kSIST FprEN 15542:2023

Ductile iron pipes, fittings and accessories - External cement mortar coating for pipes - Requirements and test methods

This document defines the requirements and test methods applicable to factory applied cement mortar coatings for the external corrosion protection of ductile iron pipes conforming to EN 545, EN 598 and EN 969 for use at operating temperatures up to 50 °C.
NOTE   Coatings according to this document are suitable for soils of all common corrosion loads and trenchless applications.
Special activities on site such as joint protection, tapping, clamping, etc. could affect the corrosion protection properties of the cement mortar coating. These operations should be covered in the laying instructions supplied by the manufacturers of pipes, clamps, house connection saddles, etc. and any relevant users' procedures. Such instructions are not part of this document.

Rohre, Formstücke und Zubehör aus duktilem Gusseisen - Zementmörtelumhüllung von Rohren - Anforderungen und Prüfverfahren

Dieses Dokument legt die Anforderungen und Prüfverfahren fest für werkseitig aufgebrachte Zementmörtelumhüllungen für den äußeren Korrosionsschutz von Rohren aus duktilem Gusseisen nach EN 545, EN 598 und EN 969 für die Verwendung bei Betriebstemperaturen bis 50 °C.
ANMERKUNG   Umhüllungen nach diesem Dokument sind für alle Böden mit üblichen Korrosionslasten und für graben¬lose Anwendungen geeignet.
Spezielle vor Ort durchgeführte Maßnahmen, wie z. B. Schutz der Verbindungen, Anbohren, Herstellen von Klemmverbindungen usw., können die Korrosionsschutzeigenschaften der Zementmörtelumhüllung beeinflussen. Diese Arbeiten sollten in den Einbauanleitungen der Hersteller von Rohren, Klemmelementen, Hausanschlussstücken usw. und allen einschlägigen Arbeitsanleitungen für den Anwender angegeben sein. Diese Anleitungen sind nicht Teil dieses Dokuments.

Tuyaux, raccords et accessoires en fonte ductile - Revêtement extérieur en mortier de ciment pour tuyaux - Prescriptions et méthodes d'essais

Le présent document établit les prescriptions et les méthodes d’essai applicables aux revêtements en mortier de ciment appliqués en usine pour protéger de la corrosion extérieure les tuyaux en fonte ductile conformes à l’EN 545, l’EN 598 et l’EN 969 et destinés à être utilisés à des températures de service allant jusqu’à 50 °C.
NOTE   Les revêtements selon le présent document sont adaptés aux sols de toutes les applications en milieu corrosif et sans tranchée courantes.
Des activités particulières effectuées sur le site telles que la protection des joints, le taraudage, le bridage etc. peuvent avoir une incidence sur les propriétés de protection contre la corrosion du revêtement en mortier de ciment. Il convient de faire figurer ces opérations dans les instructions relatives à la pose fournies par les fabricants de tuyaux, brides et piquages à selle pour branchements domestiques etc. ainsi que dans les procédures pertinentes des utilisateurs. Ces instructions ne font pas partie intégrante du présent document.

Cevi, fitingi in pribor iz duktilne železove litine - Zunanje prevleke cevi iz cementne malte - Zahteve in preskusne metode

General Information

• Status: Not Published
• Public Enquiry End Date: 02-Feb-2022
• ICS: 23.040.01 - Pipeline components and pipelines in general
• ICS: 23.040.10 - Iron and steel pipes
• ICS: 23.040.40 - Metal fittings
• Technical Committee: TLP - Pressure vessels
• Current Stage: 5020 - Formal vote (FV) (Adopted Project)
• Start Date: 23-Oct-2023
• Due Date: 11-Dec-2023
• Completion Date: 20-Nov-2023
• Ref Project: FprEN 15542 - Ductile iron pipes, fittings and accessories - External cement mortar coating for pipes - Requirements and test methods

Relations

• Revises: SIST EN 15542:2008 - Ductile iron pipes, fittings and accessories - External cement mortar coating for pipes - Requirements and test methods
• Effective Date: 01-Jan-2022

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 15542:2022
01-januar-2022
Cevi, fitingi in pribor iz duktilne železove litine - Zunanje prevleke cevi iz cementne
malte - Zahteve in preskusne metode
Ductile iron pipes, fittings and accessories - External cement mortar coating for pipes -
Requirements and test methods
Rohre, Formstücke und Zubehör aus duktilem Gusseisen - Zementmörtelumhüllung von
Rohren - Anforderungen und Prüfverfahren
Tuyaux, raccords et accessoires en fonte ductile - Revêtement extérieur en mortier de
ciment pour tuyaux - Prescriptions et méthodes d'essais
Ta slovenski standard je istoveten z: prEN 15542
ICS:
23.040.10 Železne in jeklene cevi Iron and steel pipes
23.040.40 Kovinski fitingi Metal fittings
oSIST prEN 15542:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 15542:2022

---------------------- Page: 2 ----------------------
oSIST prEN 15542:2022


DRAFT
EUROPEAN STANDARD
prEN 15542
NORME EUROPÉENNE

EUROPÄISCHE NORM

December 2021
ICS 23.040.01 Will supersede EN 15542:2008
English Version

Ductile iron pipes, fittings and accessories - External
cement mortar coating for pipes - Requirements and test
methods
Tuyaux, raccords et accessoires en fonte ductile - Rohre, Formstücke und Zubehör aus duktilem
Revêtement extérieur en mortier de ciment pour Gusseisen - Zementmörtelumhüllung von Rohren -
tuyaux - Prescriptions et méthodes d'essais Anforderungen und Prüfverfahren
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 203.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 15542:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 15542:2022
prEN 15542:2021 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Ordering information . 7
5 Technical requirements . 7
5.1 Zinc or zinc alloy coating . 7
5.2 Fresh cement mortar layer thickness. 7
5.3 Pipe ends .
...