SIST EN 4491:2014
(Main)Aerospace series - Non-metallic materials - Anaerobic polymerisable compounds - Threadlocking - Torque strength 16 Nm
Aerospace series - Non-metallic materials - Anaerobic polymerisable compounds - Threadlocking - Torque strength 16 Nm
This European Standard specifies the requirements relating to anaerobic polymerisable threadlocking compounds having a torque strength of 16 Nm for aerospace applications.
Luft- und Raumfahrt - Nichtmetallische Werkstoffe - Anaerobe polymerisierbare Klebstoffe - Schraubensicherung - Torsionsfestigkeit 16 Nm
Diese Norm legt die Anforderungen an anaerobe polymerisierbare Klebstoffe zur Gewindesicherung mit einer Torsionsfestigkeit von 16 Nm zur Anwendung in der Luft- und Raumfahrt fest.
Série aérospatiale - Matériaux non-métalliques - Composé polymérisable anaérobie - Agent de freinage - Résistance au couple de torsion 16 Nm
La présente Norme européenne spécifie les exigences relatives aux composés polymérisables anaérobies avec agent de freinage ayant une résistance au couple de torsion de 16 Nm pour les applications aérospatiales.
Aeronavtika - Nekovinski materiali - Anaerobne polimerizirajoče zmesi - Zavarovanje vijakov - Navorna trdnost 16 Nm
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Nichtmetallische Werkstoffe - Anaerobe polymerisierbare Klebstoffe - Schraubensicherung - Torsionsfestigkeit 16 NmSérie aérospatiale - Matériaux non-métalliques - Composé polymérisable anaérobie - Agent de freinage - Résistance au couple de torsion 16 NmAerospace series - Non-metallic materials - Anaerobic polymerisable compounds - Threadlocking - Torque strength 16 Nm49.025.50LepilaAdhesivesICS:Ta slovenski standard je istoveten z:EN 4491:2013SIST EN 4491:2014en01-februar-2014SIST EN 4491:2014SLOVENSKI
STANDARD
SIST EN 4491:2014
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4491
January 2013 ICS 49.025.50 English Version
Aerospace series - Non-metallic materials - Anaerobic polymerisable compounds - Threadlocking - Torque strength 16 Nm
Série aérospatiale - Matériaux non-métalliques - Composé polymérisable anaérobie - Agent de freinage - Résistance au couple de torsion 16 Nm
Luft- und Raumfahrt - Nichtmetallische Werkstoffe - Anaerobe polymerisierbare Klebstoffe - Schraubensicherung - Torsionsfestigkeit 16 Nm This European Standard was approved by CEN on 10 November 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4491:2013: ESIST EN 4491:2014
EN 4491:2013 (E) 2 Contents Page Foreword .3 Introduction .4 1 Scope .5 2 Normative references .5 3 Terms, definitions, symbols and abbreviations .5 4 Requirements .6
SIST EN 4491:2014
EN 4491:2013 (E) 3 Foreword This document (EN 4491:2013) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2013, and conflicting national standards shall be withdrawn at the latest by July 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 4491:2014
EN 4491:2013 (E) 4 Introduction T
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.