SIST EN 13587:2004
(Main)Bitumen and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method
Bitumen and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method
This European standard specifies a method for determining the tensile properties of a bituminous binder, in particular those of a polymer modified bitumen, by means of a tensile test. NOTE: The tensile properties, more particularly the tensile strength and elongation, at the yield point and on fracture, are customarily used as a criterion for assessing the quality of these materials.
Bitumen und bitumenhaltige Bindemittel - Bestimmung der Streckeigenschaften von bitumenhaltigen Bindemitteln mit dem Zugprüfverfahren
Diese Europäische Norm legt ein Verfahren zur Bestimmung der Streckeigenschaften von bitumenhaltigen Bindemitteln, insbesondere solcher von polymermodifiziertem Bitumen, mit einer Zugprüfung fest. ANMERKUNG: Die Streckeigenschaften, insbesondere Zugfestigkeit und Dehnung an der Streckgrenze und beim Bruch, werden üblicherweise als ein Kriterium für die Qualität dieses Materials verwendet.
Bitumes et liants bitumineux - Détermination des caractéristiques de traction des liants bitumineux par la méthode d'essai de traction
La présente Norme Européenne prescrit une méthode permettant déterminer les caractéristiques de traction des liants bitumineux, en particulier celles de bitumes modifiés par des polymeres, au moyen d'un essai de traction.
NOTE Les caractéristiques de traction, et plus particulierement la contrainte de traction, l'allongement et l'énergie, au seuil d'écoulement et a la rupture, sont habituellement utilisées comme criteres de jugement de la qualité de ces matériaux.
AVERTISSEMENT - L'utilisation de la présente Norme européenne implique l'intervention de produits, d'opérations et d'équipements a caractere dangereux. La présente norme européenne n'est pas censée aborder tous les problemes de sécurité concernés par son usage. Il est de la responsabilité de l'utilisateur de consulter et d'établir des regles de sécurité et d'hygiene appropriées et de déterminer l'applicabilité des restrictions réglementaires avant utilisation.
Bitumen in bitumenska veziva - Določevanje nateznih lastnosti bitumenskih veziv - Natezna preskusna metoda
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 13587:2004
01-september-2004
%LWXPHQLQELWXPHQVNDYH]LYD'RORþHYDQMHQDWH]QLKODVWQRVWLELWXPHQVNLKYH]LY
1DWH]QDSUHVNXVQDPHWRGD
Bitumen and bituminous binders - Determination of the tensile properties of bituminous
binders by the tensile test method
Bitumen und bitumenhaltige Bindemittel - Bestimmung der Streckeigenschaften von
bitumenhaltigen Bindemitteln mit dem Zugprüfverfahren
Bitumes et liants bitumineux - Détermination des caractéristiques de traction des liants
bitumineux par la méthode d'essai de traction
Ta slovenski standard je istoveten z: EN 13587:2003
ICS:
75.140 Voski, bitumni in drugi naftni Waxes, bituminous materials
proizvodi and other petroleum products
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
SIST EN 13587:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 13587:2004
---------------------- Page: 2 ----------------------
SIST EN 13587:2004
EUROPEAN STANDARD
EN 13587
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2003
ICS 91.100.50
English version
Bitumen and bituminous binders - Determination of the tensile
properties of bituminous binders by the tensile test method
Bitumes et liants bitumineux - Détermination des Bitumen und bitumenhaltige Bindemittel - Bestimmung der
caractéristiques de traction des liants bitumineux par la Streckeigenschaften von bitumenhaltigen Bindemitteln mit
méthode d'essai de traction dem Zugprüfverfahren
This European Standard was approved by CEN on 21 November 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13587:2003 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 13587:2004
EN 13587:2003 (E)
Foreword.3
1 Scope .4
2 Normative references .4
3 Terms and definitions.4
4 Principle.5
5 Apparatus .5
6 Preparation and conservation of samples .6
7 Procedure .6
8 Calculation and expression of results.7
9 Precision.7
10 Test report .7
2
---------------------- Page: 4 ----------------------
SIST EN 13587:2004
EN 13587:2003 (E)
Foreword
This document EN 13587:2003 has been prepared by Technical Committee CEN/TC 336 “Bituminous binders”, the
secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by June 2004, and conflicting national standards shall be withdrawn at the latest by
June 2004.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard : Austria, Belgium, Czech Republic, Denmark, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,
Slovakia, Spain, Sweden, Switzerland and the United Kingdom.
3
---------------------- Page: 5 ----------------------
SIST EN 13587:2004
EN 13587:2003 (E)
1 Scope
This European Standard specifies a method for determining the tensile properties of a bituminous binder, in
particular those of a polymer modified bitumen, by means of a tensile test.
NOTE The tensile properties, more particularly the tensile stress, the elongation and energy, at the yield point and on
fracture, are customarily used as a criterion for assessing the quality of these materials.
WARNING — The use of this European Standard may involve hazardous materials, operations and
equipment. This European Standard does not purport to address all of the safety problems associated with
its use. It is the responsibility of the user of this European Standard to establish appropriate safety and
health practices and determine the applicability of regulatory limitations prior to use.
2 Normative references
This European Standard incorporates by dated or undated reference, provisions from other publications. These
normative references are cited at the appropriate places in the text, and the publications are listed hereafter. For
dated references, subsequent amendments to or revisions of any of these publications apply to this European
Standard only when incorporated in it by amendment or revision. For un
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.