ISO 56008

Innovation management — Tools and methods for innovation operation measurements — Guidance

Management de l’innovation — Outils et méthodes pour les mesures des opérations d’innovation — Recommandations

Upravljanje inovativnosti – Orodja in metode za merjenje inovacijskega procesa – Napotki

General Information

• Status: Not Published
• ICS: 03.100.01 - Company organization and management in general
• ICS: 03.100.40 - Research and development
• Technical Committee: ISO/TC 279 - Innovation management
• Drafting Committee: ISO/TC 279/WG 3 - Tools and methods
• Current Stage: 6000 - International Standard under publication
• Completion Date: 26-Mar-2024
• Ref Project: kSIST ISO/FDIS 56008:2024 - Innovation management - Tools and methods for innovation operation measurements - Guidance

Relations

• Consolidates: IEC 80001-1:2021 - Application of risk management for IT-networks incorporating medical devices — Part 1: Safety, effectiveness and security in the implementation and use of connected medical devices or connected health software
• Effective Date: 06-Jun-2022

Standards Content (Sample)

FINAL DRAFT
International
Standard
ISO/FDIS 56008
ISO/TC 279
Innovation management — Tools
Secretariat: AFNOR
and methods for innovation
Voting begins on:
operation measurements —
2024-01-29
Guidance
Voting terminates on:
2024-03-25
Management de l’innovation — Outils et méthodes pour les
mesures des opérations d’innovation — Recommandations
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
ISO/CEN PARALLEL PROCESSING LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
Reference number
ISO/FDIS 56008:2024(en) © ISO 2024

---------------------- Page: 1 ----------------------
FINAL DRAFT
ISO/FDIS 56008:2024(en)
International
Standard
ISO/FDIS 56008
ISO/TC 279
Innovation management — Tools
Secretariat: AFNOR
and methods for innovation
Voting begins on:
operation measurements —
Guidance
Voting terminates on:
Management de l’innovation — Outils et méthodes pour les
mesures des opérations d’innovation — Recommandations
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
COPYRIGHT PROTECTED DOCUMENT
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
© ISO 2024
IN ADDITION TO THEIR EVALUATION AS
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
ISO/CEN PARALLEL PROCESSING
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
or ISO’s member body in the country of the requester.
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland Reference number
ISO/FDIS 56008:2024(en) © ISO 2024

© ISO 2024 – All rights reserved
ii

---------------------- Page: 2 ----------------------
ISO/FDIS 56008:2024(en)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Fundamentals of innovation operation measurements . 4
4.1 Principles of innovation management and innovation operation measurements .4
4.2 Innovation operation measurements process .5
4.3 Innovation operation measurement framework, indicators and metrics .6
4.3.1 General .6
4.3.2 Frameworks for innovation operation measurements .6
4.3.3 Innovation indicators .7
4.3.4 Innovation
...

ISO/FDIS 56008:2023(E)
SO ISO/TC 279/WG 3
Date: 2023-10-25
Secretariat: AFNOR
Date: 2024-01-11
Innovation management - — Tools and methods for innovation
operation measurements -— Guidance
Management de l’innovation — Outils et méthodes pour les mesures des opérations d’innovation —
Recommandations
FDIS stage

---------------------- Page: 1 ----------------------
ISO/DISFDIS 56008:20232024(E)
© ISO 20232024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this
publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical,
including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can
be requested from either ISO at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
EmailE-mail: [e-mail]
Website: www.iso.orgwww.iso.org
Published in Switzerland
ii © ISO 2023 – All rights reserved
© ISO 2024 – All rights reserved

ii

---------------------- Page: 2 ----------------------
ISO/DISFDIS 56008:20232024(E)

© ISO 2023 – All rights reserved iii
© ISO 2024 – All rights reserved

iii

---------------------- Page: 3 ----------------------
ISO/DISFDIS 56008:20232024(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO document should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of
(a) patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed
patent rights in respect thereof. As of the date of publication of this document, ISO had not received notice
of (a) patent(s) which may be required to implement this document. However, implementers are
cautioned that this may not represent the latest information, which may be obtained from the patent
database available at www.iso.org/patents.www.iso.org/patents. ISO shall not be held responsible for
identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the World
Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.htmlwww.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 279, Innovation management, in
collaboration with the European Committee for Standardization (CEN) Technical Committee CEN/TC
389, Innovation management, in accordance with the Agreement on technical cooperation between ISO
and CEN (Vienna Agreement).
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
Field Code Changed
iv © ISO 2023 – All rights reserved
© ISO 2024 – All rights reserved

iv

---------------------- Page: 4 ----------------------
ISO/DISFDIS 56008:20232024(E)
0. Introduction
0.1 Why innovation operation measurements are critical for success
An organization’s ability to innovate is recognized as a key factor for sustainability, competitiveness,
economic success, increased well-being, and the development of society. However, one cannot
understand and manage innovation operations without measuring them.
This document guides organizations on the design and implementation of measurements in managing
their innovation operations. This document helps organizations think, design, implement, measure and
take actions based on measurement results. It provides examples of innovation operation measurements,
indicators and metrics, but does not prescribe any specific ones. It is a guidance standard applicable
...