ISO 17078-4:2010

Petroleum and natural gas industries - Drilling and production equipment - Part 4: Practices for side-pocket mandrels and related equipment

ISO 17078-4:2010 provides informative documentation to assist the user/purchaser and the supplier/manufacturer in specification, design, selection, testing, calibration, reconditioning, installation and use of side-pocket mandrels, flow-control devices and associated latches and installation tools. The product-design and manufacturing-related requirements for these products are included within the other parts of ISO 17078.

Industries du pétrole et du gaz naturel — Équipement de forage et de production — Partie 4: Pratiques pour raccords à poche latérale et équipement associé

L'ISO 17078-4:2010 fournit une documentation informative pour assister l'utilisateur/acheteur et le fournisseur/fabricant lors de la spécification, la conception, la sélection, l'essai, l'étalonnage, le reconditionnement, l'installation, et l'utilisation de raccords à poche latérale, de dispositifs de contrôle de débit pour raccords à poche latérale, et d'outils d'installation et de verrouillage associés. Les exigences liées à la conception et à la fabrication de ces produits sont incluses dans les autres parties de l'ISO 17078.

General Information

• Status: Published
• Publication Date: 31-Mar-2010
• ICS: 75.180.10 - Exploratory, drilling and extraction equipment
• Technical Committee: ISO/TC 67/SC 4 - Drilling and production equipment
• Drafting Committee: ISO/TC 67/SC 4/WG 4 - Production equipment
• Current Stage: 9093 - International Standard confirmed
• Start Date: 24-Feb-2023
• Completion Date: 13-Dec-2025

Relations

• Consolidates: ISO 7371:1995/Amd 1:1997 - Household refrigerating appliances - Refrigerators with or without low-temperature compartment - Characteristics and test methods - Amendment 1: for the preservation of highly perishable foodstuffs
• Effective Date: 06-Jun-2022

Overview

ISO 17078-4:2010 - "Petroleum and natural gas industries - Drilling and production equipment - Part 4: Practices for side-pocket mandrels and related equipment" is an informative guidance document intended to help users, purchasers, suppliers and manufacturers with the specification, selection, installation and use of side-pocket mandrels, flow-control devices, and associated latches and installation tools. It complements the other parts of ISO 17078 that address product-design and manufacturing requirements by focusing on practical documentation, testing, calibration, reconditioning and operational practices.

Key topics and requirements

The standard provides practical material (not prescriptive manufacturing specifications) including:

• Specification and selection guidance for side-pocket mandrels, flow-control devices and latches.
• Testing and calibration recommendations to ensure functional performance in drilling and production environments.
• Reconditioning and maintenance practices to extend service life and maintain reliability.
• Installation and run/receive procedures for side-pocket equipment and installation tools.
• Templates and datasheets for consistent communication between purchaser and supplier - included electronic inserts such as:
  • Table G.1–G.3: user/purchaser functional specification templates (mandrels, flow-control devices, running/pulling/kick-over tools and latches)
  • Table H.1–H.3: supplier/manufacturer product data sheet templates
• Advice on creating functional specifications, product data sheets and inspection/acceptance criteria.

Practical applications

ISO 17078-4 is useful for a wide range of operational and procurement activities in the oil & gas sector:

• Preparing tender documents and functional specifications for side-pocket mandrels and flow-control devices.
• Developing factory acceptance test (FAT) and field acceptance test (FAT) checklists for testing and calibration.
• Creating standardized product data sheets and supplier documentation to streamline procurement and quality assurance.
• Informing maintenance and reconditioning programs to support well integrity and flow-control reliability.
• Training for operations, completion and maintenance teams on installation and safe handling of side-pocket equipment.

Who should use this standard

• Drilling and production engineers
• Procurement and purchasing specialists in petroleum and natural gas industries
• Tool designers, suppliers and manufacturers of side-pocket mandrels, latches and installation tools
• Maintenance, inspection and asset integrity teams
• Quality and compliance personnel preparing specifications and acceptance criteria

Related standards

• Other parts of ISO 17078 (product-design and manufacturing requirements) should be used in conjunction with Part 4 to obtain complete technical and production requirements for side-pocket mandrels and related drilling and production equipment.

Keywords: ISO 17078-4, side-pocket mandrel, flow-control device, drilling and production equipment, latches, installation tools, specification, testing, calibration, reconditioning, oil and gas.

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 17078-4
First edition
2010-04-15
Petroleum and natural gas industries —
Drilling and production equipment —
Part 4:
Practices for side-pocket mandrels and
related equipment
Industries du pétrole et du gaz naturel — Équipement de forage et de
production —
Partie 4: Pratiques pour raccords à poche latérale et équipement
associé
Reference number
©
ISO 2010
PDF disclaimer
PDF files may contain embedded typefaces. In accordance with Adobe's licensing policy, such files may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading a PDF file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create the PDF file(s) constituting this document can be found in the General Info relative to
the file(s); the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the files are suitable for
use by ISO member bodies. In the unlikely event that a problem relating to them is found, please inform the Central Secretariat at the
address given below.
This CD-ROM contains
1) the publication ISO 17078-4:2010(E) (including the datasheets) in portable document format (PDF),
which can be viewed using Adobe® Acrobat® Reader;
2) the following revisable electronic inserts:
a) Table G.1 — User/purchaser side-pocket mandrel functional specification template
b) Table G.2 — User/purchaser flow-control device functional specification template
c) Table G.3 — User/purchaser running, pulling, and kick-over tool, and latch functional
specification templates
d) Table H.1 — Supplier/manufacturer side-pocket-mandrel product data sheet template
e) Table H.2 — Supplier/manufacturer flow-control-device product data sheet template
f) Table H.3 — Supplier/manufacturer running, pulling, and kick-over tool, and latch product data
sheet template
Adobe and Acrobat are trademarks of Adobe Systems Incorporated.

COPYRIGHT PROTECTED DOCU
...

NORME ISO
INTERNATIONALE 17078-4
Première édition
2010-04-15
Industries du pétrole et du gaz naturel —
Équipement de forage et de production —
Partie 4:
Pratiques pour raccords à poche latérale
et équipement associé
Petroleum and natural gas industries — Drilling and production
equipment —
Part 4: Practices for side-pocket mandrels and related equipment

Numéro de référence
©
ISO 2010
PDF – Exonération de responsabilité
Les fichiers PDF peuvent contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ils peuvent
être imprimés ou visualisés, mais ne doivent pas être modifiés à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de fichiers PDF, les parties
concernées acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO
décline toute responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du ou des fichiers PDF qui constituent cette publication sont
disponibles dans la rubrique General Info des fichiers; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les
mesures ont été prises pour garantir l'exploitation de ces fichiers par les comités membres de l'ISO. Dans le cas peu probable où
surviendrait un problème d'utilisation, veuillez en informer le Secrétariat central à l'adresse donnée ci-dessous.

Le présent CD-ROM contient
1) la publication ISO 17078-4:2010 (y compris les datasheets) au format PDF (portable document
format), qui peut être visualisée en utilisant Adobe® Acrobat® Reader;
2) les inserts électroniques suivants en format révisable:
a) Table G.1 — User/purchaser side-pocket mandrel functional specification template
b) Table G.2 — User/purchaser flow-control device functional specification template
c) Table G.3 — User/purchaser running, pulling, and kick-over tool, and latch functional specification
templates
d) Table H.1 — Supplier/manufacturer side-pocket-mandrel product data sheet template
e) Table H.2 — Flow-control-device product data sheet template
f) Table H.3 — Running, pulling, and kick-over tool, and latch product data sheet template
Adobe et Acrobat sont des marques déposées de Adobe Systems Incorporated.

DOCUMENT PROTÉGÉ PAR COPYRIGHT

©  ISO 2010
Tous droits réservés. Sauf exigence particulière d'installati
...