ISO 12543-6:2021

Glass in building — Laminated glass and laminated safety glass — Part 6: Appearance

This document specifies defects of finished sizes and test methods with regard to the appearance of laminated glass and laminated safety glass when looking through the glass. All references to laminated glass in this document refer to both laminated glass and laminated safety glass. NOTE Special attention is paid to acceptability criteria in the vision area. This document is applicable to finished sizes at the time of supply.

Verre dans la construction — Verre feuilleté et verre feuilleté de sécurité — Partie 6: Aspect

Ce document spécifie les défauts de dimension des produits finis et les méthodes d’essai relatives à l’aspect du verre feuilleté et du verre feuilleté de sécurité par observation au travers du vitrage. Toutes les références au verre feuilleté dans ce document se rapportent au verre feuilleté et au verre feuilleté de sécurité NOTE Une attention particulière est portée aux critères d’acceptabilité dans la zone visible. Ce document s’applique aux dimensions du produit fini au moment de la livraison.

General Information

• Status: Published
• Publication Date: 14-Dec-2021
• ICS: 81.040.20 - Glass in building
• Technical Committee: ISO/TC 160/SC 1 - Product considerations
• Drafting Committee: ISO/TC 160/SC 1/WG 3 - Laminated glass
• Current Stage: 6060 - International Standard published
• Start Date: 15-Dec-2021
• Due Date: 11-Sep-2021
• Completion Date: 15-Dec-2021

Relations

• Consolidates: ISO/IEC 7810:2019 - Identification cards — Physical characteristics
• Effective Date: 06-Jun-2022
• Revises: ISO 12543-6:2011/Cor 1:2012 - Glass in building — Laminated glass and laminated safety glass — Part 6: Appearance — Technical Corrigendum 1
• Effective Date: 03-Mar-2018
• Revises: ISO 12543-6:2011 - Glass in building — Laminated glass and laminated safety glass — Part 6: Appearance
• Effective Date: 03-Mar-2018

Standards Content (Sample)

FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 12543-6
ISO/TC 160/SC 1
Glass in building — Laminated glass
Secretariat: BSI
and laminated safety glass —
Voting begins on:
2021-07-30
Part 6:
Voting terminates on:
Appearance
2021-09-24
Verre dans la construction — Verre feuilleté et verre feuilleté de
sécurité —
Partie 6: Aspect
ISO/CEN PARALLEL PROCESSING
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 12543-6:2021(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
©
NATIONAL REGULATIONS. ISO 2021

---------------------- Page: 1 ----------------------
ISO/FDIS 12543-6:2021(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/FDIS 12543-6:2021(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Method of observation . 3
5 Vents . 3
6 Creases and streaks . 3
7 Defects in the vision area . 3
7.1 Spot defects in the vision area . 3
7.2 Linear defects in the vision area . 4
8 Defects in the edge area . 4
8.1 Framed edges . 4
8.2 Unframed edges . 4
9 Laminated glass incorporating thermally treated glasses . 4
Annex A (informative) Method of observation of glasses by pack (for jumbos or stock sizes) .5
© ISO 2021 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO/FDIS 12543-6:2021(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 160, Glass in building Subcommittee
SC 1, Product considerations, in collaboration with the European Committee for Standardization (CEN)
Technical Committee CEN/TC 129, Glass in building, in accordance with the Agreement on technical
cooperation between ISO and CEN (Vienna Agreement).
This third edition cancels and replaces the second edition (ISO 12543-6:2011), which has been
technically revised.
The main changes compared to the previous edition are as follows:
— some definitions have been revised;
— a paragraph on laminated glass incorporating thermally treated glasses has been added;
— a method of observation of glasses by pack for jumbos or stock sizes has been added.
A list of all parts in the ISO 12543 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
iv © ISO 2021 – All rights reserved

---------------------- Page: 4 ----------------------
FINAL DRAFT INTERNATIONAL STANDARD ISO/FDIS 12543-6:2021(E)
Glass in
...