SIST EN IEC 63013:2020/A1:2022

LED packages - Long-term luminous and radiant flux maintenance projection (IEC 63013:2017/AMD1:2021)

No scope available

LED-Packages - Langfristige Vorhersage des Lichtstromerhalts und des Erhalts der Strahlungsleistung (IEC 63013:2017/AMD1:2021)

LED encapsulées - Projection à long terme concernant la conservation du flux lumineux et du flux énergétique (IEC 63013:2017/AMD1:2021)

Ohišja svetlečih diod (LED) - Dolgoročni načrt vzdrževanja svetlobnega in sevalnega toka - Dopolnilo A1 (IEC 63013:2017/AMD1:2021)

General Information

• Status: Published
• Publication Date: 19-Dec-2021
• ICS: 29.140.99 - Other standards related to lamps
• Technical Committee: IESV - Lamps and related equipment
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 10-Dec-2021
• Due Date: 14-Feb-2022
• Completion Date: 20-Dec-2021
• Ref Project: EN IEC 63013:2019/A1:2021 - LED packages - Long-term luminous and radiant flux maintenance projection

Relations

• Amends: SIST EN IEC 63013:2020 - LED packages - Long-term luminous and radiant flux maintenance projection
• Effective Date: 09-Feb-2021

Overview

SIST EN IEC 63013:2020/A1:2022 is a pivotal European standard developed by the European Committee for Electrotechnical Standardization (CENELEC) focusing on LED packages and their long-term luminous and radiant flux maintenance projections. This amendment aligns the European standard with the latest advancements and international methodologies for assessing and predicting the long-term performance of LED packages in terms of their light output and radiant flux. It provides standardized procedures and incorporates important references, such as ANSI/IES LM-80-20 and TM-21-19, to ensure reliable, repeatable, and comparable test results across the LED lighting industry.

By establishing consistent methods for performance projection, SIST EN IEC 63013:2020/A1:2022 helps manufacturers, lighting designers, and end users assess the longevity and quality of LED packages, supporting confident decision-making for a wide range of applications.

Key Topics

• Long-Term Performance Prediction: Establishes processes for projecting how LED packages maintain luminous and radiant flux over time.
• Flux Maintenance Testing: Specifies testing requirements and data collection methods in accordance with ANSI/IES LM-80-20.
• Projection Methods: Adopts the exponential-fit-function procedure from ANSI/IES TM-21-19 for projecting future luminous and radiant flux values, with an alternative border function method for scenarios where the exponential approach is unsuitable.
• Data Interpolation and Adjustment: Outlines the necessity of temperature interpolation (using the Arrhenius formula) and adjustments to results following well-defined procedures.
• Comprehensive Reporting: Sets out clear requirements for reporting test durations, methods, and results, ensuring data transparency and industry comparability.

Applications

SIST EN IEC 63013:2020/A1:2022 is broadly applicable to general lighting services and horticultural lighting that utilize LED packages. Practical implementation of this standard impacts various sectors:

• Lighting Product Development: Enables manufacturers to test and project the longevity of their LED packages, facilitating product improvements and innovation.
• Quality Assurance: Helps verify LED performance, offering reliable evidence of lifespan claims for certification and labeling.
• Procurement and Specification: Supports lighting designers and project planners in selecting LED packages with documented, projected flux maintenance data, reducing risks associated with premature lumen depreciation.
• Energy Efficiency Programs: Provides a robust framework for regulatory and voluntary programs that require documentation of lighting product longevity and performance.
• Horticultural Lighting: Assesses photon and radiant flux for greenhouse or plant-centric applications, aiding in light planning and crop yield optimization.

Related Standards

To ensure consistency and compatibility in LED flux maintenance projections, SIST EN IEC 63013:2020/A1:2022 references and aligns with several key international standards:

• ANSI/IES TM-21-19: Technical Memorandum for projecting long-term lumen, photon, and radiant flux maintenance of LED light sources. Central to the projection methodology in EN IEC 63013.
• ANSI/IES LM-80-20: Approved method for measuring luminous flux and color maintenance of LED packages, arrays, and modules. Essential for initial data gathering.
• IEC 63013:2017: Original international framework for LED package maintenance projections.
• ISO/IEC Directives: Underlying guidance for international standard development, ensuring harmonization and clarity.

By harmonizing European and international approaches, SIST EN IEC 63013:2020/A1:2022 plays a crucial role in supporting the standardization and reliability of LED lighting and its long-term performance claims. This fosters greater confidence in the durability and value of LED-based lighting solutions across diverse sectors.

Standards Content (Sample)

SLOVENSKI STANDARD
01-februar-2022
Ohišja svetlečih diod (LED) - Dolgoročni načrt vzdrževanja svetlobnega in
sevalnega toka - Dopolnilo A1 (IEC 63013:2017/AMD1:2021)
LED packages - Long-term luminous and radiant flux maintenance projection (IEC
63013:2017/AMD1:2021)
LED-Packages - Langfristige Vorhersage des Lichtstromerhalts und des Erhalts der
Strahlungsleistung (IEC 63013:2017/AMD1:2021)
LED encapsulées - Projection à long terme concernant la conservation du flux lumineux
et du flux énergétique (IEC 63013:2017/AMD1:2021)
Ta slovenski standard je istoveten z: EN IEC 63013:2019/A1:2021
ICS:
29.140.99 Drugi standardi v zvezi z Other standards related to
žarnicami lamps
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 63013:2019/A1

NORME EUROPÉENNE
EUROPÄISCHE NORM December 2021
ICS 29.140.99
English Version
LED packages - Long-term luminous and radiant flux
maintenance projection
(IEC 63013:2017/AMD1:2021)
LED encapsulées - Projection à long terme concernant la LED-Packages - Langfristige Vorhersage des
conservation du flux lumineux et du flux énergétique Lichtstromerhalts und des Erhalts der Strahlungsleistung
(IEC 63013:2017/AMD1:2021) (IEC 63013:2017/AMD1:2021)
This amendment A1 modifies the European Standard EN IEC 63013:2019; it was approved by CENELEC on 2021-11-30. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 63013:2019/A1:2021 E

European foreword
The text of document 34A/2233(F)/CDV, future IEC 63013/AMD1, prepared by SC 34A “Electric light
sources” of IEC/TC 34 “Lighting” was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 63013:2019/A1:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022–08–30
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024–11–30
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 63013:2017/AMD1:2021 was approved by CENELEC as a
European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by
(mod), the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.
The Annex ZA of EN IEC 63013:2019 applies with the following changes:
Publication Year Title EN/HD Year

Replace the existing second, third and fourth references with the following two new references:
ANSI/IES TM-21–19 - Technical Memorandum: Projecting Long - -
Term Lumen, Photon, and Radiant Flux
Maintenance of LED Light Sources
ANSI/IES LM-80–20 - Approved Method: Measuring Luminous - -
Flux and Color Maintenance of LED
Packages, Arrays, and Modules
IEC 63013 ®
Edition 1.0 2021-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AM ENDMENT 1
AM ENDEMENT 1
LED packages – Long-term luminous and radiant flux maintenance projection

LED encapsulées – Projection à long terme concernant la conservation du flux

lumineux et du flux énergétique

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.140.99 ISBN 978-2-8322-1037-6

– 2 – IEC 63013:2017/AMD1:2021
© IEC 2021
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
LED PACKAGES – LONG-TERM LUMINOUS AND
RADIANT FLUX MAINTENANCE PROJECTION

AMENDMENT 1
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
...