Information on Optical Disk Cartridges (ODC) shipping packages and ODC labels

Informations relatives aux cartouches de disques optiques (ODC) à imprimer sur les emballages de transport, les zones imprimée ODC et les étiquettes ODC

General Information

Status
Withdrawn
Publication Date
15-Mar-2000
Withdrawal Date
15-Mar-2000
Current Stage
6060 - International Standard published
Start Date
10-Feb-2000
Completion Date
16-Mar-2000
Ref Project

Buy Standard

Standard
ISO 10922:2000 - Information on Optical Disk Cartridges (ODC) shipping packages and ODC labels
English language
8 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (sample)

INTERNATIONAL ISO
STANDARD 10922
First edition
2000-03-15
Information on Optical Disk Cartridges
(ODC) shipping packages and ODC labels
Informations relatives aux cartouches de disques optiques (ODC) à
imprimer sur les emballages de transport, les zones imprimées ODC et les
étiquettes ODC
Reference number
ISO 10922:2000(E)
ISO 2000
---------------------- Page: 1 ----------------------
ISO 10922:2000(E)
PDF disclaimer

This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not

be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this

file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this

area.
Adobe is a trademark of Adobe Systems Incorporated.

Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters

were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event

that a problem relating to it is found, please inform the Central Secretariat at the address given below.

© ISO 2000

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic

or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body

in the country of the requester.
ISO copyright office
Case postale 56 � CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 734 10 79
E-mail copyright@iso.ch
Web www.iso.ch
Printed in Switzerland
ii © ISO 2000 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 10922:2000(E)
Contents Page

Introduction.................................................................................................................................................................v

1 Scope ..............................................................................................................................................................1

2 Normative references ....................................................................................................................................1

2.1 90 mm ODC.....................................................................................................................................................1

2.2 130 mm ODC...................................................................................................................................................1

2.3 300 mm ODC...................................................................................................................................................2

2.4 356 mm ODC...................................................................................................................................................2

2.5 Other references ............................................................................................................................................2

3 Terms and definitions ...................................................................................................................................2

4 Information on ODC shipping packages and ODC printed areas.............................................................3

4.1 ODC shipping packages ...............................................................................................................................3

4.2 ODC printed areas .........................................................................................................................................4

5 Labelling, material and information on the ODC labelling area................................................................5

5.1 Label location.................................................................................................................................................5

5.2 Label marking.................................................................................................................................................5

5.3 Label thickness..............................................................................................................................................5

5.4 User Identification..........................................................................................................................................5

5.5 Initialization, certification and format..........................................................................................................5

Annex A (normative) Examples and formats of information on the ODC shipping packages, the ODC

printed areas and the ODC labels ................................................................................................................6

Annex B (informative) Additional information for the ODC shipping packages and the ODC printed

areas................................................................................................................................................................7

Annex C (informative) Machine readable codes on the ODC shipping packages and ODC labels ....................8

© ISO 2000 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO 10922:2000(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO

member bodies). The work of preparing International Standards is normally carried out through ISO technical

committees. Each member body interested in a subject for which a technical committee has been established has

the right to be represented on that committee. International organizations, governmental and non-governmental, in

liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical

Commission (IEC) on all matters of electrotechnical standardization.

International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.

Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.

Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.

Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights.

International Standard ISO 10922 was prepared by Technical Committee ISO/TC 171, Document imaging

applications, Subcommittee SC 2, Application issues.

Annex A forms a normative part of this International Standard. Annexes B and C for information only.

iv © ISO 2000 – All rights reserved
---------------------- Page: 4 ----------------------
ISO 10922:2000(E)
Introduction

Shipping packages for Optical Disk Cartridges (ODC) vary. For example, ODC shipping packages may consist of a

box which contains jewel boxes (e.g., 5 or 10), each containing one ODC. The jewel boxes may be covered by a J-

sleeve.

Information printed on components of the shipping package assists suppliers and users in identifying contents and

making decisions on handling, shipping and storage without opening the package.
© ISO 2000 – All rights reserved v
---------------------- Page: 5 ----------------------
INTERNATIONAL STANDARD ISO 10922:2000(E)
Information on Optical Disk Cartridges (ODC) shipping packages
and ODC labels
1 Scope

This International Standard specifies information that shall be printed by the manufacturer or supplier of ODCs on

the different components of the shipping packages and on the ODC printed areas. Information that may be printed

in the ODC labels by the manufacturer, supplier or users is also specified.

This International Standard also specifies additional information that shall be printed on the different components of

the shipping package or shall be included with the shipping package.

This International Standard applies to all writable Optical Disk (OD) sizes and types including write-once read

multiple (WORM), rewritable, read only, and partially read only media, e.g., magneto-optical (MO) rewritable

combined with read only or phase change (PC) rewritable combined with read only. Compact disc (CD) media is

beyond the scope of this International Standard.
2 Normative references

The following normative documents contain provisions which, through reference in this text, constitute provisions of

this International Standard. For dated references, subsequent amendments to, or revisions of, any of these

publications do not apply. However, parties to agreements based on this International Standard are encouraged to

investigate the possibility of applying the most recent editions of the normative documents indicated below. For

undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC

maintain registers of currently valid International Standards.
2.1 90 mm ODC

ISO/IEC 10090:1992, Information technology — 90 mm optical disk cartridges, rewritable and read-only, for data

interchange.

ISO/IEC 13963:1995, Information technology — Data interchange on 90 mm optical disk cartridges — Capacity:

230 megabytes per cartridge.
2.2 130 mm ODC

ISO/IEC 9171-1:1990, Information technology — 130 mm optical disk cartridge, write once, for information

interchange — Part 1: Unrecorded optical disk cartridge.

ISO/IEC 9171-2:1990, Information technology — 130 mm optical disk cartridge, write once, for information

interchange — Part 2: Recording format.

ISO/IEC 10089:1991, Information technology — 130 mm rewritable optical disk cartridge for information

interchange.

ISO/IEC 11560:1992, Information technology — Information interchange on 130 mm optical disk cartridges using

the magneto-optical effect, for write once, read multiple functionality.
© ISO 2000 – All rights reserved 1
---------------------- Page: 6 ----------------------
ISO 10922:2000(E)

ISO/IEC 13481:1993, Information technology — Data interchange on 130 mm optical disk cartridges — Capacity:

1 gigabyte per cartridge.

ISO/IEC 13549:1993, Information technology — Data interchange on 130 mm optical disk cartridges — Capacity:

1,3 gigabytes per cartridge.
ISO/IEC 13842:1995, Information technology
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.