Fire protection — Automatic sprinkler system — Part 9: Requirements and test methods for water mist nozzles

ISO 6182-9:2005 specifies performance requirements, test methods and marking requirements for water mist nozzles.

Protection contre l'incendie — Systèmes d'extinction automatiques du type sprinkler — Partie 9: Prescriptions et méthodes d'essai des ajutages (brouillard)

General Information

Status
Published
Publication Date
26-Oct-2005
Current Stage
9020 - International Standard under periodical review
Start Date
15-Jan-2024
Completion Date
15-Jan-2024
Ref Project

Buy Standard

Standard
ISO 6182-9:2005 - Fire protection -- Automatic sprinkler system
English language
60 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 6182-9
First edition
2005-11-01


Fire protection — Automatic sprinkler
system —
Part 9:
Requirements and test methods for water
mist nozzles
Protection contre l'incendie — Systèmes d'extinction automatiques du
type sprinkler —
Partie 9: Prescriptions et méthodes d'essai des ajutages (brouillard)




Reference number
ISO 6182-9:2005(E)
©
ISO 2005

---------------------- Page: 1 ----------------------
ISO 6182-9:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2005
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2005 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 6182-9:2005(E)
Contents Page
Foreword. v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions. 2
4 Product consistency. 5
5 General requirements. 5
5.1 Materials . 5
5.2 Prevention of field adjustment . 5
5.3 Drawing review. 5
5.4 Pipe and fitting threads. 5
5.5 Strainers and filters . 5
6 Elastomeric materials. 6
6.1 Properties . 6
6.2 Test specimen . 6
7 Water mist nozzle requirements. 7
7.1 Dimensions. 7
7.2 Nominal operating temperatures . 7
7.3 Operating temperatures . 7
7.4 Water flow and distribution and dropl
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.