Displacement compressors — Acceptance tests — Amendment 1: Calculation of isentropic efficiency and relationship with specific energy

Compresseurs volumétriques — Essais de réception — Amendement 1: Calcul du rendement isentropique et relation avec l'énergie spécifique

General Information

Status
Published
Publication Date
06-Apr-2016
Current Stage
6060 - International Standard published
Due Date
27-Oct-2017
Completion Date
07-Apr-2016
Ref Project

Relations

Buy Standard

Standard
ISO 1217:2009/Amd 1:2016 - Calculation of isentropic efficiency and relationship with specific energy
English language
5 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 1217:2009/Amd 1:2016 - Calculation of isentropic efficiency and relationship with specific energy
English language
5 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 1217:2009/Amd 1:2016 - Calcul du rendement isentropique et relation avec l'énergie spécifique
French language
6 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 1217:2009/Amd 1:2016 - Calcul du rendement isentropique et relation avec l'énergie spécifique
French language
6 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 1217
Fourth edition
2009-07-01
AMENDMENT 1
2016-04-15
Displacement compressors —
Acceptance tests
AMENDMENT 1: Calculation of
isentropic efficiency and relationship
with specific energy
Compresseurs volumétriques — Essais de réception
AMENDEMENT 1: Calcul du rendement isentropique et relation avec
l’énergie spécifique
Reference number
ISO 1217:2009/Amd.1:2016(E)
©
ISO 2016

---------------------- Page: 1 ----------------------
ISO 1217:2009/Amd.1:2016(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 1217:2009/Amd.1:2016(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical
Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information
Amendment 1 to ISO 1217:2009 was prepared by Technical Committee ISO/TC 118, Compressors and
pneumatic tools, machines and equipment, Subcommittee SC 6, Air compressors and compressed air
systems.
© ISO 2016 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 1217:2009/Amd.1:2016(E)
Displacement compressors — Acceptance tests
AMENDMENT 1: Calculation of isentropic efficiency and
relationship with specific energy
Page 6, 3.5.1
Replace the term and definition with the following:
isentropic power
power that is theoretically required to compress an ideal gas under constant entropy, from given inlet
conditions to a given discharge pressure
Note 1 to entry The term “ideal gas” is used to indicate any gas in a condition or state so that it follows closely
the ideal gas law.
Page 6, 3.6.1
Replace the term and definition with the following:
isentropic efficiency
ratio of the required isentropic power to measured power for the same specified boundaries with the
same gas and the same inlet conditions and outlet pressure
P
isen
η =
isen
P
real
Note 1 to entry Examples of specified boundaries may be shaft power of bare compressor or motor power of the
package including inlet and discharge losses or total input power of the package.
Note 2 to entry In many turbo compressor textbooks, the adiabatic stage gas power Ph=Δ ⋅=qh −hq⋅
()
im 21 m
P Δh
isen isen
is taken as P . Isentropic efficiency is then defined as η = = . In this special case, the most
real
isen
Δ⋅hq Δh
m
narrow boundaries are used which are enclosing only the gas volume. In this sense, it corresponds with the
formula for isentropic efficiency given in ISO 5389:2005, Formula (E.101).
© ISO 2016 – All rights reserved 1

---------------------- Page: 4 ----------------------
ISO 1217:2009/Amd.1:2016(E)

Page 64, Annex G
Add a new Annex H as follows.
Annex H
(informative)

Isentropic efficiency and its relation to specific energy requirement
H.1 General
This annex provides general derivation of isentropic power and calculations for the relationship
between isentropic efficiency as defined in this annex and specific energy requirement in accordance
with this International Standard.
No additional data or measurements are required for the calculation of isentropic power and isentropic
efficiency.
This annex also provides calculations for the relative tolerances between specific power and isentropic
efficiency.
H.2 Symbols and subscripts
Table H.1 — Symbols
Symbol Term SI unit Other practical units
c specific heat at constant pressure J/(kg∙K) —
p
h specific enthalpy J/kg kJ/kg
Δh specific enthalpy difference J/kg kJ/kg
P power W MW, kW
p pressure Pa MPa, bar, mbar
Δp pressure difference Pa MPa, bar, mbar
R gas constant J/(kg∙K)
T absolute temperature K
q mass rate of flow kg/s kg/h
m
3 3 3
q volume flow rate m /s m /h, m /min, L/s
V
−1
K isentropic exponent (ratio of specific heats) min
L lower limit
η
...

DRAFT AMENDMENT
ISO 1217:2009/DAM 1
ISO/TC 118/SC 6 Secretariat: SIS
Voting begins on:  Voting terminates on:
2015-09-15 2015-12-15
Displacement compressors — Acceptance tests
AMENDMENT 1: Calculation of isentropic efficiency and
relationship with specific energy
Compresseurs volumétriques — Essais de réception
AMENDEMENT 1: .
ICS: 23.140
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 1217:2009/DAM 1:2015(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2015

---------------------- Page: 1 ----------------------
ISO 1217:2009/DAM 1:2015(E)
ISO 1217:2009/PDAM 1

Copyright notice
This ISO document is a working draft or committee draft and is copyright-protected by ISO. While the
reproduction of working drafts or committee drafts in any form for use by participants in the ISO standards
development process is permitted without prior permission from ISO, neither this document nor any extract
from it may be reproduced, stored or transmitted in any form for any other purpose without prior written
permission from ISO.
Requests for permission to reproduce this document for the purpose of selling it should be addressed as
shown below or to ISO's member body in the country of the requester:
[Indicate the full address, telephone number, fax number, telex number, and electronic mail address, as
appropriate, of the Copyright Manager of the ISO member body responsible for the secretariat of the TC or
SC within the framework of which the working document has been prepared.]
Reproduction for sales purposes may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
COPYRIGHT PROTECTED DOCUMENT
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
© ISO 2015 – All rights reserved
1
ii © ISO 2015 – All rights reserved

---------------------- Page: 2 ----------------------
Contents Page
Foreword .3
Introduction .4
Annex H (informative) Isentropic efficiency and its relation to specific energy requirement .5
H.1 Scope .5
H.2 Terms and definitions .5
H.3 Symbols and subscripts .6
H.4 Derivation of isentropic power .6
H.5 Relationship between isentropic efficiency and specific energy requirement .7
H.6 Tolerances .7

© ISO 2015 – All rights reserved
2

---------------------- Page: 3 ----------------------
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
Amendment 1 to ISO 1217:2009 was prepared by Technical Committee ISO/TC 118, Compressors and
pneumatic tools, machines and equipment, Subcommittee SC 6, Air compressors and compressed air
systems.
© ISO 2015 – All rights reserved
3

---------------------- Page: 4 ----------------------
Introduction
Compressor performance can be expressed and compared in different ways. The most simple and precise but
limited method is to compare the power requirement of different compressors fulfilling the same compression
task at the same inlet conditions. If part load volume flow rates at constant outlet pressure and constant inlet
conditions have to be considered as well, the use of specific power requirement (also denoted as specific
energy requirement SER) is quite common, mainly in the area of standard air (industrial compressed air,
compressors with atmospheric inlet, air in contact with oil) where constant outlet pressure is typical. Outside
the area of standard air the application of isentropic efficiency to express performance is widely used.
Isentropic efficiency is an additional, widespread measure to judge the quality of thermodynamic processes,
e.g. compression. It is a dimensionless number and will typically have values between 0 and 1 (0% and
100%), which eases assessment of compressor performance.
The need for a definition of the boundaries for the measurement of P is always present, regardless if
real
specific energy requirement or isentropic efficiency is to be calculated.
© ISO 2015 – All rights reserved
4

---------------------- Page: 5 ----------------------
Annex H
(informative)
Isentropic efficiency and its relation to specific energy requirement
(When a
...

NORME ISO
INTERNATIONALE 1217
Quatrième édition
2009-07-01
AMENDEMENT 1
2016-04-15
Compresseurs volumétriques —
Essais de réception
AMENDEMENT 1: Calcul du rendement
isentropique et relation avec l’énergie
spécifique
Displacement compressors — Acceptance tests
AMENDMENT 1: Calculation of isentropic efficiency and relationship
with specific energy
Numéro de référence
ISO 1217:2009/Amd.1:2016(F)
©
ISO 2016

---------------------- Page: 1 ----------------------
ISO 1217:2009/Amd.1:2016(F)

DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2016, Publié en Suisse
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni utilisée
sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie, l’affichage sur
l’internet ou sur un Intranet, sans autorisation écrite préalable. Les demandes d’autorisation peuvent être adressées à l’ISO à
l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 1217:2009/Amd.1:2016(F)

Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale d’organismes
nationaux de normalisation (comités membres de l’ISO). L’élaboration des Normes internationales est
en général confiée aux comités techniques de l’ISO. Chaque comité membre intéressé par une étude
a le droit de faire partie du comité technique créé à cet effet. Les organisations internationales,
gouvernementales et non gouvernementales, en liaison avec l’ISO participent également aux travaux.
L’ISO collabore étroitement avec la Commission électrotechnique internationale (IEC) en ce qui
concerne la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier de prendre note des différents
critères d’approbation requis pour les différents types de documents ISO. Le présent document a été
rédigé conformément aux règles de rédaction données dans les Directives ISO/IEC, Partie 2 (voir www.
iso.org/directives).
L’attention est appelée sur le fait que certains des éléments du présent document peuvent faire l’objet de
droits de propriété intellectuelle ou de droits analogues. L’ISO ne saurait être tenue pour responsable
de ne pas avoir identifié de tels droits de propriété et averti de leur existence. Les détails concernant
les références aux droits de propriété intellectuelle ou autres droits analogues identifiés lors de
l’élaboration du document sont indiqués dans l’Introduction et/ou dans la liste des déclarations de
brevets reçues par l’ISO (voir www.iso.org/brevets).
Les appellations commerciales éventuellement mentionnées dans le présent document sont données
pour information, par souci de commodité, à l’intention des utilisateurs et ne sauraient constituer un
engagement.
Pour une explication de la signification des termes et expressions spécifiques de l’ISO liés à
l’évaluation de la conformité, ou pour toute information au sujet de l’adhésion de l’ISO aux principes
de l’OMC concernant les obstacles techniques au commerce (OTC), voir le lien suivant: Avant-propos —
Informations supplémentaires.
L’Amendement 1 à l’ISO 1217:2015 a été élaboré par le comité technique ISO/TC 118, Compresseurs,
machines  portatives  pneumatiques,  machines  et  équipements  pneumatiques, sous-comité SC 6,
Compresseurs à air et systèmes à air comprimé.
© ISO 2016 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
ISO 1217:2009/Amd.1:2016(F)
Compresseurs volumétriques — Essais de réception
AMENDEMENT 1: Calcul du rendement isentropique et relation
avec l’énergie spécifique
Page 6, 3.5.1
Remplacer le terme et la définition par les suivants:
puissance isentropique
puissance théoriquement requise pour comprimer un gaz parfait sous entropie constante, depuis une
condition d’aspiration donnée jusqu’à une pression de refoulement donnée
Note 1 à l’article Le terme “gaz parfait” est utilisé pour indiquer tout gaz dans une condition ou un état qui suit de
près la loi des gaz parfaits.
Page 6, 3.6.1
Remplacer le terme et la définition par les suivants:
rendement isentropique
rapport entre la puissance isentropique requise et la puissance mesurée pour les mêmes limites
spécifiées avec le même gaz et les mêmes condition d’aspiration et de pression de sortie
P
isen
η =
isen
P
real
Note 1 à l’article Des exemples de limites spécifiées peuvent être la puissance à l’arbre d’un compresseur nu ou la
puissance du moteur d’un groupe comprenant les pertes à l’aspiration et au refoulement ou la puissance absorbée
totale du groupe.
Note 2 à l’article Dans de nombreux manuels de turbocompresseur, la puissance du gaz à l’état adiabatique
Ph=Δ ⋅=qh −hq⋅ est pris en tant que P . Le rendement isentropique est alors défini comme
() real
im 21 m
P Δh
isen isen
η = = . Dans ce cas spécifique, les limites les plus étroites sont utilisées comprenant
isen
Δ⋅hq Δh
m
uniquement le volume de gaz. En ce sens, elle correspond à la formule pour le rendement isentropique donnée
dans l’ISO 5389:2005, Formule (E.101).
© ISO 2016 – Tous droits réservés 1

---------------------- Page: 4 ----------------------
ISO 1217:2009/Amd.1:2016(F)

Page 64, Annexe G
Ajouter une nouvelle Annexe H comme suit:
Annexe H
(informative)

Rendement isentropique et sa relation avec l’exigence d’énergie spécifique
H.1  Généralité
La présente annexe fournit une approche générale de la puissance isentropique et les calculs pour faire
la relation entre le rendement isentropique tel que défini dans la présente annexe et l’exigence d’énergie
spécifique conformément à la présente Norme internationale.
Aucune donnée ou mesures additionnelles sont requises pour le calcul de la puissance isentropique et
du rendement isentropique.
La présente annexe fournit également les calculs pour la tolérance relative entre la puissance spécifique
et le rendement isentropique.
H.2  Symboles et indices
Tableau H.1 — Symboles
Symbole Terme Unité SI Autres unités pratiques
c chaleur spécifique à pression constante J/(kg∙K) -
p
h enthalpie spécifique J/kg kJ/kg
Δh Différence d’enthalpie spécifique J/kg kJ/kg
P puissance W MW, kW
p pression Pa MPa, bar, mbar
Δp Différence de pression Pa Mpa, bar, mbar
R Constante du gaz J/(kg∙K)
T température absolue K
q débit massique kg/s kg/h
m
3 3 3
q débit volumique m /s m /h, m /min, L/s
V
exposan
...

PROJET D’AMENDEMENT
ISO 1217:2009/DAM 1
ISO/TC 118/SC 6 Secrétariat: SIS
Début de vote: Vote clos le:
2015-09-15 2015-12-15
Compresseurs volumétriques — Essais de réception
AMENDEMENT 1
Displacement compressors — Acceptance tests
AMENDMENT 1: Calculation of isentropic efficiency and relationship with specific energy
ICS: 23.140
CE DOCUMENT EST UN PROJET DIFFUSÉ POUR
OBSERVATIONS ET APPROBATION. IL EST DONC
SUSCEPTIBLE DE MODIFICATION ET NE PEUT
ÊTRE CITÉ COMME NORME INTERNATIONALE
AVANT SA PUBLICATION EN TANT QUE TELLE.
OUTRE LE FAIT D’ÊTRE EXAMINÉS POUR
ÉTABLIR S’ILS SONT ACCEPTABLES À DES
FINS INDUSTRIELLES, TECHNOLOGIQUES ET
COMMERCIALES, AINSI QUE DU POINT DE VUE
DES UTILISATEURS, LES PROJETS DE NORMES
INTERNATIONALES DOIVENT PARFOIS ÊTRE
CONSIDÉRÉS DU POINT DE VUE DE LEUR
POSSIBILITÉ DE DEVENIR DES NORMES
POUVANT SERVIR DE RÉFÉRENCE DANS LA
RÉGLEMENTATION NATIONALE.
Numéro de référence
LES DESTINATAIRES DU PRÉSENT PROJET
ISO 1217:2009/DAM 1:2015(F)
SONT INVITÉS À PRÉSENTER, AVEC LEURS
OBSERVATIONS, NOTIFICATION DES DROITS
DE PROPRIÉTÉ DONT ILS AURAIENT
ÉVENTUELLEMENT CONNAISSANCE ET À
©
FOURNIR UNE DOCUMENTATION EXPLICATIVE. ISO 2015

---------------------- Page: 1 ----------------------
ISO 1217:2009/DAM 1:2015(F) ISO 1217:2015/DAM 1

Sommaire Page
Avant-propos . iv
Introduction . v
Annexe H (informative) Rendement isentropique et sa relation avec l'exigence d'énergie
spécifique . 1
H.1 Domaine d'application . 1
H.2 Termes et définitions . 1
H.3 Symboles et indices. 2
H.4 Dérivation de la puissance isentropique . 2
H.5 Relation entre le rendement isentropique et l'exigence spécifique d'énergie . 3
H.6 Tolérances . 3

DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2015
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni utilisée
sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie, l’affichage sur
l’internet ou sur un Intranet, sans autorisation écrite préalable. Les demandes d’autorisation peuvent être adressées à l’ISO à
l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse
iii
© ISO 2015 – Tous droits réservés
ii © ISO 2015 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 1217:2015/DAM 1
Sommaire Page
Avant-propos . iv
Introduction . v
Annexe H (informative) Rendement isentropique et sa relation avec l'exigence d'énergie
spécifique . 1
H.1 Domaine d'application . 1
H.2 Termes et définitions . 1
H.3 Symboles et indices . 2
H.4 Dérivation de la puissance isentropique . 2
H.5 Relation entre le rendement isentropique et l'exigence spécifique d'énergie . 3
H.6 Tolérances . 3

© ISO 2015 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
ISO 1217:2015/DAM 1
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée
aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du
comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec
la Commission électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/IEC,
Partie 2.
La tâche principale des comités techniques est d'élaborer les Normes internationales. Les projets de Normes
internationales adoptés par les comités techniques sont soumis aux comités membres pour vote. Leur
publication comme Normes internationales requiert l'approbation de 75 % au moins des comités membres
votants.
L'attention est appelée sur le fait que certains des éléments du présent document peuvent faire l'objet de
droits de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable de ne
pas avoir identifié de tels droits de propriété et averti de leur existence.
L'Amendement 1 à l'ISO 1217:2015 a été élaboré par le comité technique ISO/TC 118, Compresseurs,
machines portatives pneumatiques, machines et équipements pneumatiques, sous-comité SC 6,
Compresseurs à air et systèmes à air comprimé.
iv © ISO 2015 – Tous droits réservés

---------------------- Page: 4 ----------------------
ISO 1217:2015/DAM 1
Introduction
La performance des compresseurs peut être exprimée et comparée de différentes manières. La méthode la
plus simple et précise, mais limitée, est de comparer l’exigence de puissance de différents compresseurs
remplissant une tâche de compression similaire, aux mêmes conditions d’entrée. Si la partie du débit à charge
à une pression de sortie constante et à conditions d’entrée constantes sont à prendre en considération,
l’utilisation d’une exigence de puissance spécifique (aussi désignée exigence spécifique d’énergie SER) est
très répandue, principalement dans le domaine de l’air (air comprimé industriel, compresseurs avec entrée
atmosphérique, air en contact avec l’huile) où la pression de sortie constante est typique. En dehors du
domaine de l’air, l’application du rendement isentropique est largement utilisée.
Le rendement isentropique est une mesure additionnelle répandue pour juger de la qualité des procédés
thermodynamiques, pa
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.