ISO/IEC 23090-15:2024

Information technology — Coded representation of immersive media — Part 15: Conformance testing for versatile video coding

This document specifies a set of tests and procedures designed to indicate whether encoders or decoders meet the requirements specified in Rec. ITU-T H.266 | ISO/IEC 23090-3.

Technologies de l'information — Représentation codée de média immersifs — Partie 15: Essai de conformité pour le codage vidéo polyvalent

General Information

• Status: Published
• Publication Date: 04-Jul-2024
• ICS: 35.040.40 - Coding of audio, video, multimedia and hypermedia information
• Technical Committee: ISO/IEC JTC 1/SC 29 - Coding of audio, picture, multimedia and hypermedia information
• Drafting Committee: ISO/IEC JTC 1/SC 29 - Coding of audio, picture, multimedia and hypermedia information
• Current Stage: 6060 - International Standard published
• Start Date: 05-Jul-2024
• Due Date: 09-Aug-2024
• Completion Date: 05-Jul-2024

Relations

• Revises: ISO/IEC 23090-15:2022 - Information technology — Coded representation of immersive media — Part 15: Conformance testing for versatile video coding
• Effective Date: 18-Feb-2023

Standards Content (Sample)

International
Standard
ISO/IEC 23090-15
Second edition
Information technology — Coded
2024-07
representation of immersive media —
Part 15:
Conformance testing for versatile
video coding
Technologies de l'information — Représentation codée de média
immersifs —
Partie 15: Essai de conformité pour le codage vidéo polyvalent
Reference number
© ISO/IEC 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
© ISO/IEC 2024 – All rights reserved
ii
Contents Page
Foreword .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Abbreviated terms . 2
5 Conventions . 4
6 Conformance testing for ITU-T H.266 | ISO/IEC 23090-3 . 4
6.1 General .4
6.2 Bitstream conformance .4
6.3 Decoder conformance .4
6.4 Procedure to test bitstreams .4
6.5 Procedure to test decoder conformance .5
6.5.1 Conformance bitstreams .5
6.5.2 Contents of the bitstream file .5
6.5.3 Requirements on output of the decoding process and timing .5
6.5.4 Static tests for output order conformance .6
6.5.5 Dynamic tests for output timing conformance .6
6.5.6 Decoder conformance test for a particular profile, tier, and level .7
6.6 Specification of the test bitstreams .7
6.6.1 General .7
6.6.2 Test bitstreams – Coding tools for Main 10 profile with 4:2:0 chroma format
and 10 bit depth.7
6.6.3 Test bitstreams – High-level syntax features for Main 10 profile with 4:2:0
chroma format and 10 bit depth .37
6.6.4 Test bitstreams – Additional chroma formats and bit depths for Main 10 profile . 50
6.6.5 Test bitstreams – Coding tools for Main 10 4:4:4 profile for 4:4:4 chroma format
and 10 bit depth.51
6.6.6 Test bitstreams – Additional chroma formats and bit depths for Main 10 4:4:4
profile . 55
6.6.7 Test bitstreams – Multilayer Main 10 profile.59
6.6.8 Test bitstreams – Multilayer Main 10 4:4:4 profile . 60
6.6.9 Test bitstreams – Main 10 Still Picture profile .61
6.6.10 Test bitstreams – Main 10 4:4:4 Still Picture profile .61
6.6.11 Test bitstreams – Main 12 profile .61
6.6.12 Test bitstreams – Main 12 Intra profile .62
6.6.13 Test bitstreams – Main 12 Still Picture profile .62
6.6.14 Test bitstreams – Main 12 4:4:4 profile .62
6.6.15 Test bitstreams – Main 12 4:4:4 Intra profile .67
6.6.16 Test bitstreams – Main 12 4:4:4 Still Picture profile . 69
6.6.17 Test bitstreams – Main 16 4:4:4 profile .71
6.6.18 Test bitstreams – Main 16 4:4:4 Intra profile . 78
6.6.19 Test bitstreams – Main 16 4:4:4 Still Picture profile . 80
6.7 Conformance test suites for Rec. ITU-T H.266 | ISO/IEC 23090-3 . 82
6.7.1 Bitstreams for Main 10 profile. 82
6.7.2 Bitstreams for Main 10 4:4:4 profile . 87
6.7.3 Bitstreams for Multilayer Main 10 profile . 87
6.7.4 Bitstreams for Multilayer Main 10 4:4:4 profile. 87
6.7.5 Bitstreams for Main 10 Still Picture profile . 87
6.7.6 Bitstreams for Main 10 4:4:4 Still Picture profile . 88
6.7.7 Bitstreams for Main 12 profile . 88
6.7.8 Bitstreams for Main 12 Intra profile . 88
6.7.9 Bitstreams for Main 12 Still Picture profile. 88
6.7.10 Bitstreams for Main 12 4:4:4 profile . 88

© ISO/IEC 2024 – All rights reserved
iii
6.7.11 Bitstreams for Main 12 4:4:4 Intra profile . 89
6.7.12 Bitstreams for Main 12 4:4:4 Still Picture profile . 89
6.7.13 Bitstreams for Main 16 4:4:4 profile . 89
6.7.14 Bitstreams for Main 16 4:4:4 Intra profile . 90
6.7.15 Bitstreams for Main 16 4:4:4 Still Picture profile . 90

© ISO/IEC 2024 – All rights reserved
iv
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical activity.
ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations,
governmental and non-governmental, in liaison with ISO and IEC, also take part in the work.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of document should be noted. This document was drafted in accordance with the editorial rules of the ISO/
IEC Directives, Part 2 (see www.iso.org/directives or www.iec.ch/members_experts/refdocs).
ISO and IEC draw attention to the possibility that the implementation of this document may involve the
use of (a) patent(s). ISO and IEC take no position concerning the evidence, validity or applicability of any
claimed patent rights in respect thereof. As of the date of publication of this document, ISO and IEC had not
received notice of (a) patent(s) which may be required to implement this document. However, implementers
are cautioned that this may not represent the latest information, which may be obtained from the patent
database available at www.iso.org/patents and https://patents.iec.ch. ISO and IEC shall not be held
responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www.iso.org/iso/foreword.html.
In the IEC, see www.iec.ch/understanding-standards.
This document was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology,
Subcommittee SC 29, Coding of audio, picture, multimedia and hypermedia information, in collaboration with
ITU-T Study Group 16 (as Rec. ITU-T H.266.1).
This second edition cancels and replaces the first edition (ISO/IEC 23090-15:2022), which has been
technically revised.
The main changes are as follows:
— addition of bitstreams for the 12-bit and 16-bit profiles that were added in ISO/IEC 23090-3:2022.
A list of all parts in the ISO/IEC 23090 series can be found on the ISO and IEC websites.
Any feedback or questions on this document should be directed to the user’s national standards
body. A complete listing of these bodies can be found at www.iso.org/members.html and
www.iec.ch/national-committees.

© ISO/IEC 2024 – All rights reserved
v
International Standard ISO/IEC 23090-15:2024(en)
Information technology — Coded representation of
immersive media —
Part 15:
Conformance testing for versatile video coding
1 Scope
This document specifies a set of tests and procedures designed to indicate whether encoders or decoders
meet the requirements specified in Rec. ITU-T H.266 | ISO/IEC 23090-3.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes
requirements of this document. For dated references, only the edition cited applies. For undated references,
the latest edi
...

FINAL DRAFT
International
Standard
ISO/IEC
FDIS
23090-15
ISO/IEC JTC 1/SC 29
Information technology — Coded
Secretariat: JISC
representation of immersive
Voting begins on:
media —
2024-04-09
Part 15:
Voting terminates on:
2024-06-04
Conformance testing for versatile
video coding
Technologies de l'information — Représentation codée de média
immersifs —
Partie 15: Essai de conformité pour le codage vidéo polyvalent
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
Reference number
ISO/IEC FDIS 23090­15:2024(en) © ISO/IEC 2024

FINAL DRAFT
ISO/IEC FDIS 23090-15:2024(en)
International
Standard
ISO/IEC
FDIS
23090-15
ISO/IEC JTC 1/SC 29
Information technology — Coded
Secretariat: JISC
representation of immersive media —
Voting begins on:
Part 15:
Conformance testing for versatile
Voting terminates on:
video coding
Technologies de l'information — Représentation codée de média
immersifs —
Partie 15: Essai de conformité pour le codage vidéo polyvalent
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
© ISO/IEC 2024
IN ADDITION TO THEIR EVALUATION AS
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
or ISO’s member body in the country of the requester.
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland Reference number
ISO/IEC FDIS 23090­15:2024(en) © ISO/IEC 2024

© ISO/IEC 2024 – All rights reserved
ii
ISO/IEC FDIS 23090-15:2024(en)
Contents Page
Foreword .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Abbreviated terms . 2
5 Conventions . 4
6 Conformance testing for ITU-T H.266 | ISO/IEC 23090-3 . 4
6.1 General .4
6.2 Bitstream conformance .4
6.3 Decoder conformance .4
6.4 Procedure to test bitstreams .4
6.5 Procedure to test decoder conformance .5
6.5.1 Conformance bitstreams .5
6.5.2 Contents of the bitstream file .5
6.5.3 Requirements on output of the decoding process and timing .5
6.5.4 Static tests for output order conformance .6
6.5.5 Dynamic tests for output timing conformance .6
6.5.6 Decoder conformance test for a particular profile, tier, and level .7
6.6 Specification of the test bitstreams .7
6.6.1 General .7
6.6.2 Test bitstreams – Coding tools for Main 10 profile with 4:2:0 chroma format
and 10 bit depth.7
6.6.3 Test bitstreams – High-level syntax features for Main 10 profile with 4:2:0
chroma format and 10 bit depth .37
6.6.4 Test bitstreams – Additional chroma formats and bit depths for Main 10 profile . 50
6.6.5 Test bitstreams – Coding tools for Main 10 4:4:4 profile for 4:4:4 chroma format
and 10 bit depth.51
6.6.6 Test bitstreams – Additional chroma formats and bit depths for Main 10 4:4:4
profile . 55
6.6.7 Test bitstreams – Multilayer Main 10 profile.59
6.6.8 Test bitstreams – Multilayer Main 10 4:4:4 profile . 60
6.6.9 Test bitstreams – Main 10 Still Picture profile .61
6.6.10 Test bitstreams – Main 10 4:4:4 Still Picture profile .61
6.6.11 Test bitstreams – Main 12 profile .61
6.6.12 Test bitstreams – Main 12 Intra profile .62
6.6.13 Test bitstreams – Main 12 Still Picture profile .62
6.6.14 Test bitstreams – Main 12 4:4:4 profile .62
6.6.15 Test bitstreams – Main 12 4:4:4 Intra profile .67
6.6.16 Test bitstreams – Main 12 4:4:4 Still Picture profile . 69
6.6.17 Test bitstreams – Main 16 4:4:4 profile .71
6.6.18 Test bitstreams – Main 16 4:4:4 Intra profile . 78
6.6.19 Test bitstreams – Main 16 4:4:4 Still Picture profile . 80
6.7 Conformance test suites for Rec. ITU-T H.266 | ISO/IEC 23090-3 . 82
6.7.1 Bitstreams for Main 10 profile. 82
6.7.2 Bitstreams for Main 10 4:4:4 profile . 87
6.7.3 Bitstreams for Multilayer Main 10 profile . 87
6.7.4 Bitstreams for Multilayer Main 10 4:4:4 profile. 87
6.7.5 Bitstreams for Main 10 Still Picture profile . 87
6.7.6 Bitstreams for Main 10 4:4:4 Still Picture profile . 88
6.7.7 Bitstreams for Main 12 profile . 88
6.7.8 Bitstreams for Main 12 Intra profile . 88
6.7.9 Bitstreams for Main 12 Still Picture profile. 88
6.7.10 Bitstreams for Main 12 4:4:4 profile . 88

© ISO/IEC 2024 – All rights reserved
iii
ISO/IEC FDIS 23090-15:2024(en)
6.7.11 Bitstreams for Main 12 4:4:4 Intra profile . 89
6.7.12 Bitstreams for Main 12 4:4:4 Still Picture profile . 89
6.7.13 Bitstreams for Main 16 4:4:4 profile . 89
6.7.14 Bitstreams for Main 16 4:4:4 Intra profile . 90
6.7.15 Bitstreams for Main 16 4:4:4 Still Picture profile . 90

© ISO/IEC 2024 – All rights reserved
iv
ISO/IEC FDIS 23090-15:2024(en)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical activity.
ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations,
governmental and non-governmental, in liaison with ISO and IEC, also take part in the work.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of document should be noted. This document was drafted in accordance with the editorial rules of the ISO/
IEC Directives, Part 2 (see www.iso.org/directives or www.iec.ch/members_experts/refdocs).
ISO and IEC draw attention to the possibility that the implementation of this document may involve the
use of (a) patent(s). ISO and IEC take no position concerning the evidence, validity or applicability of any
claimed patent rights in respect thereof. As of the date of publication of this document, ISO and IEC had not
received notice of (a) patent(s) which may be required to implement this document. However, implementers
are cautioned that this may not represent the latest information, which may be obtained from the patent
database available at www.iso.org/patents and https://patents.iec.ch. ISO and IEC shall not be held
responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www.iso.org/iso/foreword.html.
In the IEC, see www.iec.ch
...

ISO/IEC FDIS 23090-15:202x(E, 2nd Ed.)
ISO/IEC JTC 1/SC 29/WG 5 N 185 (r)
Secretariat: JISC
Date: 2023-09-292024-03-25
Information technology — Coded representation of immersive
media —
Part 15:
Conformance testing for versatile video coding
Technologies de l'information — Représentation codée de média immersifs —
Partie 15: Essai de conformité pour le codage vidéo polyvalent
FDIS stage
|
ISO/IEC FDIS 23090-15:202x(E, 2nd Ed.)2024(en)
© ISO/IEC 20232024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication
may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying,
or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO
at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
EmailE-mail: [e-mail]
Website: www.iso.orgwww.iso.org
Published in Switzerland
ii © ISO/IEC 2023 – All rights reserved
© ISO/IEC 2024 – All rights reserved
ii
ISO/IEC FDIS 23090-15:202x(E, 2nd Ed.)2024(en)
Contents
Foreword . v
1 Scope .1
2 Normative references .1
3 Terms and definitions .1
4 Abbreviated terms .2
5 Conventions .4
6 Conformance testing for ITU-T H.266 | ISO/IEC 23090-3 .4
6.1 General .4
6.2 Bitstream conformance .5
6.3 Decoder conformance .5
6.4 Procedure to test bitstreams .5
6.5 Procedure to test decoder conformance .5
6.5.1 Conformance bitstreams .5
6.5.2 Contents of the bitstream file .6
6.5.3 Requirements on output of the decoding process and timing .6
6.5.4 Static tests for output order conformance .6
6.5.5 Dynamic tests for output timing conformance .7
6.5.6 Decoder conformance test for a particular profile, tier, and level .8
6.6 Specification of the test bitstreams .8
6.6.1 General .8
6.6.2 Test bitstreams – Coding tools for Main 10 profile with 4:2:0 chroma format and 10 bit depth .8
6.6.3 Test bitstreams – High-level syntax features for Main 10 profile with 4:2:0 chroma format and 10 bit
depth 42
6.6.4 Test bitstreams – Additional chroma formats and bit depths for Main 10 profile . 57
6.6.5 Test bitstreams – Coding tools for Main 10 4:4:4 profile for 4:4:4 chroma format and 10 bit depth57
6.6.6 Test bitstreams – Additional chroma formats and bit depths for Main 10 4:4:4 profile . 62
6.6.7 Test bitstreams – Multilayer Main 10 profile . 67
6.6.8 Test bitstreams – Multilayer Main 10 4:4:4 profile . 69
6.6.9 Test bitstreams – Main 10 Still Picture profile . 69
6.6.10 Test bitstreams – Main 10 4:4:4 Still Picture profile . 70
6.6.11 Test bitstreams – Main 12 profile . 70
6.6.12 Test bitstreams – Main 12 Intra profile . 71
6.6.13 Test bitstreams – Main 12 Still Picture profile . 71
6.6.14 Test bitstreams – Main 12 4:4:4 profile . 71
6.6.15 Test bitstreams – Main 12 4:4:4 Intra profile . 77
6.6.16 Test bitstreams – Main 12 4:4:4 Still Picture profile . 79
© ISO/IEC 2023 – All rights reserved iii
© ISO/IEC 2024 – All rights reserved
iii
ISO/IEC FDIS 23090-15:202x(E, 2nd Ed.)2024(en)
6.6.17 Test bitstreams – Main 16 4:4:4 profile . 81
6.6.18 Test bitstreams – Main 16 4:4:4 Intra profile . 90
6.6.19 Test bitstreams – Main 16 4:4:4 Still Picture profile . 91
6.7 Conformance test suites for Rec. ITU-T H.266 | ISO/IEC 23090-3 . 94
6.7.1 Bitstreams for Main 10 profile . 94
6.7.2 Bitstreams for Main 10 4:4:4 profile . 99
6.7.3 Bitstreams for Multilayer Main 10 profile . 100
6.7.4 Bitstreams for Multilayer Main 10 4:4:4 profile . 100
6.7.5 Bitstreams for Main 10 Still Picture profile . 100
6.7.6 Bitstreams for Main 10 4:4:4 Still Picture profile . 101
6.7.7 Bitstreams for Main 12 profile . 101
6.7.8 Bitstreams for Main 12 Intra profile . 101
6.7.9 Bitstreams for Main 12 Still Picture profile . 101
6.7.10 Bitstreams for Main 12 4:4:4 profile . 101
6.7.11 Bitstreams for Main 12 4:4:4 Intra profile . 102
6.7.12 Bitstreams for Main 12 4:4:4 Still Picture profile . 102
6.7.13 Bitstreams for Main 16 4:4:4 profile . 102
6.7.14 Bitstreams for Main 16 4:4:4 Intra profile . 103
6.7.15 Bitstreams for Main 16 4:4:4 Still Picture profile . 103

iv © ISO/IEC 2023 – All rights reserved
© ISO/IEC 2024 – All rights reserved
iv
ISO/IEC FDIS 23090-15:202x(E, 2nd Ed.)2024(en)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are members
of ISO or IEC participate in the development of International Standards through technical committees
established by the respective organization to deal with particular fields of technical activity. ISO and IEC
technical committees collaborate in fields of mutual interest. Other international organizations, governmental
and non-governmental, in liaison with ISO and IEC, also take part in the work.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of
document should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC
Directives, Part 2 (see www.iso.org/directiveswww.iso.org/directives or
www.iec.ch/members_experts/refdocswww.iec.ch/members_experts/refdocs).
Attention is drawnISO and IEC draw attention to the possibility that some of the elementsimplementation of
this document may beinvolve the subjectuse of (a) patent(s). ISO and IEC take no position concerning the
evidence, validity or applicability of any claimed patent rights. in respect thereof. As of the date of publication
of this document, ISO and IEC had not received notice of (a) patent(s) which may be required to implement
this document. However, implementers are cautioned that this may not represent the latest information,
which may be obtained from the patent database available at www.iso.org/patents and https://patents.iec.ch.
ISO and IEC shall not be held responsible for identifying any or all such patent rights. Details of any patent
rights identified during the development of the document will be in the Introduction and/or on the ISO list of
patent declarations received (see www.iso.org/patents) or the IEC list of patent declarations received (see
https://patents.iec.ch).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www.iso.org/iso/foreword.html.
In the IEC, see www.iec.ch/understanding-standards.
This document was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology,
Subcommittee SC 29, Coding of audio, picture, multimedia and hypermedia information, in collaboration with
ITU-T Study Group 16 (as Rec. ITU-T H.266.1).
This second edition cancels and replaces the first edition of (ISO/IEC 23090-15,:2022), which has been
technically revised. Relative to the previous (first) edition, the primary
The main changes in this edition are to addas follows:
— addition of bitstreams for the 12-bit and 16-bit profiles that were added in the second edition of ISO/IEC
23090-3. This second edition of ISO/IEC 23090-15 corresponds to the 09/2023 edition of :2022Rec. ITU-
T H.266.1.
A list of all parts in the ISO/IEC 23090 series can be found on the ISO and IEC websites.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html and www.iec.ch/national-
committees.
© ISO/IEC 2023 – All rights reserved v
© ISO/IEC 2024 – All rights reserved
v
FINAL DRAFT INTERNATIONAL STANDARD
ISO/IEC FDIS 23090-15:202x(E, 2nd Ed.)

Information technology — Coded representation of immersive
media —
Part 15:
Conformance testing for versatile video coding
1 Scope
This document specifies a set of tests and procedures designed to indicate whe
...