Fibre-reinforced plastic composites — Determination of plain-pin bearing strength

This International Standard specifies a procedure for determining the plain-pin bearing strength of fibre-reinforced plastic composites. The method described in this International Standard is applicable to fibre-reinforced plastic composites with either thermoset or thermoplastic matrices.

Composites plastiques renforcés de fibres — Détermination de la résistance au matage au moyen d'une goupille ordinaire

General Information

Status
Published
Publication Date
24-Feb-2013
Current Stage
9092 - International Standard to be revised
Completion Date
10-Jan-2024
Ref Project

Buy Standard

Standard
ISO 12815:2013 - Fibre-reinforced plastic composites -- Determination of plain-pin bearing strength
English language
13 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 12815
First edition
2013-03-01
Fibre-reinforced plastic
composites — Determination of
plain-pin bearing strength
Composites plastiques renforcés de fibres — Détermination de la
résistance au matage au moyen d’une goupille ordinaire
Reference number
ISO 12815:2013(E)
©
ISO 2013

---------------------- Page: 1 ----------------------
ISO 12815:2013(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 12815:2013(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus . 3
5.1 Test machine. . 3
6 Test specimens. 4
6.1 Shape and dimensions . 4
6.2 Preparation of specimens . 5
6.3 Checking the test specimens . 5
7 Number of test specimens . 6
8 Conditioning . 6
9 Procedure. 6
9.1 Test conditions . 6
9.2 Specimen and pin dimensions . 6
9.3 Testing speed . 6
9.4 Data collection .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.