SIST EN 10163-3:1997

Delivery requirements for surface condition of hot rolled steel plates and sections - Part 3: Sections

This part 3 in addition to part 1 specifies the general delivery requirements for surface condition of sections to which the EURONORMS mentioned in clause 2 apply and applies to all surfaces excluding edges.

Lieferbedingungen für die Oberflächenbeschaffenheit von warmgewalzten Blech, Breitflachstahl und Profile von Stahl - Teil 3: Profile

Dieser Teil 3 enthält in Verbindung mit Teil 1 die Lieferbedingungen für die Oberflächenbeschaffenheit von Profilen nach den in Abschnitt 2 genannten EURONORMEN und gilt für alle Oberflächen mit Ausnahme der Profilkanten.

Conditions de livraison relatives a l'état de surface des tôles, larges plats et profilés en acier laminés a chaud - Partie 3: Profils

La présente troisieme partie complete la premiere partie en indiquant les prescription de qualité de surface des profilés auxquels s'appliquent les EURONORM mentionés au chapitre 2 et s'appliquent a toutes les surfaces, a l'exclusion des rives.

Dobavni pogoji za videz površine vroče valjane pločevine, ploščatega jekla in profilov - 3. del: Profili

General Information

• Status: Withdrawn
• Publication Date: 30-Nov-1997
• Withdrawal Date: 31-Jan-2005
• ICS: 77.140.50 - Flat steel products and semi-products
• ICS: 77.140.70 - Steel profiles
• Technical Committee: IFEK - Ferrous metals
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 01-Feb-2005
• Due Date: 01-Feb-2005
• Completion Date: 01-Feb-2005
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Mandate: M/BC/CEN/87/15 - ECISS - 2nd programme
• Ref Project: EN 10163-3:1991 - Delivery requirements for surface condition of hot rolled steel plates and sections - Part 3: Sections

Relations

• Replaced By: SIST EN 10163-3:2005 - Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 3: Sections
• Effective Date: 01-Feb-2005

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Lieferbedingungen für die Oberflächenbeschaffenheit von warmgewalzten Blech, Breitflachstahl und Profile von Stahl - Teil 3: ProfileConditions de livraison relatives a l'état de surface des tôles, larges plats et profilés en acier laminés a chaud - Partie 3: ProfilsDelivery requirements for surface condition of hot rolled steel plates an
...