Glass in building — Laminated glass and laminated safety glass — Part 2: Laminated safety glass

This document specifies performance requirements for laminated safety glass as defined in ISO 12543-1. NOTE Any defects that are found in installed laminated safety glass are dealt with in ISO 12543-6.

Verre dans la construction — Verre feuilleté et verre feuilleté de sécurité — Partie 2: Verre feuilleté de sécurité

La présente partie de l’ISO 12543 spécifie les exigences de performance du verre feuilleté de sécurité définies dans l’ISO 12543‑1. NOTE Les défauts qui apparaissent sur du verre feuilleté de sécurité employé dans des installations sont présentés dans l’ISO 12543‑6.

General Information

Status
Published
Publication Date
14-Dec-2021
Current Stage
6060 - International Standard published
Start Date
15-Dec-2021
Due Date
11-Sep-2021
Completion Date
15-Dec-2021
Ref Project

Relations

Buy Standard

Draft
ISO/FDIS 12543-2 - Glass in building -- Laminated glass and laminated safety glass
English language
5 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 12543-2
ISO/TC 160/SC 1
Glass in building — Laminated glass
Secretariat: BSI
and laminated safety glass —
Voting begins on:
2021-07-30
Part 2:
Voting terminates on:
Laminated safety glass
2021-09-24
Verre dans la construction — Verre feuilleté et verre feuilleté de
sécurité —
Partie 2: Verre feuilleté de sécurité
ISO/CEN PARALLEL PROCESSING
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 12543-2:2021(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
©
NATIONAL REGULATIONS. ISO 2021

---------------------- Page: 1 ----------------------
ISO/FDIS 12543-2:2021(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/FDIS 12543-2:2021(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Impact resistance . 1
5 Durability of laminated safety glass . 2
5.1 High-temperature tests. 2
5.1.1 General. 2
5.1.2 Short high temperature test . 2
5.1.3 Long high temperature test . 2
5.2 Humidity test . 2
5.3 Radiation test . 3
6 Durability of fire-resistant laminated safety glass . 3
6.1 General . 3
6.2 Humidity test for glass not normally exposed to direct solar radiation . 3
6.3 Tests for glass normally exposed to direct solar radiation . 3
6.3.1 Humidity test . 3
6.3.2 Radiation test . 4
7 Component parts . 4
8 Dimensions and edge finishing . 4
9 Acoustic properties test . 4
10 Appearance . 4
11 Designation . 4
Bibliography . 5
© ISO 2021 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO/FDIS 12543-2:2021(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 160, Glass in building, Subcommittee
SC 1, Product considerations, in collaboration with the European Committee for Standardization (CEN)
Technical Committee CEN/TC 129, Glass in building, in accordance with the Agreement on technical
cooperation between ISO and CEN (Vienna Agreement).
This third edition cancels and replaces the second edition (ISO 12543-2:2021), which has been
technically revised.
The main changes compared to the previous edition are as follows:
— editorial changes have been made;
— definitions have been moved to ISO 12543-1;
— the clause on high temperature tests has been revised.
A list of all parts in the ISO 12543 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
iv © ISO 2021 – All rights reserved

---------------------- Page: 4 ----------------------
FINAL DRAFT INTERNATIONAL STANDARD ISO/FDIS 12543-2:2021(E)
Glass in building — Laminated glass and laminated safety
glass —
Part 2:
Laminated safety glass
1 Scope
This document specifies performance requirements for laminated safety glass as defined in ISO 12543-1.
NOTE Any defects that are found in installed laminated safety glass are dealt with in ISO 12543-1.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 12543-1, Glass in building — Laminated g
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.