EN ISO 17078-4:2010

Petroleum and natural gas industries - Drilling and production equipment - Part 4: Practices for side-pocket mandrels and related equipment (ISO 17078-4:2010)

ISO 17078-4:2010 provides informative documentation to assist the user/purchaser and the supplier/manufacturer in specification, design, selection, testing, calibration, reconditioning, installation and use of side-pocket mandrels, flow-control devices and associated latches and installation tools. The product-design and manufacturing-related requirements for these products are included within the other parts of ISO 17078.

Erdöl- und Erdgasindustrie - Bohr- und Fördereinrichtung - Teil 4: Verfahren für Seitentaschen-Rohre und zugehörige Einrichtungen (ISO 17078-4:2010)

Industries du pétrole et du gaz naturel - Équipement de forage et de production - Partie 4: Pratiques pour raccords à poche latérale et équipement associé (ISO 17078-4:2010)

L'ISO 17078-4:2010 fournit une documentation informative pour assister l'utilisateur/acheteur et le fournisseur/fabricant lors de la spécification, la conception, la sélection, l'essai, l'étalonnage, le reconditionnement, l'installation, et l'utilisation de raccords à poche latérale, de dispositifs de contrôle de débit pour raccords à poche latérale, et d'outils d'installation et de verrouillage associés. Les exigences liées à la conception et à la fabrication de ces produits sont incluses dans les autres parties de l'ISO 17078.

Industrija za predelavo nafte in zemeljskega plina - Vrtalna in proizvodna oprema - 4. del: Postopki za vpenjalne osi s stranskimi žepi in pripadajočo opremo (ISO 17078-4:2010)

Ta del ISO 17078 zagotavlja informativno dokumentacijo za pomoč uporabniku/kupcu in dobavitelju/proizvajalcu pri specifikaciji, načrtovanju, izbiranju, preskušanju, kalibriranju, remontu, namestitvi in uporabi vpenjalne osi s stranskimi žepi, naprav za nadzor pretoka in pripadajočih zapahov in orodja za namestitev. Zahteve glede načrtovanja in
izdelave teh proizvodov so zajeti v drugih delih ISO 17078. Vsebina in vključitev več panožnih dokumentov sta zajeti in opredeljeni v okviru ISO 17078 (vsi deli).

General Information

• Status: Published
• Publication Date: 14-Apr-2010
• Withdrawal Date: 30-Oct-2010
• ICS: 75.180.10 - Exploratory, drilling and extraction equipment
• Technical Committee: CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
• Drafting Committee: CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 15-Apr-2010
• Due Date: 21-Apr-2009
• Completion Date: 15-Apr-2010
• Ref Project: SIST EN ISO 17078-4:2010 - Petroleum and natural gas industries - Drilling and production equipment - Part 4: Practices for side-pocket mandrels and related equipment (ISO 17078-4:2010)

Standards Content (Sample)

SLOVENSKI STANDARD
01-junij-2010
,QGXVWULMD]DSUHGHODYRQDIWHLQ]HPHOMVNHJDSOLQD9UWDOQDLQSURL]YRGQDRSUHPD
GHO3RVWRSNL]DYSHQMDOQHRVLVVWUDQVNLPLåHSLLQSULSDGDMRþRRSUHPR,62

Petroleum and natural gas industries - Drilling and production equipment - Part 4:
Practices for side-pocket mandrels and related equipment (ISO 17078-4:2010)
Erdöl- und Erdgasindustrie - Bohr- und Fördereinrichtung - Teil 4: Verfahren für
Seitentaschen-Rohre und zugehörige Einrichtungen (ISO 17078-4:2010)
Industries du pétrole et du gaz naturel - Équipement de forage et de production - Partie
4: Pratiques pour raccords à poche latérale et équipement associé (ISO 17078-4:2010)
Ta slovenski standard je istoveten z: EN ISO 17078-4:2010
ICS:
75.180.10 Oprema za raziskovanje in Exploratory and extraction
odkopavanje equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 17078-4
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2010
ICS 75.180.10
English Version
Petroleum and natural gas industries - Drilling and production
equipment - Part 4: Practices for side-pocket mandrels and
related equipment (ISO 17078-4:2010)
Industries du pétrole et du gaz naturel - Équipement de Erdöl- und Erdgasindustrie - Bohr- und Fördereinrichtung -
forage et de production - Partie 4: Pratiques pour raccords Teil 4: Verfahren für Seitentaschen-Rohre und zugehörige
à poche latérale et équipement associé (ISO 17078- Einrichtungen (ISO 17078-4:2010)
4:2010)
This European Standard was approved by CEN on 25 March 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17078-4:2010: E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
This document (EN ISO 17078-4:2010) has been prepared by Technical Committee ISO/TC 67 "Materials,
equipment and offshore structures for petroleum, petrochemical and natural gas industries" in collaboration
with Technical Committee CEN/TC 12 “Materials, equipment and offshore structures for petroleum,
petrochemical and natural gas industries” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by October 2010, and conflicting national standards shall be withdrawn at
the latest by October 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 17078-4:2010 has been approved by CEN as a EN ISO 17078-4:2010 without any
modification.
INTERNATIONAL ISO
STANDARD 17078-4
First edition
2010-04-15
Petroleum and natural gas industries —
Drilling and production equipment —
Part 4:
Practices for side-pocket mandrels and
related equipment
Industries du pétrole et du gaz naturel — Équipement de forage et de
production —
Partie 4: Pratiques pour raccords à poche latérale et équipement
associé
Reference number
ISO 17078-4:2010(E)
©
ISO 2010
ISO 17078-4:2010(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2010
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2010 – All rights reserved

ISO 17078-4:2010(E)
Contents Page
Foreword .iv
Introduction.v
1 Scope.1
2 Normative references.1
3 Terms and definitions .2
4 Abbreviations and symbols .5
4.1 Abbreviations.5
4.2 Symbols.5
5 Guidelines for application of side-pocket mandrels and related equipment .6
5.1 General .6
5.2 Interface compatibility issues .6
5.3 Test facility for flow-control-device performance testing.6
5.4 Set-up and calibration of flow-control devices .6
5.5 Pre-installation and post-removal inspection, testing, and maintenance.6
5.6 Reconditioning side-pocket mandrels and related products .6
5.7 Reconditioning shops and shop personnel .6
5.8 User/purchaser functional specification templates.7
5.9 Supplier/manufacturer product data sheets.7
Annex A (informative) Interface compatibility issues .8
Annex B (informative) Test facilities for flow-control device performance testing .9
Annex C (informative) Set-up and calibration of flow-control devices.16
Annex D (informative) Pre-installation and post-removal inspection and testing .19
Annex E (informative) Reconditioning side-pocket mandrels and related equipment.22
Annex F (informative) Reconditioning shops and shop personnel.28
Annex G (informative) User/purchaser functional templates for side-pocket mandrels and related
equipment.32
Annex H (informative) Supplier/manufacturer product data sheet templates for side-pocket
mandrels and related equipment .41
Bibliography.47

ISO 17078-4:2010(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 17078-4 was prepared by Technical Committee ISO/TC 67, Materials, equipment and offshore structures
for petroleum, petrochemical and natural gas industries, Subcommittee SC 4, Drilling and production
equipment.
ISO 17078 consists of the following parts, under the general title Petroleum and natural gas industries —
Drilling and production equipment:
⎯ Part 1: Side-pocket mandrels
⎯ Part 2: Flow-control devices for side-pocket mandrels
⎯ Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels
⎯ Part 4: Practices for side-pocket mandrels and related equipment
iv © ISO 2010 – All rights reserved

ISO 17078-4:2010(E)
Introduction
This part of ISO 17078 has been developed by users/purchasers and suppliers/manufacturers of subsurface
side-pocket mandrels, flow-control devices used in side-pocket mandrels (hereafter called flow-control
devices), and associated latches and installation tools that are used in conjunction with side-pocket mandrel
flow-control devices. This equipment is intended for use in the worldwide petroleum and natural gas industry.
This part of ISO 17078 is intended to provide supporting information, guidelines and practices to all parties
who are involved in the specification, selection, manufacture, testing and use of side-pocket mandrels,
flow-control devices and associated latches and installation tools.
In addition to this part of ISO 17078, ISO 17078-1 provides requirements for side-pocket mandrels used in the
petroleum and natural gas industry. ISO 17078-2 provides requirements for flow-control devices. And,
ISO 17078-3 provides requirements for latches and installation tools that are used in conjunction with
side-pocket mandrel flow-control devices. Other pertinent side-pocket mandrel-related information can be
found in API standards listed in the bibliography.
It is necessary that users of this part of ISO 17078 be aware that requirements above those outlined in this
part of ISO 17078 can be needed for individual applications. This part of ISO 17078 is not intended to inhibit a
supplier/manuf
...