Maintenance and repair of concrete structures — Part 4: Execution of repairs and prevention

ISO 16311-4:2014 gives requirements for substrate condition before and during application, including structural stability, storage of materials, the preparation, and application of products and systems for the protection and repair of concrete structures, including quality control and qualifications of personnel, maintenance, health and safety, and the environment.

Entretien et réparation des structures en béton — Partie 4: Exécution des réparations et prévention

General Information

Status
Withdrawn
Publication Date
06-Apr-2014
Current Stage
9599 - Withdrawal of International Standard
Completion Date
13-Mar-2024
Ref Project

Relations

Buy Standard

Standard
ISO 16311-4:2014 - Maintenance and repair of concrete structures
English language
49 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 16311-4
First edition
2014-04-15
Maintenance and repair of concrete
structures —
Part 4:
Execution of repairs and prevention
Entretien et réparation des structures en béton —
Partie 4: Exécution des réparations et prévention
Reference number
ISO 16311-4:2014(E)
©
ISO 2014

---------------------- Page: 1 ----------------------
ISO 16311-4:2014(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2014 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 16311-4:2014(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Structural stability during execution of repairs . 3
5 General requirements . 4
6 Methods of prevention and repair . 4
7 Preparation of substrate . 4
7.1 General . 4
7.2 Preparation of concrete . 4
7.3 Preparation of reinforcement .14
8 Application of products and systems .14
8.1 General .14
8.2 Structural strengthening to restore member capacity —methods .15
8.3 Defects caused by reinforcement corrosion .18
9 Quality control .19
9.1 General .19
9.2 Quality control tests and observations .19
10 Maintenance following completion of remedial action.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.