ISO 9838:2008
(Main)Alpine and touring ski-bindings — Test soles for ski-binding tests
Alpine and touring ski-bindings — Test soles for ski-binding tests
ISO 9838:2008 defines test soles representing an alpine ski-boot (form A), or at least the bottom part of it, to be used for testing alpine ski-bindings for alpine skiing in accordance with ISO 9462 and ISO 9465 and a touring ski-boot (form T), or at least the bottom part of it, to be used for testing touring ski-bindings for touring skiing in accordance with ISO 13992 and ISO 9465.
Fixations de skis alpins et de randonnée — Semelles d'essai pour les essais de fixations de skis
L'ISO 9838:2008 définit des semelles d'essai représentant une chaussure de ski alpin (forme A), ou au moins la partie inférieure de celle-ci, à utiliser pour les essais de fixations de skis alpins conformément à l'ISO 9462 et l'ISO 9465 et une chaussure de ski de randonnée (forme T), ou au moins la partie inférieure de celle-ci, à utiliser pour les essais de fixations de skis de randonnée conformément à l'ISO 13992 et l'ISO 9465.
Varnostne vezi za alpske smuči - Preskusni vložek za preskušanje varnostnih vezi
Ta mednarodni standard določa način predstavitve preskusnih vložkov – smučarskih čevljev za alpsko smučanje (oblike A) ali vsaj njihovega spodnjega dela, za uporabo za preskušanje varnostnih vezi za alpsko smučanje v skladu z ISO 9462 in ISO 9465 ter – smučarskih čevljev za turno smučanje za preskušanje varnostnih vezi za turno smučanje v skladu z ISO 13992 in ISO 9465.
General Information
Relations
Buy Standard
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 9838
Second edition
2008-12-15
Alpine and touring ski-bindings — Test
soles for ski-binding tests
Fixations de skis alpins et de randonnée — Semelles d'essai pour les
essais de fixations de skis
Reference number
ISO 9838:2008(E)
©
ISO 2008
---------------------- Page: 1 ----------------------
ISO 9838:2008(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
COPYRIGHT PROTECTED DOCUMENT
© ISO 2008
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2008 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 9838:2008(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 9838 was prepared by Technical Committee ISO/TC 83, Sports and recreational equipment,
Subcommittee SC 3, Ski bindings.
This second edition cancels and replaces the first edition (ISO 9838:1991), which has been technically revised.
© ISO 2008 – All rights reserved iii
---------------------- Page: 3 ----------------------
INTERNATIONAL STANDARD ISO 9838:2008(E)
Alpine and touring ski-bindings — Test soles for ski-binding
tests
1 Scope
This International Standard defines test soles representing
⎯ an alpine ski-boot (form A), or at least the bottom part of it, to be used for testing alpine ski-bindings for
alpine skiing in accordance with ISO 9462 and ISO 9465
and
⎯ a touring ski-boot (form T), or at least the bottom part of it, to be used for testing touring ski-bindings for
touring skiing in accordance with ISO 13992 and ISO 9465.
NOTE Ski-boots have their own International Standards (ISO 5355 and ISO 9523) that allow relatively large
tolerances in defining the test sole, which are generally believed to be suitable for on-slope use by skiers but too large for
reproducible laboratory measurements.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 868, Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore
hardness)
ISO 5355, Alpine ski-boots — Requirements and test methods
ISO 9462, Alpine ski-bindings — Requirements and test methods
ISO 9465, Alpine ski-bindings — Lateral release under impact loading — Test method
ISO 13992, Alpine touring ski-bindings — Requirements and test methods
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 5355 and the following apply.
3.1
test sole form A
test sole for testing alpine ski bindings
3.2
test sole form T
test sole for testing touring ski bindings
© ISO 2008 – All rights reserved 1
---------------------- Page: 4 ----------------------
ISO 9838:2008(E)
3.3
test sole type A
test sole for adults in accordance with ISO 5355, type A, suitable for bindings of type A (adults) and CA
(junior) in accordance with ISO 9462
3.4
test sole type C
test sole for children in accordance with ISO 5355, type C, suitable for bindings of type C (children) in
accordance w
...
SLOVENSKI STANDARD
SIST ISO 9838:2011
01-marec-2011
9DUQRVWQHYH]L]DDOSVNHVPXþL3UHVNXVQLYORåHN]DSUHVNXãDQMHYDUQRVWQLKYH]L
Alpine and touring ski-bindings - Test soles for ski-binding tests
Fixations de skis alpins et de randonnée - Semelles d'essai pour les essais de fixations
de skis
Ta slovenski standard je istoveten z: ISO 9838:2008
ICS:
97.220.20 Oprema za zimske športe Winter sports equipment
SIST ISO 9838:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST ISO 9838:2011
---------------------- Page: 2 ----------------------
SIST ISO 9838:2011
INTERNATIONAL ISO
STANDARD 9838
Second edition
2008-12-15
Alpine and touring ski-bindings — Test
soles for ski-binding tests
Fixations de skis alpins et de randonnée — Semelles d'essai pour les
essais de fixations de skis
Reference number
ISO 9838:2008(E)
©
ISO 2008
---------------------- Page: 3 ----------------------
SIST ISO 9838:2011
ISO 9838:2008(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
COPYRIGHT PROTECTED DOCUMENT
© ISO 2008
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2008 – All rights reserved
---------------------- Page: 4 ----------------------
SIST ISO 9838:2011
ISO 9838:2008(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 9838 was prepared by Technical Committee ISO/TC 83, Sports and recreational equipment,
Subcommittee SC 3, Ski bindings.
This second edition cancels and replaces the first edition (ISO 9838:1991), which has been technically revised.
© ISO 2008 – All rights reserved iii
---------------------- Page: 5 ----------------------
SIST ISO 9838:2011
---------------------- Page: 6 ----------------------
SIST ISO 9838:2011
INTERNATIONAL STANDARD ISO 9838:2008(E)
Alpine and touring ski-bindings — Test soles for ski-binding
tests
1 Scope
This International Standard defines test soles representing
⎯ an alpine ski-boot (form A), or at least the bottom part of it, to be used for testing alpine ski-bindings for
alpine skiing in accordance with ISO 9462 and ISO 9465
and
⎯ a touring ski-boot (form T), or at least the bottom part of it, to be used for testing touring ski-bindings for
touring skiing in accordance with ISO 13992 and ISO 9465.
NOTE Ski-boots have their own International Standards (ISO 5355 and ISO 9523) that allow relatively large
tolerances in defining the test sole, which are generally believed to be suitable for on-slope use by skiers but too large for
reproducible laboratory measurements.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 868, Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore
hardness)
ISO 5355, Alpine ski-boots — Requirements and test methods
ISO 9462, Alpine ski-bindings — Requirements and test methods
ISO 9465, Alpine ski-bindings — Lateral release under impact loading — Test method
ISO 13992, Alpine touring ski-bindings — Requirements and test methods
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 5355 and the following apply.
3.1
test sole form A
test sole for testing alpine ski bindings
3.2
test sole form T
test sole for testing touring ski bindings
© ISO 200
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Fixations de skis alpins et de randonnée - Semelles d'essai pour les essais de fixations de skisAlpine and touring ski-bindings - Test soles for ski-binding tests97.220.20Oprema za zimske športeWinter sports equipmentICS:Ta slovenski standard je istoveten z:ISO 9838:2008oSIST ISO 9838:2011en01-januar-2011oSIST ISO 9838:2011SLOVENSKI
STANDARD
oSIST ISO 9838:2011
Reference numberISO 9838:2008(E)© ISO 2008
INTERNATIONAL STANDARD ISO9838Second edition2008-12-15Alpine and touring ski-bindings — Test soles for ski-binding tests Fixations de skis alpins et de randonnée — Semelles d'essai pour les essais de fixations de skis
oSIST ISO 9838:2011
ISO 9838:2008(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
COPYRIGHT PROTECTED DOCUMENT
©
ISO 2008 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
copyright@iso.org Web
www.iso.org Published in Switzerland
ii © ISO 2008 – All rights reserved
oSIST ISO 9838:2011
ISO 9838:2008(E) © ISO 2008 – All rights reserved iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 9838 was prepared by Technical Committee ISO/TC 83, Sports and recreational equipment, Subcommittee SC 3, Ski bindings. This second edition cancels and replaces the first edition (ISO 9838:1991), which has been technically revised. oSIST ISO 9838:2011
oSIST ISO 9838:2011
INTERNATIONAL STANDARD ISO 9838:2008(E) © ISO 2008 – All rights reserved 1 Alpine and touring ski-bindings — Test soles for ski-binding tests 1 Scope This International Standard defines test soles representing ⎯ an alpine ski-boot (form A), or at least the bottom part of it, to be used for testing alpine ski-bindings for alpine skiing in accordance with ISO 9462 and ISO 9465 and ⎯ a touring ski-boot (form T), or at least the bottom part of it, to be used for testing touring ski-bindings for touring skiing in accordance with ISO 13992 and ISO 9465. NOTE Ski-boots have their own International Standards (ISO 5355 and ISO 9523) that allow relatively large tolerances in defining the test sole, which are generally believed to be suitable for on-slope use by skiers but too large for reproducible laboratory measurements. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 868, Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) ISO 5355, Alpine ski-boots — Requirements and test methods ISO 9462, Alpine ski-bindings — Requirements and test methods ISO 9465, Alpine ski-bindings — Lateral release under impact loading — Test method ISO 13992, Alpine touring ski-bindings — Requirements and test methods 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 5355 and the following apply. 3.1 test sole form A test sole for testing alpine ski bindings 3
...
NORME ISO
INTERNATIONALE 9838
Deuxième édition
2008-12-15
Fixations de skis alpins et de
randonnée — Semelles d'essai pour les
essais de fixations de skis
Alpine and touring ski-bindings — Test soles for ski-binding tests
Numéro de référence
ISO 9838:2008(F)
©
ISO 2008
---------------------- Page: 1 ----------------------
ISO 9838:2008(F)
PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info
du fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir
l'exploitation de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation,
veuillez en informer le Secrétariat central à l'adresse donnée ci-dessous.
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2008
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit
de l'ISO à l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse
ii © ISO 2008 – Tous droits réservés
---------------------- Page: 2 ----------------------
ISO 9838:2008(F)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée
aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du
comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec
la Commission électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI,
Partie 2.
La tâche principale des comités techniques est d'élaborer les Normes internationales. Les projets de Normes
internationales adoptés par les comités techniques sont soumis aux comités membres pour vote. Leur
publication comme Normes internationales requiert l'approbation de 75 % au moins des comités membres
votants.
L'attention est appelée sur le fait que certains des éléments du présent document peuvent faire l'objet de
droits de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable de ne
pas avoir identifié de tels droits de propriété et averti de leur existence.
L'ISO 9838 a été élaborée par le comité technique ISO/TC 83, Matériel de sports et d'activités de plein air,
sous-comité SC 3, Fixations de ski.
Cette deuxième édition annule et remplace la première édition (ISO 9838:1991), qui a fait l'objet d'une
révision technique.
© ISO 2008 – Tous droits réservés iii
---------------------- Page: 3 ----------------------
NORME INTERNATIONALE ISO 9838:2008(F)
Fixations de skis alpins et de randonnée — Semelles d'essai
pour les essais de fixations de skis
1 Domaine d'application
La présente Norme internationale définit des semelles d'essai représentant
⎯ une chaussure de ski alpin (forme A), ou au moins la partie inférieure de celle-ci, à utiliser pour les essais
de fixations de skis alpins conformément à l'ISO 9462 et l'ISO 9465, et
⎯ une chaussure de ski de randonnée (forme T), ou au moins la partie inférieure de celle-ci, à utiliser pour
les essais de fixations de skis de randonnée conformément à l'ISO 13992 et l'ISO 9465.
NOTE Les chaussures de ski font l'objet de Normes internationales spécifiques (ISO 5355 et ISO 9523), qui
admettent des tolérances relativement importantes pour la définition de la semelle d'essai. Ces tolérances sont
généralement estimées correctes pour l'utilisation sur piste par les skieurs, mais s'avèrent trop importantes pour réaliser
des mesurages de laboratoire reproductibles.
2 Références normatives
Les documents de référence suivants sont indispensables pour l'application du présent document. Pour les
références datées, seule l'édition citée s'applique. Pour les références non datées, la dernière édition du
document de référence s'applique (y compris les éventuels amendements).
ISO 868, Plastiques et ébonite — Détermination de la dureté par pénétration au moyen d'un duromètre
(dureté Shore)
ISO 5355, Chaussures de ski pour skis alpins — Exigences et méthodes d'essai
ISO 9462, Fixations de skis alpins — Exigences et méthodes d'essai
ISO 9465, Fixations de skis alpins — Déclenchement latéral sous choc — Méthode d'essai
ISO 13992, Fixations pour le ski alpin de randonnée — Exigences et méthodes d'essai
3 Termes et définitions
Pour les besoins du présent document, les termes et définitions donnés dans l'ISO 5355 ainsi que les
suivants s'appliquent.
3.1
semelle d'essai forme A
semelle d'essai utilisable pour les fixations de ski alpin
3.2
semelle d'essai forme T
semelle d'essai utilisable pour les fixations de ski de randonnée
© ISO 2008 – Tous droits réservés 1
---------------------- Page: 4 ----------------------
ISO 9838:2008(F)
3.3
semelle d'essai type A
semelle d'essai pour adultes conforme à l'ISO 5355, type A, utilisable pour les fixations de types A (adultes)
et CA (adolescents) conformément à l'ISO 9462
3.4
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.