glass, made from glass tubing, whether internally surface-treated or not, and intended to be used in the packaging, storage or transportation of products intended for injection.

Récipients et accessoires pour produits injectables — Partie 1: Flacons en verre étiré

Le présent document spécifie la forme, les dimensions et les capacités des flacons en verre pour préparations injectables. Il spécifie également le matériau constitutif de ces flacons et les exigences de performance relatives à ces récipients. Le présent document est applicable aux récipients en verre blanc ou ambré, en verre borosilicaté ou en verre de silicate sodocalcique, obtenus à partir de verre étiré, avec une surface interne traitée ou non, conçus pour l'emballage, le stockage ou le transport des produits injectables.

General Information

Status
Published
Publication Date
01-Aug-2018
Current Stage
9060 - Close of review
Start Date
04-Mar-2029
Ref Project

Relations

Buy Standard

Standard
ISO 8362-1:2018 - Injection containers and accessories
English language
7 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 8362-1:2018 - Récipients et accessoires pour produits injectables
French language
7 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 8362-1
Fourth edition
2018-08
Injection containers and
accessories —
Part 1:
Injection vials made of glass tubing
Récipients et accessoires pour produits injectables —
Partie 1: Flacons en verre étiré
Reference number
ISO 8362-1:2018(E)
©
ISO 2018

---------------------- Page: 1 ----------------------
ISO 8362-1:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 8362-1:2018(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Dimensions . 1
5 Designation . 5
6 Material . 5
7 Performance . 6
8 Requirements . 6
8.1 Hydrolytic resistance . 6
8.2 Annealing quality . 6
9 Marking . 6
Bibliography . 7
© ISO 2018 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 8362-1:2018(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commissio
...

NORME ISO
INTERNATIONALE 8362-1
Quatrième édition
2018-08
Récipients et accessoires pour
produits injectables —
Partie 1:
Flacons en verre étiré
Injection containers and accessories —
Part 1: Injection vials made of glass tubing
Numéro de référence
ISO 8362-1:2018(F)
©
ISO 2018

---------------------- Page: 1 ----------------------
ISO 8362-1:2018(F)

DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2018
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: +41 22 749 01 11
Fax: +41 22 749 09 47
E-mail: copyright@iso.org
Web: www.iso.org
Publié en Suisse
ii © ISO 2018 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 8362-1:2018(F)

Sommaire Page
Avant-propos .iv
Introduction .v
1 Domaine d’application . 1
2 Références normatives . 1
3 Termes et définitions . 1
4 Dimensions . 1
5 Désignation . 5
6 Matériau . 6
7 Performance . 6
8 Exigences . 6
8.1 Résistance hydrolytique . 6
8.2 Qualité de recuit . 6
9 Marquage . 6
Bibliographie . 7
© ISO 2018 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
ISO 8362-1:2018(F)

Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes
nationaux de normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est
en général confiée aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude
a le droit de faire partie du comité technique créé à cet effet. Les organisations internationales,
gouvernementales et non gouvernementales, en liaison avec l'ISO participent également aux travaux.
L'ISO collabore étroitement avec la Commission électrotechni
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.