ISO 16311-2:2014

Maintenance and repair of concrete structures — Part 2: Assessment of existing concrete structures

ISO 16311-2:2014 describes general requirements and procedures for the assessment of concrete structures. The assessment can be initiated under the following circumstances, but not limited to: a) an anticipated change in use or extension of design service life; b) structural deterioration due to time-dependent actions such as corrosion of reinforcement, fatigue, etc.; c) safety and/or serviceability check (e.g. for earthquake and increased traffic actions) as required by authorities, insurance companies, owners, etc.; d) structural damage by accidental actions. (See ISO 2394.) This part of ISO 16311 does not cover qualification of personnel, contractual matters, and health and safety requirements for the protection of workers during the investigation and testing.

Entretien et réparation des structures en béton — Partie 2: Évaluation des structures en béton existantes

General Information

• Status: Withdrawn
• Publication Date: 06-Apr-2014
• ICS: 91.100.30 - Concrete and concrete products
• Technical Committee: ISO/TC 71/SC 7 - Maintenance and repair of concrete structures
• Drafting Committee: ISO/TC 71/SC 7 - Maintenance and repair of concrete structures
• Current Stage: 9599 - Withdrawal of International Standard
• Completion Date: 21-Mar-2024

Relations

• Revised: ISO 16311-2:2024 - Maintenance and repair of concrete structures — Part 2: Assessment of existing concrete structures
• Effective Date: 23-Apr-2020

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 16311-2
First edition
2014-04-15
Maintenance and repair of concrete
structures —
Part 2:
Assessment of existing concrete
structures
Entretien et réparation des structures en béton —
Partie 2: Évaluation des structures en béton existantes
Reference number
ISO 16311-2:2014(E)
©
ISO 2014

---------------------- Page: 1 ----------------------
ISO 16311-2:2014(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2014 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 16311-2:2014(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Framework of assessment . 4
4.1 General . 4
4.2 Personnel . 4
4.3 Objectives of assessment . 6
4.4 Scenarios . 6
4.5 Preliminary and detailed assessment . 6
4.6 Reporting results of assessment .10
4.7 Judgement and decision .10
4.8 Intervention .10
5 Site and laboratory investigation and data collection .10
5.1 General .10
5.2 Planning and execution of inspection and data collection .10
5.3 Registration of condition .11
6 Evaluation and verification .13
6.1 Evaluation of action .
...