ISO 6162-1:2002/Cor 1:2004
(Corrigendum)Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 1: Flange connectors for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 - Technical Corrigendum 1
Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 1: Flange connectors for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 - Technical Corrigendum 1
Transmissions hydrauliques — Raccordements à bride avec demi-brides ou bride monobloc et vis métriques ou en inches — Partie 1: Raccordements à bride pour utilisation à des pressions de 3,5 MPa (35 bar) à 35 MPa (350 bar), DN 13 à DN 127 — Rectificatif technique 1
Fluidna tehnika – Hidravlika – Prirobnični priključki z dvodelnimi ali enodelnimi prirobničnimi objemkami in metrskimi ali colskimi vijaki – 1. del: Prirobnični priključki za uporabo pri 3,5 MPa (35 bar) do 35 MPa (350 bar), DN 13 do DN 127 – Tehnični popravek 1
General Information
Relations
Frequently Asked Questions
ISO 6162-1:2002/Cor 1:2004 is a corrigendum published by the International Organization for Standardization (ISO). Its full title is "Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 1: Flange connectors for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 - Technical Corrigendum 1". This standard covers: Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 1: Flange connectors for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 - Technical Corrigendum 1
Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 1: Flange connectors for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 - Technical Corrigendum 1
ISO 6162-1:2002/Cor 1:2004 is classified under the following ICS (International Classification for Standards) categories: 23.100.40 - Piping and couplings. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 6162-1:2002/Cor 1:2004 has the following relationships with other standards: It is inter standard links to ISO 8980-1:2017, ISO 6162-1:2002, ISO 6162-1:2012; is excused to SIST ISO 6162-1:2003, ISO 6162-1:2002. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase ISO 6162-1:2002/Cor 1:2004 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of ISO standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 1: Flange connectors for use at pressures of 3, 5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 - Technical Corrigendum 123.100.40Cevna napeljava in sklopkePiping and couplings21.040.01Navoji na splošnoScrew threads in generalICS:Ta slovenski standard je istoveten z:ISO 6162-1:2002/Cor 1:2004SIST ISO 6162-1:2003/TC 1:2005en01-november-2005SIST ISO 6162-1:2003/TC 1:2005SLOVENSKI
STANDARD
ICS
23.100.40 Ref. No. ISO 6162-1:2002/Cor.1:2004(E)©
ISO 2004 – All rights reserved Published in Switzerland
INTERNATIONAL STANDARD ISO 6162-1:2002 TECHNICAL CORRIGENDUM 1 Published 2004-11-01 INTERNATIONAL ORGANIZATION FOR S
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...