Steel for the reinforcement of concrete — Determination of strength of joints in welded fabric

The test method is based on placing and centring a test piece so that the pulling wire can move freely (the pulling wire shall be supported in such a way that it will not bend; the rate of stress increase in the pulling wire shall not exceed 10 MPa/s) and recording the maximum force during the test and the location of the fracture.

Acier à béton pour armatures passives — Détermination de la résistance des joints des treillis soudés

General Information

Status
Withdrawn
Publication Date
09-Dec-1992
Withdrawal Date
09-Dec-1992
Current Stage
9599 - Withdrawal of International Standard
Completion Date
25-Jul-2002
Ref Project

Relations

Buy Standard

Standard
ISO 10287:1992 - Steel for the reinforcement of concrete -- Determination of strength of joints in welded fabric
English language
2 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 10287:1992 - Acier a béton pour armatures passives -- Détermination de la résistance des joints des treillis soudés
French language
2 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 10287:1992 - Acier a béton pour armatures passives -- Détermination de la résistance des joints des treillis soudés
French language
2 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL
ISO
STANDARD
10287
First edition
1992-12-15
Steel for the reinforcement of concrete -
Determination of strength of joints in
welded fabric
Acier a b&on pour armatures passives - Dhtermina tion de Ia rhstance
des joints des treillis soudh
Reference number
ISO 10287: 1992(E)

---------------------- Page: 1 ----------------------
ISO 10287:1992(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 10287 was prepared by Technical Committee
ISOTTC 17, Stee/, Sub-Committee SC 16, Steels for the reinforcement and
prestressing of concrete.
0 ISO 1992
All rights reserved. No part of this publication may be reproduced or utilized in any form or
by any means, electronie or mechanical, including photocopying and microfilm, without per-
mission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-l 211 Geneve 20 l Switzerland
Printed in Switzerland
ii

---------------------- Page: 2 ----------------------
ISO 10287:1992(E)
INTERNATIONAL STANDARD
Steel for the reinforcement of concrete -
Determination of strength of joints in welded fabric
1 Scope
This International Standard specifies a test method for
determining the strength of welded joints in welded
I-- Crossing wire
fabric for the reinforcement of concrete structures.
2 Normative reference
The following Standard contains provisions which,
through reference in this text, constitute provisions
of this International Standard. At the time of publi-
cation, the edition indicated was valid. All Standards
are subject to revision, and Parties to agreements
based on this International Standard ar
...

NORME ISO
INTE’RNATIONALE 10287
Premiére édition
1992-12-15
Acier à béton pour armatures passives -
Détermination de la résistance des joints
des treillis soudés
- Determination of strength of
Steel for the reinforcement of concrete
joints in welded fabric
Numéro de référence
ISO 10287: 1992(F)

---------------------- Page: 1 ----------------------
ISO 10287:1992(F)
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération
mondiale d’organismes nationaux de normalisation (comités membres de
I’ISO). L’élaboration des Normes internationales est en général confiée aux
comités techniques de I’ISO. Chaque comité membre intéressé par une
étude a le droit de faire partie du comité technique creé à cet effet. Les
organisations internationales, gouvernementales et non gouvernemen-
tales, en liaison avec I’ISO participent également aux travaux. LYS0 colla-
bore étroitement avec la Commission électrotechnique internationale (CEI)
en ce qui concerne la normalisation électrotechnique.
Les projets de Normes internationales adoptés par les comités techniques
sont soumis aux comités membres pour vote. Leur publication comme
Normes internationales requiert l’approbation de 75 % au moins des co-
mités membres votants.
La Norme internationale ISO 10287 a été élaborée par le comité technique
ISO/TC 17, Acier, sous-comité SC 16, Aciers pour le renforcement et /a
précontrainte du béton.
0 ISO 1992
Droits de reproduction réservés. Aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie et les microfilms, sans l’accord écrit de l’éditeur.
Organisation internationale de normalisation
Case Postale 56 l CH-1 211 Genève 20 l Suisse
Imprimé en Suisse
ii

---------------------- Page: 2 ----------------------
NORME INTERNATIONALE ISO 10287:1992(F)
Acier à béton pour armatures passives -
Détermination de la résistance des joints des treillis
soudés
Des porte-échantillons autres que celui de la figure 1
1 Domaine d’application
peuvent être utilisés, notamment des dispositifs qui
empêchent le fil croisé de tourner.
La présente Norme internationale prescrit une mé-
thode d’essai pour déterminer la résistance des joints
soudés des treillis soudes pour armatures passives
pour béton.
Fil croise
r t
I
2 Référence normative
La norme suivante contient des dispositions qui, par
I
suite de la référence qui en est faite, constituent des
dispositions valables pour la présente Norme interna-
-i
tionale. Au moment de la publica
...

NORME ISO
INTE’RNATIONALE 10287
Premiére édition
1992-12-15
Acier à béton pour armatures passives -
Détermination de la résistance des joints
des treillis soudés
- Determination of strength of
Steel for the reinforcement of concrete
joints in welded fabric
Numéro de référence
ISO 10287: 1992(F)

---------------------- Page: 1 ----------------------
ISO 10287:1992(F)
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération
mondiale d’organismes nationaux de normalisation (comités membres de
I’ISO). L’élaboration des Normes internationales est en général confiée aux
comités techniques de I’ISO. Chaque comité membre intéressé par une
étude a le droit de faire partie du comité technique creé à cet effet. Les
organisations internationales, gouvernementales et non gouvernemen-
tales, en liaison avec I’ISO participent également aux travaux. LYS0 colla-
bore étroitement avec la Commission électrotechnique internationale (CEI)
en ce qui concerne la normalisation électrotechnique.
Les projets de Normes internationales adoptés par les comités techniques
sont soumis aux comités membres pour vote. Leur publication comme
Normes internationales requiert l’approbation de 75 % au moins des co-
mités membres votants.
La Norme internationale ISO 10287 a été élaborée par le comité technique
ISO/TC 17, Acier, sous-comité SC 16, Aciers pour le renforcement et /a
précontrainte du béton.
0 ISO 1992
Droits de reproduction réservés. Aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie et les microfilms, sans l’accord écrit de l’éditeur.
Organisation internationale de normalisation
Case Postale 56 l CH-1 211 Genève 20 l Suisse
Imprimé en Suisse
ii

---------------------- Page: 2 ----------------------
NORME INTERNATIONALE ISO 10287:1992(F)
Acier à béton pour armatures passives -
Détermination de la résistance des joints des treillis
soudés
Des porte-échantillons autres que celui de la figure 1
1 Domaine d’application
peuvent être utilisés, notamment des dispositifs qui
empêchent le fil croisé de tourner.
La présente Norme internationale prescrit une mé-
thode d’essai pour déterminer la résistance des joints
soudés des treillis soudes pour armatures passives
pour béton.
Fil croise
r t
I
2 Référence normative
La norme suivante contient des dispositions qui, par
I
suite de la référence qui en est faite, constituent des
dispositions valables pour la présente Norme interna-
-i
tionale. Au moment de la publica
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.