iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60674-3-1:2001/A1:2012

(Amendment)

Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors

Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors

Gives the requirements for biaxially oriented polypropylene film having a smooth or rough surface, corona treated when required for vacuum metallization. The films are for use as dielectric in capacitors.

Isolierfolien für elektrotechnische Zwecke - Teil 3: Anforderungen für einzelne Werkstoffe - Blatt 1: Biaxial orientierte Polypropylen-(PP)-Folien für Kondensatoren

Films plastiques à usages électriques - Partie 3: Spécifications pour matériaux particuliers - Feuille 1: Films de polypropylène biorienté (PP) pour condensateurs

Plastične folije za električne namene - 3. del: Specifikacije za posamezne materiale - 1. list: Dvoosno orientirana polipropilenska folija za kondenzatorje

Podaja zahteve za dvoosno orientirano polipropilensko folijo z gladko ali grobo površino, koronsko obdelano, kadar je to potrebno za vakuumsko metalizacijo. Folije se uporabljajo kot dielektriki v kondenzatorjih.

General Information

Status
Withdrawn
Publication Date
14-Nov-2011
Withdrawal Date
15-Oct-2024
ICS
29.035.20 - Plastics and rubber insulating materials
Technical Committee
IIZS - Insulating materials and systems
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
16-Oct-2024
Due Date
08-Nov-2024
Completion Date
16-Oct-2024
Ref Project
EN 60674-3-1:1998/A1:2011 - Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors

Relations

Replaced By
SIST EN IEC 60674-3-1:2021 - Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors (IEC 60674-3-1:2021)
Effective Date
07-Jun-2022
Replaced By
SIST EN IEC 60674-3-1:2021 - Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors (IEC 60674-3-1:2021)
Effective Date
05-Oct-2021
Amends
SIST EN 60674-3-1:2001 - Plastic films for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors
Effective Date
28-Jan-2023
Amends
SIST EN 60674-3-1:2001 - Plastic films for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors
Effective Date
07-Jun-2022
Amends
SIST EN 60674-3-1:2001 - Plastic films for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors
Effective Date
21-Sep-2010
Revised
SIST EN IEC 60674-3-1:2021 - Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors (IEC 60674-3-1:2021)
Effective Date
17-Dec-2019

Buy Standard

EN 60674-3-1:2001/A1:2012EN 60674-3-1:2001/A1:2012
PreviousNext
Amendment
EN 60674-3-1:2001/A1:2012
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-januar-2012
3ODVWLþQHIROLMH]DHOHNWULþQHQDPHQHGHO6SHFLILNDFLMH]DSRVDPH]QHPDWHULDOH
OLVW'YRRVQRRULHQWLUDQDSROLSURSLOHQVNDIROLMD]DNRQGHQ]DWRUMH
Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet
1: Biaxially oriented polypropylene (PP) film for capacitors
Isolierfolien für elektrotechnische Zwecke - Teil 3: Anforderungen für einzelne Werkstoffe
- Blatt 1: Biaxial orientierte Polypropylen-(PP)-Folien für Kondensatoren
Films plastiques à usages électriques - Partie 3: Spécifications pour matériaux
particuliers - Feuille 1: Films de polypropylène biorienté (PP) pour condensateurs
Ta slovenski standard je istoveten z: EN 60674-3-1:1998/A1:2011
ICS:
29.035.20 3ODVWLþQLLQJXPHQLL]RODFLMVNL Plastics and rubber insulating
PDWHULDOL materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60674-3-1/A1
NORME EUROPÉENNE
October 2011
EUROPÄISCHE NORM
ICS 29.035.20
English version
Plastic films for electrical purposes -
Part 3: Specifications for individual materials -
Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors
(IEC 60674-3-1:1998/A1:2011)
Films plastiques à usages électriques -  Isolierfolien für elektrotechnische Zwecke -
Partie 3: Spécifications pour matériaux Teil 3: Anforderungen für einzelne
particuliers - Werkstoffe -
Feuille 1: Films de polypropylène biorienté Blatt 1: Biaxial orientierte Polypropylen-
(PP) pour condensateurs (PP)-Folien für Kondensatoren
(CEI 60674-3-1:1998/A1:2011) (IEC 60674-3-1:1998/A1:2011)

This amendment A1 modifies the European Standard EN 60674-3-1:1998; it was approved by CENELEC on
2011-10-18. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60674-3-1:1998/A1:2011 E

Foreword
The text of document 15/596/CDV, future edition 1 of IEC 60674-3-1:1998/A1, prepared by IEC/TC 15,
"Solid electrical insulating materials", was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 60674-3-1:1998/A1:2011.

The following dates are fixed:
(dop) 2012-07-18
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2014-10-18
• latest date by which the national
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 60674-3-1:1998/A1:2011 was approved by CENELEC as a
European Standard without any modification.

- 3 - EN 60674-3-1:1998/A1:2011
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Add the following reference:
Publication Year Title EN/HD Year

ISO 11357-3 - Plastics - Differential scanning calorimetry - -
(DSC) -
Part 3: Determination of temperature and
enthalpy
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 60684-3-116:2024(Main)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 116 and 117: Extruded polychloroprene, general purpose (IEC 60684-3-116:2024)
EN IEC 60684-3-116:2024

This part of IEC 60684 gives the requirements for non-heat-shrinkable sleeving, extruded from
compounds based on polychloroprene elastomer. This sleeving has been found suitable for
temperatures up to 95 °C.
Sleeving of this type is normally available with internal diameters up to 25 mm, and in the
following opaque colours: black, brown, red, orange, yellow, green, blue, violet, grey, white and
pink. Sizes or colours other than those specifically listed in this document can possibly be
available as custom items. These items are considered to comply with this document if they
comply with the other property requirements listed in Table 2.
Materials which conform to this specification meet established levels of performance. However,
the selection of a material by a user for a specific application will be based on the actual
requirements necessary for adequate performance in the application and not based on the
specification alone.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60893-2:2024(Main)
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test (IEC 60893-2:2023)
EN IEC 60893-2:2023

This part of IEC 60893 describes methods of test for the materials defined in IEC 60893-1
(referred to also as Part 1).

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60674-3-7:2023(Main)
Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 7: Fluoroethylene-propylene (FEP) films used for electrical insulation (IEC 60674-3-7:2023)
EN IEC 60674-3-7:2023

This sheet of IEC 60674-3 gives the requirements for fluoroethylene-propylene (FEP) films used
for electrical insulation.
Materials which conform to this specification meet established levels of performance. However,
the selection of a material by a user for a specific application can be based on the actual
requirements necessary for adequate performance in that application and not based on this
specification alone.
Safety warning: It is the responsibility of the user of the methods contained or referred to in this
document to ensure that they are used in a safe manner

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60674-3-3:2023(Main)
Plastic films for electrical purposes - Part 3:Specifications for individual materials - Sheet 3: Polycarbonate (PC) films used for electrical insulation (IEC 60674-3-3:2023)
EN IEC 60674-3-3:2023

This sheet of IEC 60674-3 gives the requirements for polycarbonate films used for electrical
insulation.
Materials which conform to this specification meet established levels of performance. However,
the selection of a material by a user for a specific application can be based on the actual
requirements necessary for adequate performance in that application and not based on this
specification alone.
Safety warning: It is the responsibility of the user of the methods contained or referred to in this
document to ensure that they are used in a safe manner.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60674-3-4:2022(Main)
Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheets 4: Polyimide films used for electrical insulation (IEC 60674-3-4:2022)
EN IEC 60674-3-4:2022

This International Standard gives the requirements for polyimide films used for electrical purposes.
Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.
Safety warning: it is the responsibility of the user of the methods contained or referred to in this document to ensure that they are used in a safe manner.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60674-3-1:2021(Main)
Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors (IEC 60674-3-1:2021)
EN IEC 60674-3-1:2021

This sheet of IEC 60674-3 gives the requirements for biaxially oriented polypropylene film
having a smooth or rough surface, corona treated when required for vacuum metallization. The
films are for use as dielectric in capacitors.
Materials which conform to this specification meet established levels of performance. However,
the selection of a material by a user for a specific application is based on the actual
requirements necessary for adequate performance in that application and not based on this
specification alone.
Safety warning: It is the responsibility of the user of the methods contained or referred to in this
document to ensure that they are used in a safe manner

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60684-3-214:2019(Main)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 214: Heat-shrinkable, polyolefin sleeving, not flame retarded, thick and medium wall (IEC 60684-3-214:2019)
EN IEC 60684-3-214:2019

This document gives the requirements for two types of heat-shrinkable, polyolefin sleeving, not flame retarded, thick and medium wall with a nominal shrink ratio of 3:1. This sleeving has been found suitable for use at temperatures of up to 100 °C. • Type A: Medium wall - internal diameter up to 200 mm typically. • Type B: Thick wall - internal diameter up to 200 mm typically. These sleevings are normally supplied in colour black. Since these types of sleeving cover a significantly large range of sizes and wall thicknesses, Annex A (Tables A.1 and A.2) of this document provides a guide to the range of sizes available. The actual size will be agreed between the user and supplier. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application will be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60684-3-247:2019(Main)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 247: Heat-shrinkable, polyolefin sleeving, dual wall, not flame retarded, thick and medium wall (IEC 60684-3-247:2019)
EN IEC 60684-3-247:2019

This document gives the requirements for two types of heat-shrinkable, polyolefin sleeving, dual wall, not flame retarded with a nominal shrink ratio of 3:1. This sleeving has been found suitable for use at temperatures of up to 100 °C. • Type A: Medium wall, internal diameter up to 200,0 mm typically. • Type B: Thick wall, internal diameter up to 200,0 mm typically. These sleevings are normally supplied in colour black. Since these types of sleving cover a significantly large range of sizes and wall thicknesses, Annex A (Tables A.1 and A.2) provides a guide to the range of sizes available. The actual size will be agreed between the user and supplier. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application will be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60684-3-280:2019(Main)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking (IEC 60684-3-280:2019)
EN IEC 60684-3-280:2019

This document gives the requirements for heat-shrinkable, polyolefin sleeving, antitracking with a nominal shrink ratio of 3:1. This sleeving has been found suitable for use at temperatures up to 100 °C. Typically: medium wall, internal diameter up to 110 mm. This sleeving is normally supplied in the colours red or brown. Since these types of sleeving cover a significantly large range of sizes and wall thicknesses, Annex A (Table A.1) provides guidance on the range of sizes available. The actual size will be agreed between the user and the supplier. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application will be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. This sleeving is designed to be used in medium voltage cable accessories and as such electrical performance willbe proven as part of the assembly. Examples of this are described in HD 629.1 and IEC 60502 (all parts).

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60684-3-283:2019(Main)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 283: Heat-shrinkable, polyolefin sleeving for bus-bar insulation (IEC 60684-3-283:2019)
EN IEC 60684-3-283:2019

This document gives the requirements for two types of heat-shrinkable, polyolefin sleeving for bus-bar insulation, with a nominal shrink ratio of 2,5:1. This sleeving has been found suitable up to temperatures of 100 °C. • Type A: Medium wall - internal diameter up to 170,0 mm typically • Type B: Thick wall - internal diameter up to 165,0 mm typically These sleevings are normally supplied in colour, red or brown. Since these types of sleeving cover a significantly large range of sizes and wall thicknesses, Annex A (Tables A.1 and A.2) provides guidance to the range of sizes available.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day