ISO 8065:2024
(Main)Composites and reinforcements fibres — Mechanoluminescent visualization method of crack propagation for joint evaluation
Composites and reinforcements fibres — Mechanoluminescent visualization method of crack propagation for joint evaluation
This document applies to the measurement of crack tip position and crack propagation on the bonding surface of carbon fibre reinforced plastic (CFRPs) and metal assemblies bonded panels. This document does not apply to the visualization measurement of strain distribution or defects during load application to specimens. This document does not intend to: a) omit relevant field tests for CFRP related engineering; b) generally specify the dimensions of test specimen to represent CFRPs related bonded or fastened structures; c) superimpose test results for specific applications of the parameters that exceed the range of this document.
Composites et fibres de renforts — Méthode de visualisation mécanoluminescente de la propagation des fissures pour l'évaluation des assemblages
General Information
Buy Standard
Standards Content (Sample)
International
Standard
ISO 8065
First edition
Composites and reinforcements
2024-05
fibres — Mechanoluminescent
visualization method of crack
propagation for joint evaluation
Composites et fibres de renforts — Méthode de visualisation
mécanoluminescente de la propagation des fissures pour
l'évaluation des assemblages
Reference number
ISO 8065:2024(en) © ISO 2024
---------------------- Page: 1 ----------------------
ISO 8065:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
© ISO 2024 – All rights reserved
ii
---------------------- Page: 2 ----------------------
ISO 8065:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Specimen preparation . . 2
5.1 Specimen .2
5.2 Surface pre-treatment .2
5.3 Preparation for mechanoluminescence paint .2
5.4 Method of applying mechanoluminescence paint .2
5.5 Post-treatment .2
5.6 Scale labelling on specimen .2
6 Test equipment and testing procedure . . 4
6.1 Measurement equipment for mechanoluminescence .4
6.2 Test conditions .4
6.3 Recording conditions of mechanoluminescence .5
7 Data analysis .
...
International
Standard
ISO 8065
First edition
Composites and reinforcements
fibres — Mechanoluminescent
visualization method of crack
propagation for joint evaluation
Composites et fibres de renforts — Méthode de visualisation
mécanoluminescente de la propagation des fissures pour
l'évaluation des assemblages
PROOF/ÉPREUVE
Reference number
ISO 8065:2024(en) © ISO 2024
---------------------- Page: 1 ----------------------
ISO 8065:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
PROOF/ÉPREUVE
© ISO 2024 – All rights reserved
ii
---------------------- Page: 2 ----------------------
ISO 8065:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Specimen preparation . . 2
5.1 Specimen .2
5.2 Surface pre-treatment .2
5.3 Preparation for mechanoluminescence paint .2
5.4 Method of applying mechanoluminescence paint .2
5.5 Post-treatment .2
5.6 Scale labelling on specimen .2
6 Test equipment and testing procedure . . 4
6.1 Measurement equipment for mechanoluminescence .4
6.2 Test conditions .4
6.3 Recording conditions of mechanoluminescence .5
7 Data analysis .
...
Style Definition
ISO/DISPRF 8065:2023(E) .
Formatted: Font: 14 pt, Bold, Font color: Auto
ISO /TC 61/SC 13/WG 7
Formatted: Right: 1.5 cm, Bottom: 1 cm, Gutter: 0 cm,
Section start: New page, Header distance from edge:
Date: 2023-02-11
1.27 cm, Footer distance from edge: 1.27 cm
Secretariat: JISC Formatted: Font: 14 pt, Bold, Font color: Auto
Formatted: zzCover large
Date: 2024-04-05
Formatted
...
Formatted: Cover Title_A1
Composites and reinforcements fibres — Mechanoluminescent
visualization method of crack propagation for joint evaluation
Composites et fibres de renforts — Méthode de visualisation mécanoluminescente de la propagation des fissures
pour l'évaluation des assemblages
PROOF
---------------------- Page: 1 ----------------------
ISO/DISPRF 8065:2023(E2024(en) Formatted: Font: 11 pt, Bold, Font color: Auto
Formatted: Font: Bold
Formatted: HeaderCentered
© ISO 20232024
Formatted: Font: 11 pt, Bold, Font color: Auto
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication Formatted: Font: 11 pt, Bold, Font color: Auto
may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying,
Formatted: Default Paragraph Font
or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO
Formatted: Adjust space between Latin and Asian text,
at the address below or ISO’s member body in the country of the requester.
Adjust space between Asian text and numbers
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
Formatted: French (Switzerland)
EmailE-mail: copyright@iso.org
Formatted: French (Switzerland)
Website: www.iso.orgwww.iso.org
Formatted: French (Switzerland)
Published in Switzerland
Formatted: FooterPageRomanNumber
ii © ISO 2023 – All rights reserved
© ISO 2024 – All rights reserved
ii
---------------------- Page: 2 ----------------------
ISO/DISPRF 8065:2023(E2024(en) Formatted: Font: 11 pt, Bold, Font color: Auto
Formatted: HeaderCentered, Left
Formatted: Font: 11 pt, Bold, Font color: Auto
Contents
Formatted: Font: 11 pt, Bold, Font color: Auto
Formatted: Font: Bold
Foreword . v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Specimen preparation . 2
5.1 Specimen . 2
5.2 Surface pre-treatment . 2
5.3 Preparation for mechanoluminescence paint . 3
5.4 Method of applying mechanoluminescence paint . 3
5.5 Post-treatment . 3
5.6 Scale labelling on specimen . 3
6 Test equipment and testing procedure . 5
6.1 Measurement equipment for mechanoluminescence . 5
6.2 Test conditions . 7
6.3 Recording conditions of mechanoluminescence .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.