ISO/IEC 23000-22:2019/Amd 1:2021
(Amendment)Information technology — Multimedia application format (MPEG-A) — Part 22: Multi-image application format (MIAF) — Amendment 1: Reference software and conformance for multi-image application format
Information technology — Multimedia application format (MPEG-A) — Part 22: Multi-image application format (MIAF) — Amendment 1: Reference software and conformance for multi-image application format
Technologies de l'information — Format pour application multimédia (MPEG-A) — Partie 22: Format pour application à images multiples (MIAF) — Amendement 1: Logiciel de référence et conformité pour le format pour application à images multiples
General Information
Relations
Buy Standard
Standards Content (Sample)
INTERNATIONAL ISO/IEC
STANDARD 23000-22
First edition
2019-06
AMENDMENT 1
2021-02
Information technology — Multimedia
application format (MPEG-A) —
Part 22:
Multi-image application format (MIAF)
AMENDMENT 1: Reference software
and conformance for multi-image
application format
Technologies de l'information — Format pour application multimédia
(MPEG-A) —
Partie 22: Format pour application à images multiples (MIAF)
AMENDEMENT 1: Logiciel de référence et conformité pour le format
pour application à images multiples
Reference number
ISO/IEC 23000-22:2019/Amd.1:2021(E)
©
ISO/IEC 2021
---------------------- Page: 1 ----------------------
ISO/IEC 23000-22:2019/Amd.1:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO/IEC 2021 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/IEC 23000-22:2019/Amd.1:2021(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that
are members of ISO or IEC participate in the development of International Standards through
technical committees established by the respective organization to deal with particular fields of
technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other
international organizations, governmental and non-governmental, in liaison with ISO and IEC, also
take part in the work.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for
the different types of document should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject
of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent
rights. Details of any patent rights identified during the development of the document will be in the
Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents) or the IEC
list of patent declarations received (see http:// patents .iec .ch).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology,
Subcommittee SC 29, Coding of audio, picture, multimedia and hypermedia information.
A list of all parts in the ISO/IEC 23000 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
© ISO/IEC 2021 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO/IEC 23000-22:2019/Amd.1:2021(E)
Information technology — Multimedia application format
(MPEG-A) —
Part 22:
Multi-image application format (MIAF)
AMENDMENT 1: Reference software and conformance for
multi-image application format
Clause 5
Add a new paragraph after paragraph 6 as follows:
Annex B provides reference software and conformance.
Annex A
Add a new annex after Annex A as follows:
© ISO/IEC 2021 – All rights reserved 1
---------------------- Page: 4 ----------------------
ISO/IEC 23000-22:2019/Amd.1:2021(E)
Annex B
(informative)
Reference software and conformance
B.1 General
The multi-image application format (MIAF) is based on HEIF. HEIF has conformance and reference
software. MIAF introduces additional restrictions to HEIF and defines other profiles. Hence the MIAF
reference software serves as a validation tool for MIAF products.
There are three conformant types of “products” in the MIAF specification:
— “MIAF files”: given a file, it should be possible to indicate if it is valid accordin
...
FINAL
ISO/IEC
AMENDMENT
DRAFT
23000-22:2019
FDAM 1
ISO/IEC JTC 1/SC 29
Information technology — Multimedia
Secretariat: JISC
application format (MPEG-A) —
Voting begins on:
2020-12-07
Part 22:
Voting terminates on:
Multi-image application format (MIAF)
2021-02-01
AMENDMENT 1: Reference software
and conformance for multi-image
application format
Technologies de l'information — Format pour application multimédia
(MPEG-A) —
Partie 22: Format pour application à images multiples (MIAF)
AMENDEMENT 1
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/IEC 23000-22:2019/FDAM 1:2020(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
©
NATIONAL REGULATIONS. ISO/IEC 2020
---------------------- Page: 1 ----------------------
ISO/IEC 23000-22:2019/FDAM 1:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO/IEC 2020 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/IEC 23000-22:2019/FDAM 1:2020(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that
are members of ISO or IEC participate in the development of International Standards through
technical committees established by the respective organization to deal with particular fields of
technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other
international organizations, governmental and non-governmental, in liaison with ISO and IEC, also
take part in the work.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for
the different types of document should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject
of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent
rights. Details of any patent rights identified during the development of the document will be in the
Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents) or the IEC
list of patent declarations received (see http:// patents .iec .ch).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology,
Subcommittee SC 29, Coding of audio, picture, multimedia and hypermedia information.
A list of all parts in the ISO/IEC 23000 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
© ISO/IEC 2020 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO/IEC 23000-22:2019/FDAM 1:2020(E)
Information technology — Multimedia application format
(MPEG-A) —
Part 22:
Multi-image application format (MIAF)
AMENDMENT 1: Reference software and conformance for
multi-image application format
Clause 5
Add a new paragraph after paragraph 6 as follows:
Annex B provides reference software and conformance.
Annex A
Add a new annex after Annex A as follows:
© ISO/IEC 2020 – All rights reserved 1
---------------------- Page: 4 ----------------------
ISO/IEC 23000-22:2019/FDAM 1:2020(E)
Annex B
(informative)
Refer
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.