Nanotechnologies — Vocabulary — Part 9: Nano-enabled electrotechnical products and systems

IEC TS 80004-9: 2017(E) specifies terms and definitions for electrotechnical products and systems reliant on nanomaterials for their essential functionalities. It is intended to facilitate communications between organizations and individuals in industry and those who interact with them.

Nanotechnologies — Vocabulaire — Partie 9: Produits et systèmes électrotechniques nanotechnologiques

General Information

Status
Published
Publication Date
28-Feb-2017
Technical Committee
Current Stage
9093 - International Standard confirmed
Completion Date
10-Jun-2021
Ref Project

Relations

Buy Standard

Technical specification
IEC/TS 80004-9:2017 - Nanotechnologies -- Vocabulary
English language
6 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

IEC TS 80004-9
Edition 1.0 2017-01
TECHNICAL
SPECIFICATION
Nanotechnologies – Vocabulary –
Part 9: Nano-enabled electrotechnical products and systems
IEC TS 80004-9:2017-01(en)
---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2017 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form

or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from

either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC

copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or

your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC

The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes

International Standards for all electrical, electronic and related technologies.
About IEC publications

The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the

latest edition, a corrigenda or an amendment might have been published.
IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org

The stand-alone application for consulting the entire The world's leading online dictionary of electronic and

bibliographical information on IEC International Standards, electrical terms containing 20 000 terms and definitions in

Technical Specifications, Technical Reports and other English and French, with equivalent terms in 15 additional

documents. Available for PC, Mac OS, Android Tablets and languages. Also known as the International Electrotechnical

iPad. Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary

The advanced search enables to find IEC publications by a 65 000 electrotechnical terminology entries in English and

variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of

committee,…). It also gives information on projects, replaced IEC publications issued since 2002. Some entries have been

and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and

CISPR.
IEC Just Published - webstore.iec.ch/justpublished

Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc

details all new publications released. Available online and If you wish to give us your feedback on this publication or

also once a month by email. need further assistance, please contact the Customer Service

Centre: csc@iec.ch.
---------------------- Page: 2 ----------------------
IEC TS 80004-9
Edition 1.0 2017-01
TECHNICAL
SPECIFICATION
Nanotechnologies – Vocabulary –
Part 9: Nano-enabled electrotechnical products and systems
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 07.120 ISBN 978-2-8322-3765-6

Warning! Make sure that you obtained this publication from an authorized distributor.

---------------------- Page: 3 ----------------------
– 2 – IEC TS 80004-9:2017 © IEC 2017
CONTENTS

FOREWORD ........................................................................................................................... 3

INTRODUCTION ..................................................................................................................... 5

1 Scope .............................................................................................................................. 6

2 Normative references ...................................................................................................... 6

3 Terms and definitions ...................................................................................................... 6

3.1 General terms related to nano-enabled electrotechnical products and

systems .................................................................................................................. 6

3.2 Terms related to nano-enabled photovoltaics and thin-film organic

electronics .............................................................................................................. 8

3.3 Terms related to luminescent nanomaterials ........................................................... 9

Alphabetical index................................................................................................................. 10

Bibliography .......................................................................................................................... 11

---------------------- Page: 4 ----------------------
IEC TS 80004-9:2017 © IEC 2017 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
NANOTECHNOLOGIES – VOCABULARY –
Part 9: Nano-enabled electrotechnical products and systems
FOREWORD

1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

all national electrotechnical committees (IEC National Committees). The object of IEC is to promote

international co-operation on all questions concerning standardization in the electrical and electronic fields. To

this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,

Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC

Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested

in the subject dealt with may participate in this preparatory work. International, governmental and non-

governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely

with the International Organization for Standardization (ISO) in accordance with conditions determined by

agreement between the two organizations.

2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international

consensus of opinion on the relevant subjects since each technical committee has representation from all

interested IEC National Committees.

3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC

Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any

misinterpretation by any end user.

4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications

transparently to the maximum extent possible in their national and regional publications. Any divergence

between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in

the latter.

5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity

assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any

services carried out by independent certification bodies.

6) All users should ensure that they have the latest edition of this publication.

7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and

members of its technical committees and IEC National Committees for any personal injury, property damage or

other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and

expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC

Publications.

8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is

indispensable for the correct application of this publication.

9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of

patent rights. IEC shall not be held responsible for identifying any or all such patent rights.

The main task of IEC technical committees is to prepare International Standards. In

exceptional circumstances, a technical committee may propose the publication of a technical

specification when

• the required support cannot be obtained for the publication of an International Standard,

despite repeated efforts, or

• the subject is still under technical development or where, for any other reason, there is the

future but no immediate possibility of an agreement on an International Standard.

Technical Specifications are subject to review within three years of publication to decide

whether they can be transformed into International Standards.

IEC TS 80004-9, which is a Technical Specification, has been prepared by IEC technical

committee 113: Nanotechnology for electrotechnical products and systems, in co-operation

with ISO technical committee 229: Nanotechnologies.
It is published as a double logo Technical Specification.
---------------------- Page: 5 ----------------------
– 4 – IEC TS 80004-9:2017 © IEC 2017
The text of this standard is based on the following documents:
Enquiry draft Report on voting
113/315/DTS 113/335/RVC

Full information on the voting for the approval of this Technical Specification can be found in

the report on voting indicated in the above table. In ISO, the Technical Specification has been

approved by 23 P members out of 37 having cast a vote.

This document has been drafted in accordance with the ISO/IEC Directives, Part 2.

A list of all parts of the 80004 Technical Specification, published under the general title

Nanotechnologies – Vocabulary, can be found on the IEC website.

The committee has decided that the contents of this document will remain unchanged until the

stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to

the specific document. At this date, the document will be
• transformed into an International Standard,
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.
---------------------- Page: 6 ----------------------
IEC TS 80004-9:2017 © IEC 2017 – 5 –
INTRODUCTION

Nanotechnology advances have profound implications in all branches of engineering and

science and have a noticeable impact on established industries by introducing technological

innovation. Within the electrotechnical industry, nanotechnologies play an important role as

regards the miniaturization and the integration of electronic components as well as the

fabrication of electrical devices with novel functionalities and improved performances.

There is a substantial investment in research that will bring development and wide diffusion of

new nanomaterials, devices and systems. Example
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.