Aerospace series - Non-metallic materials - Structural adhesive systems - Paste adhesive - Technical specification

This European Standard defines the requirements for manufacture, qualification, inspection and testing of products in structural adhesive systems where the adhesive is supplied in the form of a paste, either a one-part or two-part system, for aerospace applications. The adhesive may be used in conjunction with a primer whose requirements are also included in this European Standard. It is applicable whenever referenced on a material standard.

Luft- und Raumfahrt - Nichtmetallische Werkstoffe - Strukturelle Klebstoffsysteme - Klebstoffpasten - Technische Lieferbedingungen

Diese Europäische Norm legt die Anforderungen für die Herstellung, Qualifikation und Prüfung von Produkten in strukturellen Klebstoffsystemen fest, bei denen der Klebstoff in Form einer Paste vorliegt, entweder als Ein- oder Zweikomponentensystem, zur Anwendung in der Luft- und Raumfahrt. Der Klebstoff kann in Verbindung mit einem Haftgrundmittel verwendet werden, für den die Anforderungen ebenfalls in dieser Norm enthalten sind. Sie ist immer dann anzuwenden, wenn in einer Werkstoffnorm auf sie verwiesen wird.

Série aérospatiale - Matériaux non-métalliques - Systèmes d’adhésifs structuraux - Adhésif en pâte - Spécification technique

La présente Norme européenne définit les exigences relatives à la fabrication, la qualification, le contrôle et les essais de produits dans les systèmes d’adhésifs structuraux, systèmes en une seule ou en deux parties, lorsque l’adhésif est fourni sous forme de pâte, pour les applications aérospatiales. L’adhésif peut être utilisé conjointement avec le primaire dont les exigences sont aussi incluses dans la présente Norme européenne. Elle s’applique chaque fois qu’elle est citée en référence dans une norme de matériau.

Aeronavtika - Nekovinski materiali - Strukturni adhezivni sistemi - Sistemi za lepljenje struktur - Tehnična specifikacija

General Information

Status
Published
Publication Date
02-Jan-2014
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
23-Dec-2013
Due Date
27-Feb-2014
Completion Date
03-Jan-2014

Buy Standard

Standard
EN 4106:2014
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Nichtmetallische Werkstoffe - Strukturelle Klebstoffsysteme - Klebstoffpasten - Technische LieferbedingungenSérie aérospatiale - Matériaux non-métalliques - Systèmes d’adhésifs structuraux - Adhésif en pâte - Spécification techniqueAerospace series - Non-metallic materials - Structural adhesive systems - Paste adhesive - Technical specification49.025.50LepilaAdhesivesICS:Ta slovenski standard je istoveten z:EN 4106:2013SIST EN 4106:2014en01-februar-2014SIST EN 4106:2014SLOVENSKI
STANDARD



SIST EN 4106:2014



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4106
January 2013 ICS 49.025.50 English Version
Aerospace series - Non-metallic materials - Structural adhesive systems - Paste adhesive - Technical specification
Série aérospatiale - Matériaux non-métalliques - Systèmes d'adhésifs structuraux - Adhésif en pâte - Spécification technique
Luft- und Raumfahrt - Nichtmetallische Werkstoffe - Strukturelle Klebstoffsysteme - Klebstoffpasten - Technische Lieferbedingungen This European Standard was approved by CEN on 10 November 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4106:2013: ESIST EN 4106:2014



EN 4106:2013 (E) 2 Contents Page Foreword .3 Introduction .4 1 Scope .5 2 Normative references .5 3 Terms, definitions, symbols and abbreviations .6 4 Requirements .7 5 Qualification . 10 6 Release testing . 11 7 Preparation for delivery . 14 8 Declaration of conformity . 15
SIST EN 4106:2014



EN 4106:2013 (E) 3 Foreword This document (EN 4106:2013) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2013, and conflicting national standards shall be withdrawn at the latest by July 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
SIST EN 4106:2014



EN 4106:2013 (E) 4 Introduction This standard is part of the series of EN non-metallic materials standards for aerospace applications. The general organisation of this series is described in EN 4385. This document is a level 3 document as defined in EN 4385. It has been prepared in accordance with EN 4387. SIST EN 4106:2014



EN 4106:2013 (E) 5 1 Scope This European Standard defines the requirements for manufacture, qualification, inspection and testing of products in structural adhesive systems where the adhesive is supplied in the form of a paste, either a one-part or two-part system, for aerospace applications. The adhesive may be used in conjunction with a primer whose requirements are also included in this European Standard. It is applicable whenever referenced on a material standard. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 542, Adhesives — Determination of density EN 924, Adhesives — Solvent-borne and solvent-free adhesives — Determination of flashpoint EN 2243-1, Aerospace series — Non-metallic materials — Structural adhesives — Test methods — Part 1: Single lap shear EN 2243-2, Aerospace series — Non-metallic materials — Structural adhesives — Test method — Part 2: Peel metal-metal EN 2243-6, Aerospace series — Non-metallic materials — Structural adhesives — Test method — Part 6: Determination of shear stress and shear strain
EN 2379, Aerospace series — Fluids for assessment of non-metallic materials 1) EN 2757, Aerospace series — Structural adhesives system — Test method — Determination of the drying and ignition residues of primers EN 2781, Aerospace series — Non-metallic materials — Structural adhesives — Test methods — Determination of the primer thickness EN 4385, Aerospace series — Non-metallic materials — General organisation of standardisation — Links between types of standards 1) EN 4387, Aerospace series — Non-metallic materials — Rules for drafting and presentation of technical specifications 1) EN 6040, Aerospace series — Non-metallic materials — Test method — Analysis of thermoset systems by High Performance Liquid Chromatography (HPLC) 1) EN 6041, Aerospace series — Non-metallic materials — Test method — Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC) 1) EN 6042, Aerospace series — Organic compounds — Test method — Analysis by infrared spectroscopy 1) EN 6064, Aerospace series — Non-metallic materials — Analysis of non-metallic materials (cured) for the determination of the extent of cure by Differential Scanning Calorimetry (DSC) 1)
1) Published as ASD-STAN Prestandard at the date of publication of this standard (www.asd-stan.org). SIST EN 4106:2014



EN 4106:2013 (E) 6 EN 9100, Quality Management Systems — Requirements for Aviation, Space and Defence Organizations EN 9133, Aerospace series — Quality management systems — Qualification procedure for aerospace standard parts EN 12092, Adhesives — Determination of viscosity ISO Guide 22, General criteria for supplier’s declaration of conformity ISO 3768:1976, Metallic coatings — Neutral salt spray test (NSS test) ESA PSS-01-702, A thermal vacuum test for the screening of space materials TR 7000-6, Aerospace series — Non-metallic materials — Rules for the drafting and presentation of material standards — Part 6: Structural adhesive systems 2) 3 Terms, definitions, symbols and abbreviations For the purposes of this document, the terms, definitions, symbols and abbreviations given in EN 9100, EN 9133, TR 7000-6 and the following, apply. 3.1 batch quantity of adhesive material which is homogenous and has been manufactured from a single mix of each of its individual ingredients in one continuous production run 3.2 product in this document the word product refers to all forms of paste adhesive, either a single component or comprised of two parts 3.3 adhesive system combination of a paste adhesive and primer 3.4 adhesive material any paste or primer of which an adhesive system may be composed 3.5 filler inorganic material incorporated in an adhesive to improve its cure rheology and service performance 3.6 corrosion inhibitor substance added to the primer to improve its corrosion inhibiting characteristics
2) Published as ASD-STAN Technical Report at the date of publication of this standard (www.asd-stan.org). SIST EN 4106:2014



EN 4106:2013 (E) 7 3.7 primer material used to coat the substrates prior to the application of adhesive to improve either the durability of the joint or adhesion characteristics and/or to protect a pre-treated metal surface prior to bonding, so allowing an increased period of handling Note 1 to entry: Standard adhesive primers for adhesive systems consist of solvents and polymers. Note 2 to entry: Corrosion inhibiting adhesive primers for adhesive systems consist of solvents, polymers and solid inhibitors. The solid inhibitors reduce corrosion of the substrate. 3.8 shelf life period of time during which the adhesive material when stored in accordance with the specified conditions shall meet the specified property requirements 3.9 shop life maximum cumulative period of time during which the adhesive material can be held out of refrigerated storage before commencement of cure 3.10 pot life period of time at room temperature during which a two part paste adhesive and/or a primer may be used, after mixing 3.11 lot consignment of adhesive material which is either whole or part of a batch 3.12 T min. minimum service temperature of the material 3.13 T max. maximum service temperature of the material 3.14 Tg glass transition temperature of the material 4 Requirements 4.1 General requirements 4.1.1 Manufacturing schedule for paste adhesive The product shall be manufactured to fulfil the requirements of the relevant material standard and this technical specification in accordance with EN 9133. The manufacturer shall define the raw material, processes and inspection requirements in a manufacturing schedule. Once approved any modifications to the manufacturing schedule shall be in accordance with EN 9133. 4.1.2 Traceability All products shall be traceable to the raw material batches at all stages of manufacture and delivery. Similarly, each raw material batch shall be traceable to all products at all stages of manufacture and delivery. SIST EN 4106:2014



EN 4106:2013 (E) 8 4.1.3 Freedom from defects All products shall be free from defects not complying with the requirements of the material standard or order and this technical specification, or which may be prejudicial to the subsequent manufacture and/or use of the products. Each primer component shall: a) be uniform in colour; b) be free from deleterious contamination, foreign matter or other defects; c) mix readily to a homogenous solution or suspension of consistency suitable for application; d) be free from lumps; e) not settle out or separate during a normal working day or the pot life, whichever is the shorter. The adhesive shall: 1) be uniform in colour; 2) be free from deleterious contamination, foreign matter or other defects; 3) be free from lumps. In the case of two part adhesives it shall also: i) mix readily to a homogenous solution or suspension of consistency suitable for application; ii) not settle out or separate during a normal working day or the pot life, whichever is the shorter. 4.1.4 Health and safety It is the responsibility of the supplier to establish satisfactory health and safety information to ensure conformity with any European, National or local laws/regulations. The safety data sheet shall be available and shall be provided prior to qualification testing. 4.1.5 Dimensions Not applicable. 4.2 Technical requirements 4.2.1 General The product shall satisfy the requirements of the relevant material standard and/or the order. 4.2.2 Required testing Unless otherwise specified in the material standard, the test method and the test frequency for screening, qualification testing and release testing are given in Table 3 to Table 7. The manufacturer, having regard for the provisions of EN 9133, shall implement a test programme under the supervision of the mandated body, on a minimum of three production batches of both the primer and the adhesive. SIST EN 4106:2014



EN 4106:2013 (E) 9 For the purposes of qualification a fixed combination of primer and adhesive, as defined in the material standard, shall be used throughout. Each pair of adhesive and primer involves a separate qualification programme. Alloys, surface preparation, test panel manufacturing, machining and conditioning before testing of test pieces shall conform to the requirements of the Material Standard. 4.2.3 Test samples Samples and associated test pieces shall be marked in such manner that their identity with respect to the product and the batch is maintained. Samples taken from fully finished products (condition of use) shall not be further processed. Samples representing products in a condition other than the condition o
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.