ISO 17871:2020/FDAmd 2

• Status: Not Published
• ICS: 23.020.35 - Gas cylinders
• Technical Committee: ISO/TC 58/SC 2 - Cylinder fittings
• Drafting Committee: ISO/TC 58/SC 2/WG 6 - Gas cylinder valves - Specifications and testing
• Current Stage: 5020 - FDIS ballot initiated: 2 months. Proof sent to secretariat
• Start Date: 31-Aug-2026
• Completion Date: 31-Aug-2026

• Consolidates: EN ISO 17871:2020/FprA2 - Gas cylinders - Quick-release cylinder valves - Specification and type testing - Amendment 2 (ISO 17871:2020/FDAM 2:2026)
• Effective Date: 12-Feb-2026
• Amends: ISO 17871:2020 - Gas cylinders — Quick-release cylinder valves — Specification and type testing
• Effective Date: 01-Jun-2024

Overview

ISO 17871:2020/FDAmd 2:2026 is an international amendment standard focused on quick-release cylinder valves for gas cylinders. Developed by ISO Technical Committee 58, Subcommittee 2, this amendment refines the requirements for the specification and type testing of these crucial components. The standard clarifies and updates key testing procedures, marking requirements, and references to associated standards, ensuring continued safety and harmonization in the use of quick-release valves within various industries.

Quick-release cylinder valves are essential safety and operational features, allowing for rapid connection and disconnection of gas cylinders in critical contexts, such as fire-fighting systems and industrial gas supply. This amendment ensures these valves meet up-to-date safety, reliability, and performance benchmarks in line with the latest international standards.

Key Topics

• Scope Clarification: Specifies that the document covers quick-release cylinder valves only as closures-other integrated functions are beyond the scope and are handled by related standards.
• Updates to Normative References: Aligns requirements with recent editions of related standards, such as ISO 10297:2024, ISO 17879:2026, and ISO 23826, harmonizing testing and product marking.
• Leak-tightness and Pressure Testing:
  • Clarifies obligations for internal and external leak tightness testing.
  • Sets maximum allowable external leakage limits.
  • Details appropriate pressures and cycles for hydraulic and endurance testing.
• Special Provisions for Fire-Fighting Systems: Addresses unique requirements for quick-release valves used in fixed fire-fighting systems, referencing ISO 16003 and EN 12094-4 for further details.
• Marking Requirements: Mandates durable product markings via permanent methods (e.g., laser etching, engraving), with specific information and standardized marking conventions.
• Test Harmonization: Ensures procedural consistency for test pressure terminology and protocols, supporting compatibility across related ISO standards.

Applications

The provisions and updates in ISO 17871:2020/FDAmd 2 enhance the practical value of the standard in a range of real-world settings where quick-release cylinder valves are used:

• Fixed Fire-Fighting Systems: Ensures that valves integrated into fire suppression provisions in buildings, wind turbines, ships, and oil platforms meet robust safety and performance criteria.
• Industrial Gas Distribution: Supports industries requiring quick-disconnect features in their gas supply lines by standardizing valve requirements and testing approaches.
• Safety and Compliance: Assists manufacturers, inspectors, and facility operators in verifying valve integrity through harmonized type testing and clear marking rules.
• International Trade: By harmonizing requirements with updated European and global standards, the amendment facilitates cross-border acceptance and regulatory compliance for cylinder valves.
• Maintenance and Retrofit Activities: Guides servicing organizations in verifying valve conformity after manufacture or during cylinder refurbishment.

Related Standards

To ensure a comprehensive approach, ISO 17871:2020/FDAmd 2 should be used in conjunction with the following standards, which provide detailed requirements for design, testing, and associated integrated functions:

• ISO 10297:2024 - Gas cylinder valves - Specification and type testing
• ISO 17879:2026 - Gas cylinders - Self-closing cylinder valves - Specification and type testing
• ISO 23826:2021 - Gas cylinders - Ball valves - Specification and type testing
• ISO 16003 - Fixed fire-fighting systems - Cylinder valve requirements
• EN 12094-4 - Fixed firefighting systems - Components for gas extinguishing systems - Requirements and test methods for automated quick-release valves
• ISO 15996 - Gas cylinders - Residual pressure valves - Specification and type testing

Summary

The amendment ISO 17871:2020/FDAmd 2:2026 delivers improved clarity and harmonization for manufacturers, testing bodies, and end users of quick-release cylinder valves, strengthening safety, compliance, and interoperability across the global gas cylinder industry. By staying aligned with the latest normative references and updating key technical requirements, this ISO standard remains a vital resource for ensuring best practices in valve specification, testing, and marking.

FINAL DRAFT
Amendment
ISO 17871:2020/
FDAM 2
ISO/TC 58/SC 2
Gas cylinders — Quick-release
Secretariat: AFNOR
cylinder valves — Specification and
Voting begins on:
type testing
2026-08-31
AMENDMENT 2
Voting terminates on:
2026-10-26
Bouteilles à gaz — Robinets de bouteilles à ouverture rapide —
Spécifications et essais de type
AMENDEMENT 2
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
ISO/CEN PARALLEL PROCESSING LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
Reference number
ISO 17871:2020/FDAM 2:2026(en) © ISO 2026

FINAL DRAFT
ISO 17871:2020/FDAM 2:2026(en)
Amendment
ISO 17871:2020/
FDAM 2
ISO/TC 58/SC 2
Gas cylinders — Quick-release
Secretariat: AFNOR
cylinder valves — Specification and
Voting begins on:
type testing
AMENDMENT 2
Voting terminates on:
Bouteilles à gaz — Robinets de bouteilles à ouverture rapide —
Spécifications et essais de type
AMENDEMENT 2
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
© ISO 2026
IN ADDITION TO THEIR EVALUATION AS
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
ISO/CEN PARALLEL PROCESSING
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
or ISO’s member body in the country of the requester.
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland Reference number
ISO 17871:2020/FDAM 2:2026(en) © ISO 2026

ii
ISO 17871:2020/FDAM 2:2026(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 58, Gas cylinders, Subcommittee SC 2, Cylinder
valves, in collaboration with the European Committee for Standardization (CEN) Technical Committee CEN/
TC 23, Transportable gas cylinders, in accordance with the Agreement on technical cooperation between ISO
and CEN (Vienna Agreement).
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.

iii
ISO 17871:2020/FDAM 2:2026(en)
Gas cylinders — Quick-release cylinder valves — Specification
and type testing
AMENDMENT 2
Scope, paragraph after NOTE 2
Replace the text with the following.
“This document only covers the function of a quick-release cylinder valve as a closure. Other additional
functions that can be integrated into the valve can be covered by other standards. Such standards do
however not constitute requirements of this document.”

Scope, new NOTE 3
Add the following NOTE at the end of the Scope.
“NOTE 3 Certain specific requirements for quick-release cylinder valves for fixed fire-fighting systems
that are in addition to those given in this document are specified in ISO 16003 and at a regional level, e.g. in
EN 12094–4. Certain specific requirements for residual pressure valves (RPVs), that are in addition to those
given in this document, are given in ISO 15996.”

Clause 2, Normative references
Replace “ISO 10297:2014+Amd1: 2017” with “ISO 10297:2024” and “ISO 17879:2017” with “ISO 17879:2026”.

4.1, first paragraph
Replace the first paragraph with the following.
“Quick-release cylinder valves shall comply with all requirements of ISO 23826 (except Clause 8), ISO 10297
or ISO 17879, as applicable, unless this document expressly allows differing requirements or stipulates
additional requirements.”
4.1, last paragraph
Replace “ISO 10297:2014+Amd1: 2017, 5.2” with “ISO 10297:2024, 5.2” and “ISO 17879:2017, 5.2” with
“ISO 17879:2026, 5.2”.
4.2.1, first paragraph
Replace the first paragraph with the following.
“Differing from the requirements given in ISO 23826:2021, 5.3, if the valve filling connection is separated
from the valve outlet connection and equipped with a non-return valve, the requirements for the filling

ISO 17871:2020/FDAM 2:2026(en)
connection non-return valve given in ISO 10297:2024, 5.3, shall be met, but the number of endurance cycles
for the filling connection non-return valve shall be as specified by the manufacturer.”

4.2.1, last paragraph
Replace the last paragraph with the following NOTE.
“NOTE ISO 10297:2024, 5.3, is referred to because the content referred to in ISO 23826 has been sup
...

ISO 17871:2020/FDAMFDAmd 2:2026(en)
ISO /TC 58/SC 2/WG 6
Secretariat: AFNOR
Date: 2026-07-06xx
Gas cylinders — Quick-release cylinder valves — Specification and
type testing — Amendment
AMENDMENT 2
Bouteilles à gaz — Robinets de bouteilles à ouverture rapide — Spécifications et essais de type — Amendement
AMENDEMENT 2
FDIS stage
TTTThhhhiiiis drs drs drs draaaafffftttt i i i is s s s susususubbbbmmmmiiiitttttttteeeed d d d ttttoooo  aaaa  ppppaaaarrrraaaallellellellel l l l vvvvooootttteeee i i i innnn  IIIISSSSOOOO,,,,  CCCCEEEEN.N.N.N.

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication
may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying,
or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO
at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
Fax: [phone]
EmailE-mail: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of
ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent rights
in respect thereof. As of the date of publication of this document, ISO had not received notice of (a) patent(s)
which may be required to implement this document. However, implementers are cautioned that this may not
represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 58, Gas cylinders, Subcommittee SC 2, Cylinder
valves, in collaboration with the European Committee for Standardization (CEN) Technical Committee CEN/TC
23, Transportable gas cylinders, in accordance with the Agreement on technical cooperation between ISO and
CEN (Vienna Agreement).
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iii
Gas cylinders — Quick-release cylinder valves — Specification and
type testing — Amendment
AMENDMENT 2
Scope, paragraph after NOTE 2
Replace the text with the following.
“This document only covers the function of a quick-release cylinder valve as a closure. Other additional
functions that can be integrated into the valve can be covered by other standards. Such standards do however
not constitute requirements of this document.”

Scope, new NOTE 3
Add the following NOTE at the end of the Scope.
“NOTE 3 Certain specific requirements for quick-release cylinder valves for fixed fire-fighting systems
that are in addition to those given in this document are specified in ISO 16003 and at a regional level, e.g. in
EN 12094–4. Certain specific requirements for residual pressure valves (RPVs), that are in addition to those
given in this document, are given in ISO 15996.”

Clause 2, Normative references
Replace “ISO 10297:2014+Amd1:2017” with “ISO 10297:2024” and “ISO 17879:2017” with
“ISO 17879:2026”.
4.1, first paragraph
Replace the first paragraph with the following.
“Quick-release cylinder valves shall comply with all requirements of ISO 23826 (except Clause 8), ISO 10297
or ISO 17879, as applicable, unless this document expressly allows differing requirements or stipulates
additional requirements.”
4.1, last paragraph
Replace “ISO 10297:2014+Amd1:2017, 5.2” with “ISO 10297:2024, 5.2” and “ISO 17879:2017, 5.2” with “ISO
17879:2026, 5.2”.
4.2.1, first paragraph
Replace the first paragraph with the following.
“Differing from the requirements given in ISO 23826:2021, 5.3, if the valve filling connection is separated from
the valve outlet connection and equipped with a non-return valve, the requirements for the filling connection
non-return valve given in ISO 10297:2024, 5.3, shall be met, but the number of endurance cycles for the filling
connection non-return valve shall be as specified by the manufacturer.”

4.2.1, last paragraph
Replace the last paragraph with the following NOTE.
“NOTE ISO 10297:2024, 5.3, is referred to because the content referred to in ISO 23826 has been
superseded by ISO 10297:2024, 5.3.”

4.2.2, first paragraph
Replace “ISO 10297:2014+Amd1:2017, 5.5.2” with “ISO 10297:2024, 5.4.2”.

4.2.2, last paragraph
Replace “ISO 10297:2014+Amd1:2017, 5.5.2” with “ISO 10297:2024, 5.4.2” and “ISO 17879:2017, 5.4.2” with
“ISO 17879:2026, 5.4.2”.
4.2.3
Replace “ISO 10297:2014+Amd1:2017, 5.6.3” with “ISO 10297:2024, 5.5.2” and “ISO 17879:2017, 5.5.3” with
“ISO 17879:2026, 5.5.2”.
4.2.4
Replace “ISO 10297:2014+Amd1:2017, 5.7” with “ISO 10297:2024, 5.6”.

4.2.5
Replace the paragraph with the following.
“Differing from ISO 10297:2024, 5.7, ISO 17879:2026, 5.6 or ISO 23826:2021, 5.7, as applic
...

PROJET FINAL
Amendement
ISO 17871:2020/
FDAM 2
ISO/TC 58/SC 2
Bouteilles à gaz — Robinets de
Secrétariat: AFNOR
bouteilles à ouverture rapide —
Début de vote:
Spécifications et essais de type
2026-08-31
AMENDEMENT 2
Vote clos le:
2026-10-26
Gas cylinders — Quick-release cylinder valves — Specification
and type testing
AMENDMENT 2
LES DESTINATAIRES DU PRÉSENT PROJET SONT
INVITÉS À PRÉSENTER, AVEC LEURS OBSERVATIONS,
NOTIFICATION DES DROITS DE PROPRIÉTÉ DONT ILS
AURAIENT ÉVENTUELLEMENT CONNAISSANCE ET À
FOURNIR UNE DOCUMENTATION EXPLICATIVE.
OUTRE LE FAIT D’ÊTRE EXAMINÉS POUR
ÉTABLIR S’ILS SONT ACCEPTABLES À DES FINS
INDUSTRIELLES, TECHNOLOGIQUES ET COM-MERCIALES,
AINSI QUE DU POINT DE VUE DES UTILISATEURS, LES
PROJETS DE NORMES
TRAITEMENT PARALLÈLE ISO/CEN
INTERNATIONALES DOIVENT PARFOIS ÊTRE CONSIDÉRÉS
DU POINT DE VUE DE LEUR POSSI BILITÉ DE DEVENIR DES
NORMES POUVANT
SERVIR DE RÉFÉRENCE DANS LA RÉGLEMENTATION
NATIONALE.
Numéro de référence
ISO 17871:2020/FDAM 2:2026(fr) © ISO 2026

PROJET FINAL
ISO 17871:2020/FDAM 2:2026(fr)
Amendement
ISO 17871:2020/
FDAM 2
ISO/TC 58/SC 2
Bouteilles à gaz — Robinets de
Secrétariat: AFNOR
bouteilles à ouverture rapide —
Début de vote:
Spécifications et essais de type
2026-08-31
AMENDEMENT 2
Vote clos le:
2026-10-26
Gas cylinders — Quick-release cylinder valves — Specification
and type testing
AMENDMENT 2
LES DESTINATAIRES DU PRÉSENT PROJET SONT
INVITÉS À PRÉSENTER, AVEC LEURS OBSERVATIONS,
NOTIFICATION DES DROITS DE PROPRIÉTÉ DONT ILS
AURAIENT ÉVENTUELLEMENT CONNAISSANCE ET À
FOURNIR UNE DOCUMENTATION EXPLICATIVE.
DOCUMENT PROTÉGÉ PAR COPYRIGHT
OUTRE LE FAIT D’ÊTRE EXAMINÉS POUR
ÉTABLIR S’ILS SONT ACCEPTABLES À DES FINS
© ISO 2026 INDUSTRIELLES, TECHNOLOGIQUES ET COM-MERCIALES,
AINSI QUE DU POINT DE VUE DES UTILISATEURS, LES
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
PROJETS DE NORMES
TRAITEMENT PARALLÈLE ISO/CEN
INTERNATIONALES DOIVENT PARFOIS ÊTRE CONSIDÉRÉS
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
DU POINT DE VUE DE LEUR POSSI BILITÉ DE DEVENIR DES
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
NORMES POUVANT
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
SERVIR DE RÉFÉRENCE DANS LA RÉGLEMENTATION
NATIONALE.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: [phone]
E-mail: [e-mail]
Web: www.iso.org
Publié en Suisse Numéro de référence
ISO 17871:2020/FDAM 2:2026(fr) © ISO 2026

ii
ISO 17871:2020/FDAM 2:2026(fr)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux
de normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général
confiée aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire
partie du comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec
la Commission électrotechnique internationale (IEC) en ce qui concerne la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier, de prendre note des différents
critères d'approbation requis pour les différents types de documents ISO. Le présent document
a été rédigé conformément aux règles de rédaction données dans les Directives ISO/IEC, Partie 2
(voir www.iso.org/directives).
L'ISO attire l'attention sur le fait que la mise en application du présent document peut entraîner l'utilisation
d'un ou de plusieurs brevets. L'ISO ne prend pas position quant à la preuve, à la validité et à l'applicabilité
de tout droit de propriété revendiqué à cet égard. À la date de publication du présent document, l'ISO
n'avait pas reçu notification qu'un ou plusieurs brevets pouvaient être nécessaires à sa mise en application.
Toutefois, il y a lieu d'avertir les responsables de la mise en application du présent document que des
informations plus récentes sont susceptibles de figurer dans la base de données de brevets, disponible à
l'adresse www.iso.org/brevets. L'ISO ne saurait être tenue pour responsable de ne pas avoir identifié de tels
droits de brevet.
Les appellations commerciales éventuellement mentionnées dans le présent document sont données pour
information, par souci de commodité, à l'intention des utilisateurs et ne sauraient constituer un engagement.
Pour une explication de la nature volontaire des normes, la signification des termes et expressions
spécifiques de l'ISO liés à l'évaluation de la conformité, ou pour toute information au sujet de l'adhésion de
l'ISO aux principes de l'Organisation mondiale du commerce (OMC) concernant les obstacles techniques au
commerce (OTC), voir le lien suivant: www.iso.org/iso/fr/avant-propos.html.
Le présent document a été élaboré par le comité technique ISO/TC 58, Bouteilles à gaz, sous-comité SC 2,
Accessoires de bouteilles, en collaboration avec le comité technique CEN/TC 23, Bouteilles à gaz transportables
du Comité européen de normalisation (CEN), conformément à l'Accord de coopération technique entre l'ISO
et le CEN (Accord de Vienne).
Il convient que l'utilisateur adresse tout retour d'information ou toute question concernant le présent
document à l'organisme national de normalisation de son pays. Une liste exhaustive desdits organismes se
trouve à l'adresse www.iso.org/fr/members.html.

iii
ISO 17871:2020/FDAM 2:2026(fr)
Bouteilles à gaz — Robinets de bouteilles à ouverture rapide
— Spécifications et essais de type
AMENDEMENT 2
Domaine d'application, alinéa après la NOTE 2
Remplacer le texte par ce qui suit.
“Le présent document couvre uniquement la fonction d'un robinet de bouteille à ouverture rapide en tant
que dispositif de fermeture. Les autres fonctions susceptibles de s'intégrer au robinet peuvent être couvertes
par d'autres normes. Toutefois, ces normes ne constituent pas des exigences au sens du présent document.”

Domaine d'application, nouvelle NOTE 3
Ajouter la NOTE suivante à la fin du Domaine d'application.
“NOTE 3 En plus de celles qui sont indiquées dans le présent document, certaines exigences
particulières aux robinets de bouteilles à ouverture rapide destinés aux installations fixes de lutte contre
l'incendie sont spécifiées dans l'ISO 16003 et au niveau régional, par exemple dans l'EN 12094-4. En plus de
celles qui sont indiquées dans le présent document, certaines exigences particulières aux robinets à pression
résiduelle sont spécifiées dans l'ISO 15996.”

Article 2, Références normatives
Remplacer “ISO 10297:2014+Amd1: 2017” par “ISO 10297:2024” et “ISO 17879:2017” par “ISO 17879:2026”.

4.1, premier alinéa
Remplacer le premier alinéa par ce qui suit.
“Les robinets de bouteilles à ouverture rapide doivent satisfaire à toutes les exigences de l'ISO 23826
(sauf Article 8), de l'ISO 10297 ou de l'ISO 17879, selon le cas, à moins que le présent document n'autorise
expressément des exigences différentes ou ne stipule des exigences supplémentaires.”

4.1, dernier alinéa
Remplacer “ISO 10297:2014+Amd1: 2017, 5.2” par “ISO 10297:2024, 5.2” et “ISO 17879:2017, 5.2” par
“ISO 17879:2026, 5.2”.
4.2.1, premier alinéa
Remplacer le premier alinéa par ce qui suit.

ISO 17871:2020/FDAM 2:2026(fr)
“Contrairement aux exigences spécifiées dans l'ISO 23826:2021, 5.3, si le raccord de remplissage du robinet
est séparé du raccord de sortie du robinet et équipé d'un clapet anti-retour, les exigences relatives au clapet
anti-retour du raccord de remplissage énoncées dans l'ISO 10297:2024, 5.3, doivent être respectées, mais le
nombre de cycles d'endurance pour le clapet anti-retour du raccord de remplissage doit être celui spécifié
par le fabricant.”
4.2.1, dernier alinéa
Remplacer le dernier alinéa par la NOTE suivante.
“NOTE L'ISO 10297:2024, 5.3, sert
...