Conveyor belts — Determination of minimum transition distance on three idler rollers

ISO 5293:2004 specifies the formula for calculating conveyor belt transition distances and details its application and derivation. ISO 5293:2004 is not suitable or valid for light conveyor belts.

Courroies transporteuses — Détermination de la distance minimale de transition d'auge à trois rouleaux égaux

L'ISO 5293:2004 spécifie la formule de calcul des distances de transition d'auge des courroies transporteuses et expose en détail son application et sa détermination. L'ISO 5293:2004 n'est pas adaptée ou valable pour les courroies transporteuses légères.

Naprave za kontinuirni transport - Trakovi tračnih transporterjev - Ugotavljanje prehodne razdalje iz tridelne koritaste oblike v ravno obliko traku

Ta mednarodni standard določa formulo za izračun prehodnih razdalj trakov tračnih transporterjev ter opisuje njeno uporabo in izpeljavo. Ta mednarodni standard se ne uporablja oziroma ni veljaven za lahke trakove tračnih transporterjev iz standarda ISO 21183-1.

General Information

Status
Published
Publication Date
20-Sep-2004
Current Stage
9093 - International Standard confirmed
Completion Date
20-Jun-2019

Relations

Buy Standard

Standard
ISO 5293:2004 - Conveyor belts -- Determination of minimum transition distance on three idler rollers
English language
11 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 5293:2012
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ISO 5293:2004 - Courroies transporteuses -- Détermination de la distance minimale de transition d'auge a trois rouleaux égaux
French language
11 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 5293
Second edition
2004-09-15

Conveyor belts — Determination of
minimum transition distance on three
idler rollers
Courroies transporteuses — Détermination de la distance minimale de
transition d'auge à trois rouleaux égaux




Reference number
ISO 5293:2004(E)
©
ISO 2004

---------------------- Page: 1 ----------------------
ISO 5293:2004(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2004
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2004 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 5293:2004(E)
Contents Page
Foreword. iv
1 Scope. 1
2 Normative references . 1
3 Calculation of minimum transition distance .1
4 Application of the formula for transition distance . 2
4.1 General. 2
4.2 Values of elastic modulus, M, of belt . 2
4.3 Values of vertical distance, h, which the belt edge raises or lowers. 2
4.4 Values of ∆T . 4
Annex A (normative) Derivation of the formula for transition distance. 6
Annex B (normative) Derivation of values of ∆T . 8
Bibliography . 11

© ISO 2004 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 5293:2004(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 5293 was prepared by Technical Committee ISO/TC 41, Pulleys and belts (including veebelts),
Subcommittee SC 3, Conveyor belts.
This second edition cancels and replaces ISO 5293:1981 and ISO/TR 10357:1989, which have been
technically revised.

iv © ISO 2004 – All rights reserved

---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD ISO 5293:2004(E)

Conveyor belts — Determination of minimum transition
distance on three idler rollers
1 Scope
This International Standard specifies the formula for calculating conveyor belt transition distances and details
its application and derivation.
[1]
This International Standard is not suitable or valid for light conveyor belts as described in ISO 21183-1 .
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 1537, Continuous mechanical handling equipment for loose bulk materials — Troughed belt conveyors
(other than portable conveyors) — Idlers
ISO 9856, Conveyor belts — Determination of elastic and permanent elongation and calculation of elastic
modulus
3 Calculation of minimum transition distance
The formula for calculating the transition distance, the derivation of which is given in Annex A, is as follows:
0,5
hM

L=−()1cosλ
1

sinλ ∆T

where
L is the transition distance, expressed in metres;
1
h is the vertical distance, expressed in metres, the belt edge raises or lowers in the transition
(see Figure 1);
λ is the idler trough angle;
M is the elastic modulus, expressed in newtons per millimetre, measured under tension T ;
R
T is the maximum recommended belt-to-belt joint tension (RMBT), expressed in newtons per
R
millimetre, for a steady-state condition of the conveyor;
∆T is the induced belt edge stress, expressed in newtons per millimetre, in the transition.
© ISO 2004 – All rights reserved 1

---------------------- Page: 5 ----------------------
ISO 5293:2004(E)

Figure 1 — Transition distance
4 Application of the formula for transition distance
4.1 General
Calculate the transition distance by using appropriate values of M, h and ∆T as described in 4.2 to 4.4, as
appropriate.
4.2 Values of elastic modulus, M, of belt
Determine the values in accordance with ISO 9856.
4.3 Values of vertical distance, h, which the belt edge raises or lowers
4.3.1 General
Calculate the values from the idler trough angle λ (see Figure 1) and the position of the terminal pulley with
respect to the centre idler roller. Four common situations are described in 4.3.2 and 4.3.3.
4.3.2 Three equal length roller
4.3.2.1 The pulley is on a line with the top centre idler roller (see Figure 2).
bsinλ
h=
3
where
h is the vertical distance, expressed in metres, that the belt edge raises or lowers in the transition
(see Figure 1);
b is the width, expressed in metres, of the belt;
λ is the idler trough angle.
2 © ISO 2004 – All rights reserved

---------------------- Page: 6 ----------------------
ISO 5293:2004(E)

Figure 2 — Pulley on line with top centre idler roller
4.3.2.2 The pulley is elevated by 1/3 of the trough depth above the line of centre idler roller (see Figure 3).
h is then equal to 2
...

SLOVENSKI STANDARD
SIST ISO 5293:2012
01-oktober-2012
1DGRPHãþD
SIST ISO 5293:1997
SIST ISO/TR 10357:1997
1DSUDYH]DNRQWLQXLUQLWUDQVSRUW7UDNRYLWUDþQLKWUDQVSRUWHUMHY8JRWDYOMDQMH
SUHKRGQHUD]GDOMHL]WULGHOQHNRULWDVWHREOLNHYUDYQRREOLNRWUDNX
Conveyor belts - Determination of minimum transition distance on three idler rollers
Courroies transporteuses - Détermination de la distance minimale de transition d'auge à
trois rouleaux égaux
Ta slovenski standard je istoveten z: ISO 5293:2004
ICS:
53.040.20 Deli za transporterje Components for conveyors
SIST ISO 5293:2012 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 5293:2012

---------------------- Page: 2 ----------------------

SIST ISO 5293:2012


INTERNATIONAL ISO
STANDARD 5293
Second edition
2004-09-15

Conveyor belts — Determination of
minimum transition distance on three
idler rollers
Courroies transporteuses — Détermination de la distance minimale de
transition d'auge à trois rouleaux égaux




Reference number
ISO 5293:2004(E)
©
ISO 2004

---------------------- Page: 3 ----------------------

SIST ISO 5293:2012
ISO 5293:2004(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2004
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2004 – All rights reserved

---------------------- Page: 4 ----------------------

SIST ISO 5293:2012
ISO 5293:2004(E)
Contents Page
Foreword. iv
1 Scope. 1
2 Normative references . 1
3 Calculation of minimum transition distance .1
4 Application of the formula for transition distance . 2
4.1 General. 2
4.2 Values of elastic modulus, M, of belt . 2
4.3 Values of vertical distance, h, which the belt edge raises or lowers. 2
4.4 Values of ∆T . 4
Annex A (normative) Derivation of the formula for transition distance. 6
Annex B (normative) Derivation of values of ∆T . 8
Bibliography . 11

© ISO 2004 – All rights reserved iii

---------------------- Page: 5 ----------------------

SIST ISO 5293:2012
ISO 5293:2004(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 5293 was prepared by Technical Committee ISO/TC 41, Pulleys and belts (including veebelts),
Subcommittee SC 3, Conveyor belts.
This second edition cancels and replaces ISO 5293:1981 and ISO/TR 10357:1989, which have been
technically revised.

iv © ISO 2004 – All rights reserved

---------------------- Page: 6 ----------------------

SIST ISO 5293:2012
INTERNATIONAL STANDARD ISO 5293:2004(E)

Conveyor belts — Determination of minimum transition
distance on three idler rollers
1 Scope
This International Standard specifies the formula for calculating conveyor belt transition distances and details
its application and derivation.
[1]
This International Standard is not suitable or valid for light conveyor belts as described in ISO 21183-1 .
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 1537, Continuous mechanical handling equipment for loose bulk materials — Troughed belt conveyors
(other than portable conveyors) — Idlers
ISO 9856, Conveyor belts — Determination of elastic and permanent elongation and calculation of elastic
modulus
3 Calculation of minimum transition distance
The formula for calculating the transition distance, the derivation of which is given in Annex A, is as follows:
0,5
hM

L=−()1cosλ
1

sinλ ∆T

where
L is the transition distance, expressed in metres;
1
h is the vertical distance, expressed in metres, the belt edge raises or lowers in the transition
(see Figure 1);
λ is the idler trough angle;
M is the elastic modulus, expressed in newtons per millimetre, measured under tension T ;
R
T is the maximum recommended belt-to-belt joint tension (RMBT), expressed in newtons per
R
millimetre, for a steady-state condition of the conveyor;
∆T is the induced belt edge stress, expressed in newtons per millimetre, in the transition.
© ISO 2004 – All rights reserved 1

---------------------- Page: 7 ----------------------

SIST ISO 5293:2012
ISO 5293:2004(E)

Figure 1 — Transition distance
4 Application of the formula for transition distance
4.1 General
Calculate the transition distance by using appropriate values of M, h and ∆T as described in 4.2 to 4.4, as
appropriate.
4.2 Values of elastic modulus, M, of belt
Determine the values in accordance with ISO 9856.
4.3 Values of vertical distance, h, which the belt edge raises or lowers
4.3.1 General
Calculate the values from the idler trough angle λ (see Figure 1) and the position of the terminal pulley with
respect to the centre idler roller. Four common situations are described in 4.3.2 and 4.3.3.
4.3.2 Three equal length roller
4.3.2.1 The pulley is on a line with the top centre idler roller (see Figure 2).
bsinλ
h=
3
where
h is the vertical distance, expressed in met
...

NORME ISO
INTERNATIONALE 5293
Deuxième édition
2004-09-15


Courroies transporteuses —
Détermination de la distance minimale de
transition d'auge à trois rouleaux égaux
Conveyor belts — Determination of minimum transition distance on
three idler rollers




Numéro de référence
ISO 5293:2004(F)
©
ISO 2004

---------------------- Page: 1 ----------------------
ISO 5293:2004(F)
PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info
du fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir
l'exploitation de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation,
veuillez en informer le Secrétariat central à l'adresse donnée ci-dessous.


©  ISO 2004
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit
de l'ISO à l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax. + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse

ii © ISO 2004 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 5293:2004(F)
Sommaire Page
Avant-propos. iv
1 Domaine d'application. 1
2 Références normatives. 1
3 Calcul de la distance minimale de transition d'auge. 1
4 Application de la formule de calcul de la distance de transition d'auge . 2
4.1 Généralités. 2
4.2 Valeurs du module d'élasticité, M, de la courroie. 2
4.3 Valeurs de l'élévation maximale, h, du bord de la courroie par rapport au fond d'auge. 2
4.4 Valeurs de ∆T. 4
Annexe A (normative) Détermination de la formule de calcul de la distance de transition d'auge. 6
Annexe B (normative) Détermination des valeurs de ∆T. 8
Bibliographie . 11

© ISO 2004 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
ISO 5293:2004(F)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée
aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du
comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec
la Commission électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI,
Partie 2.
La tâche principale des comités techniques est d'élaborer les Normes internationales. Les projets de Normes
internationales adoptés par les comités techniques sont soumis aux comités membres pour vote. Leur
publication comme Normes internationales requiert l'approbation de 75 % au moins des comités membres
votants.
L'attention est appelée sur le fait que certains des éléments du présent document peuvent faire l'objet de
droits de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable de ne
pas avoir identifié de tels droits de propriété et averti de leur existence.
L'ISO 5293 a été élaborée par le comité technique ISO/TC 41, Poulies et courroies (y compris les courroies
trapézoïdales), sous-comité SC 3, Courroies transporteuses.
Cette deuxième édition de l'ISO 5293 annule et remplace l'ISO 5293:1981 et l'ISO/TR 10357:1989, dont elle
constitue une révision technique.

iv © ISO 2004 – Tous droits réservés

---------------------- Page: 4 ----------------------
NORME INTERNATIONALE ISO 5293:2004(F)

Courroies transporteuses — Détermination de la distance
minimale de transition d'auge à trois rouleaux égaux
1 Domaine d'application
La présente Norme internationale spécifie la formule de calcul des distances de transition d'auge des
courroies transporteuses et expose en détail son application et sa détermination.
La présente Norme internationale n'est pas adaptée ou valable pour les courroies transporteuses légères
[1]
telles que décrites dans l'ISO 21183-1 .
2 Références normatives
Les documents de référence suivants sont indispensables pour l'application du présent document. Pour les
références datées, seule l'édition citée s'applique. Pour les références non datées, la dernière édition du
document de référence s'applique (y compris les éventuels amendements).
ISO 1537, Engins de manutention continue pour produits en vrac — Transporteurs à courroie en auge (autres
que mobiles) — Rouleaux de soutien
ISO 9856, Courroies transporteuses — Détermination de l'allongement élastique et permanent et calcul du
module d'élasticité
3 Calcul de la distance minimale de transition d'auge
La formule de calcul de la distance de transition d'auge, dont la détermination est donnée dans l'Annexe A,
est la suivante:
0,5
hM

L=−()1cosλ
1

sinλ ∆T


L est la distance de transition d'auge, en mètres;
1
h est l'élévation maximale du bord de la courroie par rapport au fond d'auge (voir Figure 1), en mètres;
λ est l'angle d'auge;
M est le module d'élasticité, mesuré à la tension T , en newtons par millimètre;
R
T est la tension maximale recommandée (RMBT) de la courroie, ou du joint de la courroie, à l'état
R
stabilisé, en newtons par millimètre;
∆T est la surtension induite du bord de la courroie dans la transition d'auge, en newtons par millimètre.
© ISO 2004 – Tous droits réservés 1

---------------------- Page: 5 ----------------------
ISO 5293:2004(F)

Figure 1 — Distance de transition d'auge
4 Application de la formule de calcul de la distance de transition d'auge
4.1 Généralités
Calculer la distance de transition d'auge en utilisant les valeurs appropriées de M, h et ∆T comme indiqué en
4.2 à 4.4, selon le cas.
4.2 Valeurs du module d'élasticité, M, de la courroie
Déterminer les valeurs conformément à l'ISO 9856.
4.3 Valeurs de l'élévation maximale, h, du bord de la courroie par rapport au fond d'auge
4.3.1 Généralités
Calculer les valeurs à partir de l'angle d'auge λ (voir Figure 1) et de la position du tambour d'extrémité par
rapport au rouleau central de la courroie. Une description de quatre cas généraux figure en 4.3.2 et en 4.3.3.
4.3.2 Trois rouleaux égaux
4.3.2.1 Le tambour d'extrémité est en ligne avec le rouleau d'auge central (voir Figure 2).
bsinλ
h=
3

h est l'élévation maximale du bord de la courroie par rapport au fond d'auge (voir Figure 1), en mètres;
b est la largeur de la courroie, en mètres;
λ est l'angle d'auge.
2 © ISO 2004 – Tous droits réservés

---------------------- Page: 6 ----------------------
ISO 5293:2004(F)

Figure 2 — Tambour d'extrémité en ligne avec le rouleau d'auge central
4.3.2.2 Le tambour d'extrémité est surélevé de 1/3 de la profondeur de l'auge par rapport à la ligne du
rouleau d'auge central (voir Figure 3).
h est alors égal aux 2/3 de la profondeur d'auge, c'est-à-dire:
2sbbinλ sinλ
h=× =
33 4,5

h est l'élévation maximale du bord de la courroie par rapport au fond d'auge (voir Figure 1), en mètres;
b est la largeur de la courroie, en mètres;
λ est l'angle d'auge.

Figure 3 — Tambour d'extrémité surélevé de 1/3 de la profondeur de l'au
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.