Stationary training equipment - Part 9: Elliptical trainers, additional specific safety requirements and test methods - Amendment 1 (ISO 20957-9:2016/Amd 1:2019)

Stationäre Trainingsgeräte - Ellipsen-Trainer, zusätzliche besondere sicherheitstechnische Anforderungen und Prüfverfahren - Änderung 1 (ISO 20957-9:2016/Amd 1:2019)

Dieser Teil von ISO 20957 legt zusätzliche sicherheitstechnische Anforderungen an Ellipsen Trainer zusätzlich zu den allgemeinen sicherheitstechnischen Anforderungen nach ISO 20957 1 fest.
Dieser Teil von ISO 20957 legt sicherheitstechnische Anforderungen an kardiovaskuläre Geräte mit vorgegebenen Bewegungsabläufen und/oder Pendelbewegungen fest, die für den Kontakt der Füße des Nutzers mit einer Trittfläche ausgelegt sind, unter Ausnahme von Steppern, die in stehender oder sitzender Position betrieben werden.

Équipement d'entraînement fixe - Partie 9: Appareils d'entraînement elliptiques, exigences spécifiques de sécurité et méthodes d'essai supplémentaires - Amendement 1 (ISO 20957-9:2016/Amd 1:2019)

Nepremična oprema za vadbo - 9. del: Pedalniki, dodatne posebne varnostne zahteve in preskusne metode - Dopolnilo A1 (ISO 20957-9:2016/Amd 1:2019)

General Information

Status
Published
Public Enquiry End Date
19-Apr-2018
Publication Date
06-Jun-2019
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
27-May-2019
Due Date
01-Aug-2019
Completion Date
07-Jun-2019

RELATIONS

Buy Standard

Amendment
SIST EN ISO 20957-9:2017/A1:2019
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 20957-9:2017/A1:2019
01-julij-2019
Nepremična oprema za vadbo - 9. del: Pedalniki, dodatne posebne varnostne
zahteve in preskusne metode - Dopolnilo A1 (ISO 20957-9:2016/Amd 1:2019)

Stationary training equipment - Part 9: Elliptical trainers, additional specific safety

requirements and test methods - Amendment 1 (ISO 20957-9:2016/Amd 1:2019)
Stationäre Trainingsgeräte - Ellipsen-Trainer, zusätzliche besondere
sicherheitstechnische Anforderungen und Prüfverfahren - Änderung 1 (ISO 20957-
9:2016/Amd 1:2019)
Équipement d'entraînement fixe - Partie 9: Appareils d'entraînement elliptiques,

exigences spécifiques de sécurité et méthodes d'essai supplémentaires - Amendement 1

(ISO 20957-9:2016/Amd 1:2019)
Ta slovenski standard je istoveten z: EN ISO 20957-9:2016/A1:2019
ICS:
97.220.30 Oprema za dvoranske športe Indoor sports equipment
SIST EN ISO 20957-9:2017/A1:2019 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 20957-9:2017/A1:2019
---------------------- Page: 2 ----------------------
SIST EN ISO 20957-9:2017/A1:2019
EN ISO 20957-9:2016/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2019
EUROPÄISCHE NORM
ICS 97.220.30
English Version
Stationary training equipment - Part 9: Elliptical trainers,
additional specific safety requirements and test methods -
Amendment 1 (ISO 20957-9:2016/Amd 1:2019)

Équipement d'entraînement fixe - Partie 9: Appareils Stationäre Trainingsgeräte - Ellipsen-Trainer,

d'entraînement elliptiques, exigences spécifiques de zusätzliche besondere sicherheitstechnische

sécurité et méthodes d'essai supplémentaires - Anforderungen und Prüfverfahren - Änderung 1 (ISO

Amendement 1 (ISO 20957-9:2016/Amd 1:2019) 20957-9:2016/Amd 1:2019)

This amendment A1 modifies the European Standard EN ISO 20957-9:2016; it was approved by CEN on 14 June 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of

this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the

same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20957-9:2016/A1:2019 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 20957-9:2017/A1:2019
EN ISO 20957-9:2016/A1:2019 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

---------------------- Page: 4 ----------------------
SIST EN ISO 20957-9:2017/A1:2019
EN ISO 20957-9:2016/A1:2019 (E)
European foreword

This document (EN ISO 20957-9:2016/A1:2019) has been prepared by Technical Committee ISO/TC 83

"Sports and other recreational facilities and equipment" in collaboration with Technical Committee

CEN/TC 136 “Sports, playground and other recreational facilities and equipment” the secretariat of

which is held by DIN.

This Amendment to the European Standard EN ISO 20957-9:2016 shall be given the status of a national

standard, either by publication of an identical text or by endorsement, at the latest by November 2019,

and conflicting national standards shall be withdrawn at the latest by November 2019.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

This document has been prepared under a mandate given to CEN by the European Commission and the

European Free Trade Association.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the

following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,

Croatia, Cyprus, Czech Republic, De
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.