ISO/IEC 23090-16:2022

Information technology — Coded representation of immersive media — Part 16: Reference software for versatile video coding

This document establishes a reference software for Rec. ITU-T H.266 | ISO/IEC 23090-3. NOTE The use of this reference software is not required for making an implementation of an encoder or decoder in conformance to Rec. ITU-T H.266 | ISO/IEC 23090-3. Requirements established in Rec. ITU-T H.266 | ISO/IEC 23090-3 take precedence over the behaviour of the reference software.

Technologies de l'information — Représentation codée de média immersifs — Partie 16: Logiciel de référence pour le codage vidéo polyvalent (VCC)

General Information

• Status: Published
• Publication Date: 23-Oct-2022
• ICS: 35.040.40 - Coding of audio, video, multimedia and hypermedia information
• Technical Committee: ISO/IEC JTC 1/SC 29 - Coding of audio, picture, multimedia and hypermedia information
• Drafting Committee: ISO/IEC JTC 1/SC 29/WG 5 - MPEG Joint Video Coding Team(s) with ITU-T SG 16
• Current Stage: 6060 - International Standard published
• Start Date: 24-Oct-2022
• Due Date: 02-Jul-2022
• Completion Date: 24-Oct-2022

Standards Content (Sample)

INTERNATIONAL ISO/IEC
STANDARD 23090-16
First edition
2022-10
Information technology — Coded
representation of immersive media —
Part 16:
Reference software for versatile video
coding
Technologies de l'information — Représentation codée de média
immersifs —
Partie 16: Logiciel de référence pour le codage vidéo polyvalent (VCC)
Reference number
ISO/IEC 23090-16:2022(E)
© ISO/IEC 2022

---------------------- Page: 1 ----------------------
ISO/IEC 23090-16:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
  © ISO/IEC 2022 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 23090-16:2022(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Abbreviated terms . 2
5 Conventions . 2
6 Reference software for Rec. ITU-T H.266 | ISO/IEC 23090-3 . 2
iii
© ISO/IEC 2022 – All rights reserved

---------------------- Page: 3 ----------------------
ISO/IEC 23090-16:2022(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical
activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international
organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the
work.
The procedures used to develop this document and those intended for its further maintenance
are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria
needed for the different types of document should be noted. This document was drafted in
accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives or
www.iec.ch/members_experts/refdocs).
Attention is drawn to the possibility that some of the elements of this document may be the subject
of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent
rights. Details of any patent rights identified during the development of the document will be in the
Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents) or the IEC
list of patent declarations received (see https://patents.iec.ch).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see
www.iso.org/iso/foreword.html. In the IEC, see www.iec.ch/understanding-standards.
This document was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology,
Subcommittee SC 29, Coding of audio, picture, multimedia and hypermedia information, in collaboration
with ITU-T (as Rec. ITU-T H.266.2).
A list of all parts in the ISO/IEC 23090 series can be found on the ISO and IEC websites.
Any feedback or questions on this document should be directed to the user’s national standards
body. A complete listing of these bodies can be found at www.iso.org/members.html and
www.iec.ch/national-committees.
iv
  © ISO/IEC 2022 – All rights reserved

---------------------- Page: 4 ----------------------
ISO/IEC 23090-16:2022(E)
Introduction
This document provides reference software for Rec. ITU-T H.266 | ISO/IEC 23090-3. The reference
software includes both encoder and decoder functionality.
Reference software is useful in aiding users of a video coding standard to establish and test conformance
and interoperability, and to educate users and demonstrate the capabilities of the standard. For these
purposes, the accompanying software is provided as an aid for the study and implementation of Rec.
ITU-T H.266 | ISO/IEC 23090-3 Versatile video coding.
The software has been jointly developed by the ITU-T Visual Coding Experts Group (VCEG, Question
6 of ITU-T Study Group 16) and the ISO/IEC Moving Picture Experts Group (MPEG Joint Video Coding
Team with ITU-T SG 16, Working Group 5 of Subcommittee 29 of ISO/IEC Joint Technical Committee 1).
0.1  Purpose
The purpose of this document is to provide the following:
— Reference decoder software capable of decoding bitstreams that conform to Rec. ITU-T H.266 |
ISO/IEC 23090-3 in a manner that conforms to the decoding process specified in Rec. ITU-T H.266 |
ISO/IEC 23090-3.
— Reference encoder software capable of producing bitstreams that conform to Rec. ITU-T H.266 |
ISO/IEC 23090-3.
0.2  Examples of use
Some examples of uses that can be appropriate for the reference decoder software are as follows:
— As an illustration of how to perform the decoding process specified in Rec. ITU
...