iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 916:1996

(Main)

Gymnastic equipment - Vaulting boxes - Functional and safety requirements, test methods

Gymnastic equipment - Vaulting boxes - Functional and safety requirements, test methods

This standard specifies functional requirements and specific safety requirements in addition to the general safety requirements in prEN 913. This standard is applicable to five types of vaulting boxes.

Turngeräte - Sprungkästen - Funktionelle und sicherheitstechnische Anforderungen, Prüfverfahren

Diese Norm legt funktionelle Anforderungen und besondere sicherheitstechnische Anforderungen zusätzlich zu den allgemeinen sicherheitstechnischen Anforderungen in prEN 913 fest. Diese Norm gilt für fünf Typen von Sprungkästen.

Matériel de gymnastique - Plints a parois verticales - Exigences fonctionnelles et de sécurité, méthodes d'essai

La présente norme spécifie les exigences fonctionnelles et les exigences spécifiques de sécurité s'ajoutant aux exigences générales de sécurité du prEN 913. La présente norme s'applique a cinq types de plints a parois verticales.

Gymnastic equipment - Vaulting boxes

General Information

Status
Withdrawn
Publication Date
30-Nov-1996
Withdrawal Date
30-Jun-2003
ICS
97.220.30 - Indoor sports equipment
Technical Committee
SPO - Sports
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Jul-2003
Due Date
01-Jul-2003
Completion Date
01-Jul-2003
Ref Project
EN 916:1996 - Gymnastic equipment - Vaulting boxes - Functional and safety requirements, test methods

Relations

Replaced By
SIST EN 916:2003 - Gymnastic equipment - Vaulting boxes - Requirements and test methods including safety
Effective Date
01-Jul-2003

Buy Standard

EN 916:1996EN 916:1996
PreviousNext
Standard
EN 916:1996
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 916:1996
01-december-1996
Gymnastic equipment - Vaulting boxes
Gymnastic equipment - Vaulting boxes - Functional and safety requirements, test
methods
Turngeräte - Sprungkästen - Funktionelle und sicherheitstechnische Anforderungen,
Prüfverfahren
Matériel de gymnastique - Plints a parois verticales - Exigences fonctionnelles et de
sécurité, méthodes d'essai
Ta slovenski standard je istoveten z: EN 916:1996
ICS:
97.220.30 Oprema za dvoranske športe Indoor sports equipment
SIST EN 916:1996 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

-----------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 913:2019+A1:2021(Main)
Gymnastic equipment - General safety requirements and test methods
EN 913:2018+A1:2021

This document specifies general safety requirements and test methods for all pieces of gymnastic and sports equipment and for all pieces of equipment for the use of physical education, training and competition, intended for use supervised by a competent person and not specified in other, individual standards and/or federation rules.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 20957-7:2021(Main)
Stationary training equipment - Part 7: Rowing equipment, additional specific safety requirements and test methods (ISO 20957-7:2020)
EN ISO 20957-7:2021

This part of ISO 20957 specifies safety requirements for rowing equipment in addition to the general safety requirements of ISO 20957-1 and should be read in conjunction with it.
This part of ISO 20957 is applicable to rowing type stationary training equipment, hereinafter referred to as rowing equipment, within the classes H, S and I as well as classes A, B and C regarding accuracy.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 20957-2:2021(Main)
Stationary training equipment - Part 2: Strength training equipment, additional specific safety requirements and test methods (ISO 20957-2:2020)
EN ISO 20957-2:2021

This part of ISO 20957 specifies additional safety requirements for stationary strength training equipment in addition to the general safety requirements of ISO 20957-1.
This part of ISO 20957 is applicable to stationary training equipment type strength training equipment with stack weight resistance or other means of resistance like elastic cords, hydraulic, pneumatic, electrical, magnetic, springs and externally loaded weights (type 2) (hereinafter referred to as training equipment) with the classes H, S and I according to ISO 20957-1.
NOTE Free-weight barbell racks are subject to the requirements of ISO 20957-4 and ISO 20957-1.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 914:2020(Main)
Gymnastic equipment - Parallel bars and combination asymmetric/parallel bars - Requirements and test methods including safety
EN 914:2020

This document specifies functional requirements (see Clause 3) and specific safety requirements in addition to the general safety requirements in EN 913 (see Clause 4), which is read in conjunction with this standard.
This document is applicable to two types of parallel bars (see Table 1) intended for use under supervision of a competent person.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 20957-9:2017/A1:2019(Amendment)
Stationary training equipment - Part 9: Elliptical trainers, additional specific safety requirements and test methods - Amendment 1 (ISO 20957-9:2016/Amd 1:2019)
EN ISO 20957-9:2016/A1:2019
  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 748:2013+A1:2018(Main)
Playing field equipment - Football goals - Functional and safety requirements, test methods
EN 748:2013+A1:2018

This document specifies the functional requirements for 4 types and 2 sizes (see Clause 3) and the safety requirements (see Clause 4) for football goals.
It is applicable to football goals for training and competition in outdoor sports facilities and indoor arenas.
The following football goals are excluded:
a)   EN 16579: goals with a size of 5,00 m × 2,00 m and 7,32 m × 2,44 m and with a total weight of ≥ 10 kg and ≤ 42 kg (total weight includes net, net fixing and any permanently attached anchoring or stabilizing system);
b)   EN 16664: (lightweight goals).

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 20957-8:2018(Main)
Stationary training equipment - Part 8: Steppers, stairclimbers and climbers - Additional specific safety requirements and test methods (ISO 20957-8:2017)
EN ISO 20957-8:2017

This document specifies safety requirements for stepper, stairclimber and climber machines (hereafter
called training equipment) performed from either a standing or sitting position. The requirements are
in addition to the general safety requirements of ISO 20957-1, with which this document is intended to
be read in conjunction.
This document is applicable to stationary training equipment type stepper, stairclimber and climber
training equipment, within classes S and H. Additional requirements are provided for accuracy class A.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 20957-10:2018(Main)
Stationary training equipment - Part 10: Exercise bicycles with a fixed wheel or without freewheel - Additional specific safety requirements and test methods (ISO 20957-10:2017)
EN ISO 20957-10:2017

This part of EN 957 specifies safety requirements for exercise bicycles with a fixed wheel or without freewheel that have an inertia of > 0,6 kg x m² in addition to the general safety requirements of EN 957-1 and should be read in conjunction with it. This part of EN 957 is applicable to stationary training equipment type exercise bicycle with a fixed wheel or without freewheel (type 10) within the classes S and H. Any attachment provided with the exercise bicycle with a fixed wheel or without freewheel for the performance of additional exercises are subject to the requirements of EN 957-1.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 20957-4:2017(Main)
Stationary training equipment - Part 4: Strength training benches, additional specific safety requirements and test methods (ISO 20957-4:2016)
EN ISO 20957-4:2016

This part of ISO 20957 specifies safety requirements for stationary strength training benches and free-standing barbell racks used to perform exercises during use in addition to the general safety requirements of ISO 20957 1 and should be read in conjunction with it. This part of ISO 20957 is applicable to stationary training equipment type benches (type 4) (hereinafter referred to as benches) with the classes S, H and I.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 20957-5:2017(Main)
Stationary training equipment - Part 5: Stationary exercise bicycles and upper body crank training equipment, additional specific safety requirements and test methods (ISO 20957-5:2016)
EN ISO 20957-5:2016

This part of ISO 20957 specifies safety requirements for stationary exercise bicycles and upper body crank training equipment in addition to the general safety requirements of ISO 20957 1. This part of ISO 20957 is applicable to stationary training equipment type stationary exercise bicycles and upper body crank training equipment (type 5) as defined in Clause 3 within the classes S, H, I and A, B, C according to ISO 20957-1. Any attachment provided with the stationary exercise bicycles and upper body crank training equipment for the performance of additional exercises are subject to the requirements of ISO 20957 1. This part of ISO 20957 is not applicable to roller stands as they cannot be made safe in a reasonable way.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day