Earth-moving machinery -- Hydraulic breakers -- Terminology and commercial specifications

This document establishes the terminology and content of commercial specifications for hydraulic breakers which are mounted as an attachment on a carrier, typically earth-moving machinery such as an excavator, backhoe loader, skid steer loader, and compact loader as defined in ISO 6165; or mounted on a rig, pedestal boom system, demolition robot, etc., at the end of an arm. Hydraulic breakers are typically used to demolish or break rock, concrete, brickwork, asphalt, etc. This document does not cover breakers powered by pneumatic, thermomechanical, or electromagnetic energy. This document does not cover portable or hand-held breakers either.

Engins de terrassement -- Brise-roche hydrauliques -- Terminologie et spécifications commerciales

General Information

Status
Published
Publication Date
05-Nov-2020
Current Stage
5060 - Close of voting Proof returned by Secretariat
Start Date
10-Oct-2020
Completion Date
09-Oct-2020
Ref Project

Buy Standard

Standard
ISO 16417:2020 - Earth-moving machinery -- Hydraulic breakers -- Terminology and commercial specifications
English language
10 pages
sale 15% off
Preview
sale 15% off
Preview
Draft
ISO/FDIS 16417:Version 24-apr-2020 - Earth-moving machinery -- Hydraulic breakers -- Terminology and commercial specifications
English language
10 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (sample)

INTERNATIONAL ISO
STANDARD 16417
First edition
2020-11
Earth-moving machinery — Hydraulic
breakers — Terminology and
commercial specifications
Engins de terrassement — Brise-roche hydrauliques — Terminologie
et spécifications commerciales
Reference number
ISO 16417:2020(E)
ISO 2020
---------------------- Page: 1 ----------------------
ISO 16417:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
---------------------- Page: 2 ----------------------
ISO 16417:2020(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 1

3 Terms and definitions ..................................................................................................................................................................................... 1

4 Types and classifications ............................................................................................................................................................................. 6

5 Nomenclature .......................................................................................................................................................................................................... 7

6 Commercial specifications ......................................................................................................................................................................... 8

6.1 Manufacturer’s information ........................................................................................................................................................ 8

6.2 Product information ........................................................................................................................................................................... 9

Bibliography .............................................................................................................................................................................................................................10

© ISO 2020 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO 16417:2020(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www .iso .org/ patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to the

World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/

iso/ foreword .html.

This document was prepared by Technical Committee ISO/TC 127, Earth-moving machinery,

Subcommittee SC 4, Terminology, commercial nomenclature, classification and ratings.

Any feedback or questions on this document should be directed to the user’s national standards body. A

complete listing of these bodies can be found at www .iso .org/ members .html.
iv © ISO 2020 – All rights reserved
---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD ISO 16417:2020(E)
Earth-moving machinery — Hydraulic breakers —
Terminology and commercial specifications
1 Scope

This document establishes the terminology and content of commercial specifications for hydraulic

breakers which are mounted as an attachment on a carrier, typically earth-moving machinery such as

an excavator, backhoe loader, skid steer loader, and compact loader as defined in ISO 6165; or mounted

on a rig, pedestal boom system, demolition robot, etc., at the end of an arm.

Hydraulic breakers are typically used to demolish or break rock, concrete, brickwork, asphalt, etc.

This document does not cover breakers powered by pneumatic, thermomechanical, or electromagnetic

energy. This document does not cover portable or hand-held breakers either.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.

ISO and IEC maintain terminological databases for use in standardization at the following addresses:

— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at http:// www .electropedia .org/
3.1
carrier

mobile or stationary machinery that provides power and a range of motion for the mounted item

Note 1 to entry: Mobile machinery is typically an excavator, backhoe loader, skid steer loader, or compact loader.

Stationary machinery is typically a pedestal boom system, demolition robot, etc.
3.2
attachment

assembly of components that can be mounted onto the carrier (3.1) for specific use

[SOURCE: ISO 6746-2:2003, 3.5, modified — The term “base machine and equipment” has been replaced

with “carrier”.]
3.3
hydraulic breaker

percussive hydraulic attachment (3.2) used for breaking up concrete, rock, brickwork, asphalt, etc.

3.3.1 Accumulator
3.3.1.1
hydraulic accumulator

pressure storage reservoir that enables a hydraulic system to cope with extremes of demand and to

smooth out pulsations
© ISO 2020 – All rights reserved 1
---------------------- Page: 5 ----------------------
ISO 16417:2020(E)
3.3.1.2
piston accumulator

energy storage chamber charged with nitrogen into which the upper end of the piston (3.3.8)

reciprocally projects and which imparts stored energy onto the upper surface area of the piston to

assist with piston acceleration
3.3.2
back head

device that closes the upper end of the cylinder and has a space into which the upper end of the piston

(3.3.8) reciprocally projects
3.3.3
bracket
side plate

device that supports the power cell (3.3.7) which includes mounting holes to either bolt on to the carrier

(3.1) mounting adapter (3.3.11) or to connect directly to the mounting flange holes on the carrier

3.3.4
tool

device that transmits the impact energy of the reciprocating piston (3.3.8) to the material to be broken

3.3.5
front head

device that attaches to the lower end of the cylinder to guide and support the tool (3.3.4)

3.3.6
housing

device that encloses the power cell (3.3.7) on all sides and has mounting holes or is connected to the

carrier (3.1) with a mounting adapter (3.3.11)

Note 1 to entry: Types of housings can be side-mount open, top-mount open, side-mount closed, and top-

mount closed.
Note 2 to entry: The refer
...

DRAFT INTERNATIONAL STANDARD
ISO/DIS 16417
ISO/TC 127/SC 4 Secretariat: UNI
Voting begins on: Voting terminates on:
2020-01-20 2020-04-13
Earth-moving machinery — Hydraulic Breakers —
Terminology and commercial specifications —
Part :
Terminology and commercial specifications
ICS: 01.040.53; 53.100
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
This document is circulated as received from the committee secretariat.
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 16417:2020(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. ISO 2020
---------------------- Page: 1 ----------------------
ISO/DIS 16417:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/DIS 16417:2020(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 1

3 Terms and definitions ..................................................................................................................................................................................... 1

4 Types and classifications ............................................................................................................................................................................. 5

5 Nomenclature .......................................................................................................................................................................................................... 6

6 Commercial specifications ......................................................................................................................................................................... 7

6.1 Manufacturer’s information ........................................................................................................................................................ 7

6.2 Product information ........................................................................................................................................................................... 8

Bibliography ................................................................................................................................................................................................................................ 9

© ISO 2020 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO/DIS 16417:2020(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www .iso .org/ patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to the

World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/

iso/ foreword .html.

This document was prepared by Technical Committee ISO/TC 127, Earth-moving machinery,

Subcommittee SC 4, Terminology, commercial nomenclature, classification and ratings.

Any feedback or questions on this document should be directed to the user’s national standards body. A

complete listing of these bodies can be found at www .iso .org/ members .html.
iv © ISO 2020 – All rights reserved
---------------------- Page: 4 ----------------------
DRAFT INTERNATIONAL STANDARD ISO/DIS 16417:2020(E)
Earth-moving machinery — Hydraulic Breakers —
Terminology and commercial specifications —
Part :
Terminology and commercial specifications
1 Scope

This document establishes the terminology and content of commercial specifications for hydraulic

breakers which are mounted as an attachment on a carrier, typically earth-moving machinery such as

an excavator, backhoe loader, skid steer loader, and compact loader as defined in ISO 6165; or mounted

on a rig, pedestal boom system, demolition robot, etc., at the end of an arm.

Hydraulic breakers are typically used to demolish or break rock, concrete, brickwork, asphalt, etc.

This document does not cover breakers powered by pneumatic, thermomechanical, or electromagnetic

energy. This document also does not cover portable or hand-held breakers.
2 Normative references

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments) applies.

ISO 6165, Earth-moving machinery — Basic types — Identification and terms and definitions

3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.

ISO and IEC maintain terminological databases for use in standardization at the following addresses:

— ISO Online browsing platform: available at http:// www .iso .org/ obp
— IEC Electropedia: available at http:// www .electropedia .org/
3.1
carrier

machine, typically an excavator, backhoe loader, skid steer loader, compact loader, rig, pedestal boom

system, demolition robot, etc
3.2
attachment
assembly of components that can be mounted onto the carrier for specific use

Note 1 to entry: Attachments for hydraulic excavators normally are the working tool attached to the

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.