ISO/FDIS 45006

Occupational health and safety management — Guidelines for organizations on preventing and managing infectious diseases

This document gives guidelines for organizations on how to prevent exposure to, and manage the risks associated with, infectious diseases that: - present a risk of severe ill health or death and can impact the health, safety and wellbeing of workers and relevant interested parties; - present a lower risk to health yet have a significant impact on the organization, its workers and relevant interested parties. This document is applicable to organizations of all sizes and sectors. Note: Applicable legislation and guidance is provided by government, regulators and health authorities for specific infection controls for the protection of workers in clinical settings and other healthcare settings and for work activities on or with pathogenic microorganisms.

Management de la santé et de la sécurité au travail — Lignes directrices sur la prévention et la prise en charge des maladies infectieuses destinées aux organismes

Sistem vodenja varnosti in zdravja pri delu - Smernice organizacijam za preprečevanje in obvladovanje nalezljivih bolezni

General Information

• Status: Not Published
• ICS: 13.100 - Occupational safety. Industrial hygiene
• Technical Committee: ISO/TC 283 - Occupational health and safety management
• Drafting Committee: ISO/TC 283 - Occupational health and safety management
• Current Stage: 5020 - FDIS ballot initiated: 2 months. Proof sent to secretariat
• Start Date: 18-Sep-2023
• Completion Date: 18-Sep-2023
• Ref Project: kSIST ISO/FDIS 45006:2023 - Occupational health and safety management - Guidelines for organizations on preventing and managing infectious diseases

Relations

• Consolidated By: ISO 6145-7:2018 - Gas analysis — Preparation of calibration gas mixtures using dynamic methods — Part 7: Thermal mass-flow controllers
• Effective Date: 28-Feb-2023

Standards Content (Sample)

ISO/FDIS 45006:2023(E)
Date: 2023-06-16
ISO/TC 283/WG 5
Secretariat: BSI
Occupational health and safety management — Guidelines for organizations on preventing and
managing infectious diseases

FDIS stage

Warning for WDs and CDs
This document is not an ISO International Standard. It is distributed for review and comment. It is subject to
change without notice and may not be referred to as an International Standard.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.



© ISO 2022 – All rights reserved

---------------------- Page: 1 ----------------------
© ISO 2022
First edition
Date: 2023-09-04

---------------------- Page: 2 ----------------------
ISO/FDIS 45006:2023(E)
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no
part of this publication may be reproduced or utilized otherwise in any form or by any means,
electronic or mechanical, including photocopying, or posting on the internet or an intranet, without
prior written permission. Permission can be requested from either ISO at the address below or
ISO’sISO's member body in the country of the requester.
ISO Copyright Office
CP 401 • CH. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
Email: [e-mail] [e-mail]
Website: www.iso.orgwww.iso.org
Published in Switzerland.
iv © ISO 2023 – All rights reserved

---------------------- Page: 3 ----------------------
ISO/FDIS 45006:2023(E)
Contents
Foreword . 7
Introduction . 8
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Understanding the context of the organization . 4
4.1 General . 4
4.2 External issues . 5
4.3 Internal issues . 5
4.3.1 General . 5
4.3.2 Diversity of workers and other relevant interested parties . 6
5 Characteristics of infectious diseases . 7
6 Leadership and worker participation . 8
6.1 Leadership . 8
6.2 Consultation and participation of workers . 9
6.3 Roles, responsibilities and competence . 9
7 Communication . 9
7.1 General . 9
7.2 Methods of communication . 10
7.3 Communication with and reporting to external interested parties . 11
8 Hazards, risks and controls . 11
8.1 Identification of hazards . 11
8.2 Assessment of risks .
...

FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 45006
ISO/TC 283
Occupational health and safety
Secretariat: BSI
management — Guidelines for
Voting begins on:
2023-09-18 organizations on preventing and
managing infectious diseases
Voting terminates on:
2023-11-13
Management de la santé et de la sécurité au travail — Lignes
directrices sur la prévention et la prise en charge des maladies
infectieuses destinées aux organismes
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 45006:2023(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. © ISO 2023

---------------------- Page: 1 ----------------------
ISO/FDIS 45006:2023(E)
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 45006
ISO/TC 283
Occupational health and safety
Secretariat: BSI
management — Guidelines for
Voting begins on:
organizations on preventing and
managing infectious diseases
Voting terminates on:
Management de la santé et de la sécurité au travail — Lignes
directrices sur la prévention et la prise en charge des maladies
infectieuses destinées aux organismes
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
RECIPIENTS OF THIS DRAFT ARE INVITED TO
ISO copyright office
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
CP 401 • Ch. de Blandonnet 8
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
CH-1214 Vernier, Geneva
DOCUMENTATION.
Phone: [phone]
IN ADDITION TO THEIR EVALUATION AS
Reference number
Email: [e-mail]
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
ISO/FDIS 45006:2023(E)
Website: www.iso.org
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
Published in Switzerland
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN­
DARDS TO WHICH REFERENCE MAY BE MADE IN
ii
  © ISO 2023 – All rights reserved
NATIONAL REGULATIONS. © ISO 2023

---------------------- Page: 2 ----------------------
ISO/FDIS 45006:2023(E)
Contents Page
Foreword .v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Context of the organization .4
4.1 General . 4
4.2 External issues . 4
4.3 Internal issues . 5
4.3.1 General . 5
4.3.2 Diversity of workers and other relevant int
...

SLOVENSKI STANDARD
oSIST ISO/DIS 45006:2023
01-junij-2023
Sistem vodenja varnosti in zdravja pri delu - Smernice organizacijam za
preprečevanje in obvladovanje nalezljivih bolezni
Occupational health and safety management - Guidelines for organizations on
preventing and managing infectious diseases
Management de la santé et de la sécurité au travail — Lignes directrices sur la
prévention et la prise en charge des maladies infectieuses destinées aux organismes
Ta slovenski standard je istoveten z: ISO/DIS 45006
ICS:
13.100 Varnost pri delu. Industrijska Occupational safety.
higiena Industrial hygiene
oSIST ISO/DIS 45006:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST ISO/DIS 45006:2023

---------------------- Page: 2 ----------------------
oSIST ISO/DIS 45006:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 45006
ISO/TC 283 Secretariat: BSI
Voting begins on: Voting terminates on:
2022-10-25 2023-01-17
Occupational health and safety management — Guidelines
for organizations on preventing and managing infectious
diseases
ICS: ISO ics
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
This document is circulated as received from the committee secretariat.
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 45006:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

---------------------- Page: 3 ----------------------
oSIST ISO/DIS 45006:2023
ISO/DIS 45006:2022(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 45006
ISO/TC 283 Secretariat: BSI
Voting begins on: Voting terminates on:

Occupational health and safety management — Guidelines
for organizations on preventing and managing infectious
diseases
ICS: ISO ics
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2022
THEREFORE SUBJECT TO CHANGE AND MAY
This document is circulated as received from the committee secretariat.
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: [phone]
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: [e-mail]
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 45006:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2022 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

---------------------- Page: 4 ----------------------
oSIST ISO/DIS 45006:2023
ISO/DIS 45006:2022(E)
Contents Page
Foreword .v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions .
...