ISO 7240-14:2013

Fire detection and alarm systems — Part 14: Design, installation, commissioning and service of fire detection and fire alarm systems in and around buildings

ISO 7240-14:2013 specifies the design, installation, commissioning, and service requirements for a fire detection and alarm system (FDAS), which is primarily intended to provide early detection of fire and notification within one or more specified indoor or outdoor areas for the protection of lives. The FDAS includes automatic detection of a fire and manual initiation of a fire alarm, with audible and visual warning to people within the detection area. ISO 7240-14:2013 also specifies requirements for FDAS capable of providing signals to audible warning systems in accordance with ISO 7240-19, to initiate the operation of ancillary technical services, such as fixed fire extinguishing systems, and to other precautions and actions. The protection of property is outside the scope of ISO 7240-14:2013. However, the requirements specified herein may be used as recommendations for property protection.

Systèmes de détection et d'alarme d'incendie — Partie 14: Conception, installation, prise en charge et entretien des systèmes de détection d'incendie et d'alarme d'incendie à l'intérieur et autour des bâtiments

General Information

• Status: Published
• Publication Date: 28-Jul-2013
• ICS: 13.220.20 - Fire protection
• Technical Committee: ISO/TC 21/SC 3 - Fire detection and alarm systems
• Drafting Committee: ISO/TC 21/SC 3 - Fire detection and alarm systems
• Current Stage: 9060 - Close of review
• Start Date: 04-Jun-2029

Relations

• Revises: ISO/TR 7240-14:2003 - Fire detection and alarm systems — Part 14: Guidelines for drafting codes of practice for design, installation and use of fire detection and fire alarm systems in and around buildings
• Effective Date: 25-Dec-2010

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 7240-14
First edition
2013-08-01
Fire detection and alarm systems —
Part 14:
Design, installation, commissioning
and service of fire detection and fire
alarm systems in and around buildings
Systèmes de détection et d’alarme d’incendie —
Partie 14: Conception, installation, prise en charge et entretien des
systèmes de détection d’incendie et d’alarme d’incendie à l’intérieur et
autour des bâtiments
Reference number
ISO 7240-14:2013(E)
©
ISO 2013

---------------------- Page: 1 ----------------------
ISO 7240-14:2013(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 7240-14:2013(E)

Contents Page
Foreword .v
Introduction .vii
1 Scope . 1
2 Normative references . 1
3 Terms, definitions, and abbreviated terms . 1
3.1 Terms and definitions . 1
3.2 Abbreviated terms . 3
4 Equipment and material . 3
4.1 Quality of components . 3
4.2 Standards . 3
4.3 Environmental requirements . 3
4.4 Additional equipment . 4
4.5 Installation materials . 4
5 Compatibility . 4
5.1 Responsibility . 4
5.2 Documentation . 4
5.3 Certification . 4
6 Design .
...